LCA implementation in the selection of thermal enhanced mortars for energetic rehabilitation of school buildings

The first aim of the present work is to assess the environmental impact of specific rendering mortars able to be applied in the vertical opaque envelopes of an existing school building from the 80's built in Portugal, to reduce condensation effects and heat transfer. Ordinary cement and hydraulic lime mortars where compared to cork added and EPS added mortars. Energy performance and energy audit of the building was estimated and compared to the original behaviour of the school building. LCA variant called cradle to gate was used to compare the environmental impacts of building thermal rehabilitation and its effect on the energy consumption for heating and operational energy (OE), for different mortars service life. The simulation made in the school show that ordinary cement or hydraulic lime mortars, leads to much higher global warming potential, where CO2 emissions are more than 3 tonnes per building intervention. The use of mortars with cork addition, leads to a reduction of CO2 emission up to 30% and 20% reduction in embodied energy (EE), when compared to traditional mortars. Cork mortars present smaller EE than EPS mortars. Results shows that it is possible to slightly reduce OE by using materials with lower EE value.

[1]  Åsa Jönsson,et al.  Tools and methods for environmental assessment of building products—methodological analysis of six selected approaches , 2000 .

[2]  Hans-Jörg Althaus,et al.  Relevance of simplifications in LCA of building components , 2009 .

[3]  Sarel Lavy,et al.  Identification of parameters for embodied energy measurement: A literature review , 2010 .

[4]  Adolf Acquaye,et al.  Operational vs. embodied emissions in buildings—A review of current trends , 2013 .

[5]  C. Meyer.  The greening of the concrete industry , 2009 .

[6]  Christopher R. Iddon,et al.  Embodied and operational energy for new-build housing: A case study of construction methods in the UK , 2013 .

[7]  Adolf Acquaye,et al.  A Stochastic Hybrid Embodied Energy and CO2_eq Intensity Analysis of Building and Construction Processes in Ireland , 2010 .

[8]  Sean Armstrong,et al.  A Cost-Optimal Assessment of Buildings in Ireland Using Directive 2010/31/EU of the Energy Performance of Buildings Recast , 2014 .

[9]  Sevastianos Mirasgedis,et al.  European residential buildings and empirical assessment of the Hellenic building stock, energy consumption, emissions and potential energy savings , 2007 .

[10]  Luisa F. Cabeza,et al.  Life cycle assessment (LCA) and life cycle energy analysis (LCEA) of buildings and the building sector: A review , 2014 .

[11]  Paul Kenny,et al.  From net energy to zero energy buildings: Defining life cycle zero energy buildings (LC-ZEB) , 2010 .

[12]  V. Malhotra.  Role of supplementary cementing materials in reducing greenhouse gas emissions , 1999 .

[13]  Ignacio Zabalza Bribián,et al.  Life cycle assessment in buildings: State-of-the-art and simplified LCA methodology as a complement for building certification , 2009 .

[14]  Fábio Luiz Teixeira Gonçalves,et al.  Cork-based mortars for thermal bridges correction in a dwelling: Thermal performance and cost evaluation , 2014 .

[15]  Paulina Faria,et al.  Cement-cork mortars for thermal bridges correction. Comparison with cement-EPS mortars performance , 2013 .