A review on single switch Dc-Dc converter for renewable energy based applications

The renewable energy as input needs a boost voltage to balance the utility grid and so the conversion of boost up voltage process is required. The DC-DC converters play a major role in high voltage gain and efficiency in the renewable energy conversion system. It's very important to maintain the system efficiency. The voltage stress is reduced by the reduction in the semiconductor devices. Hence single switch DC-DC converter plays a major role in maintaining efficiency and voltage stress which increases the voltage transmission ratio.

[1]  W. A. Peterson,et al.  Boost-buck push-pull converter for very wide input range single stage power conversion , 1995, Proceedings of 1995 IEEE Applied Power Electronics Conference and Exposition - APEC'95.

[2]  K.I. Hwu,et al.  A Novel voltage-boosting converter with passive voltage clamping , 2008, 2008 IEEE International Conference on Sustainable Energy Technologies.

[3]  Simon S. Ang.  Power-Switching Converters , 1995 .

[4]  Fred C. Lee,et al.  Small-signal analysis and design of weighted voltage-mode control for a multiple-output forward converter , 1993 .

[5]  Yung-Ruei Chang,et al.  High-Efficiency Power Conversion System for Kilowatt-Level Stand-Alone Generation Unit With Low Input Voltage , 2008, IEEE Transactions on Industrial Electronics.

[6]  Dragan Maksimovic,et al.  Switching converters with wide DC conversion range , 1991 .

[7]  Gun-Woo Moon,et al.  Derivation, Analysis, and Comparison of Nonisolated Single-Switch High Step-up Converters With Low Voltage Stress , 2015, IEEE Transactions on Power Electronics.

[8]  Fred C. Lee,et al.  High-efficiency, high step-up DC-DC converters , 2003 .

[9]  Shih-Ming Chen,et al.  A Cascaded High Step-Up DC–DC Converter With Single Switch for Microsource Applications , 2011, IEEE Transactions on Power Electronics.

[10]  Sewan Choi,et al.  High Step-Up Soft-Switched Converters Using Voltage Multiplier Cells , 2013, IEEE Transactions on Power Electronics.

[11]  Harry A. Owen,et al.  Analysis and design of a push-pull current-fed converter , 1981, 1981 IEEE Power Electronics Specialists Conference.

[12]  René P. Torrico-Bascope,et al.  Highly Efficient High Step-Up Converter for Fuel-Cell Power Processing Based on Three-State Commutation Cell , 2010, IEEE Transactions on Industrial Electronics.

[13]  F. Luo.  Switched-Capacitorized DC/DC Converters , 2009, 2009 4th IEEE Conference on Industrial Electronics and Applications.

[14]  Harry A. Owen,et al.  Small-signal modeling of a push-pull current-fed converter , 1982, 1982 IEEE Power Electronics Specialists conference.

[15]  Slobodan Cuk,et al.  Advances in switched mode power conversion , 1981 .

[16]  Adrian Ioinovici,et al.  Boost converter with high voltage gain using a switched capacitor circuit , 2003, Proceedings of the 2003 International Symposium on Circuits and Systems, 2003. ISCAS '03..

[17]  Ming-Hui Chen,et al.  Cascade Cockcroft–Walton Voltage Multiplier Applied to Transformerless High Step-Up DC–DC Converter , 2013, IEEE Transactions on Industrial Electronics.

[18]  I. Barbi,et al.  A single-switch flyback-current-fed DC-DC converter , 1998 .

[19]  Robert W. Erickson,et al.  Fundamentals of Power Electronics , 2001 .

[20]  Marty Brown.  7 – Cross-Regulation of the Outputs , 1990 .

[21]  Adrian Ioinovici,et al.  Switched-Capacitor/Switched-Inductor Structures for Getting Transformerless Hybrid DC–DC PWM Converters , 2008, IEEE Transactions on Circuits and Systems I: Regular Papers.

[22]  Tsorng-Juu Liang,et al.  Novel high-efficiency step-up converter , 2004 .

[23]  K. Hwu,et al.  High-step-up single-switch DC–DC converter with low voltage spike , 2015 .

[24]  Fang Lin Luo,et al.  Six self-lift DC-DC converters, voltage lift technique , 2001, IEEE Trans. Ind. Electron..

[25]  Oded Abutbul,et al.  Step-up switching-mode converter with high voltage gain using a switched-capacitor circuit , 2003 .