Experimental study of wet granulation in fluidized bed: impact of the binder properties on the granule morphology.

In this work, the effect of the physicochemical properties of aqueous hydroxypropyl-cellulose (HPC) binder solutions and different pharmaceutical excipients (mannitol and anhydrous CaHPO(4)) on the agglomeration kinetics and granule properties were investigated. First, a particle size distribution (PSD) analysis together with a detailed analysis of morphological properties of the excipient particles were performed. Second, the viscosity, density, surface tension and size of the spray droplets of binder solutions with different HPC concentrations were determined and wetting characteristics of the binders on the excipients were measured. Third, several fluid bed wet granulation experiments were conducted for pure excipients and their blends with binder solution of different HPC concentrations in a pilot plant Wurster granulator. The observed granule growth for different binder concentrations was a strong function of the binder concentration and the excipient solubility. For mannitol, a significant "coating" period followed by a slow granule growth was observed for the case with the diluted 5% binder. The "coating" period was significantly shorter for the 10% HPC binder and did not exist for the 15% HPC for which immediate and fast granule growth was observed. For anhydrous CaHPO(4) (trademark A-TAB), no growth was observed for the 10% HPC binder and a long coating period followed by fast granule growth was observed for the 15% HPC. Simple physically based criteria were also evaluated, which employ the morphological properties of excipients (size and surface roughness) together with physical properties of the used binder for prediction of the coating versus agglomeration regime at given flow conditions (collision velocity). As expected, a preferential coalescence and growth of the mannitol granules from the blend of mannitol+A-TAB was observed. Finally, the mechanical and morphological properties of the produced granules were measured and correlated to the HPC concentration of the binder used in the experiments. A clear correlation between the granule porosity (evaluated by X-ray tomography) and the binder concentration was found for the mannitol granules.

[1]  František Štěpánek,et al.  Computer-Aided Product Design: Granule Dissolution , 2004 .

[2]  Gavin K. Reynolds,et al.  Breakage in granulation: A review , 2005 .

[3]  Frantisek Stepánek,et al.  Droplet morphologies on particles with macroscopic surface roughness. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[4]  Gabriel I. Tardos,et al.  Evolution and structure of drying material bridges of pharmaceutical excipients: studies on a microscope slide , 2003 .

[5]  James D. Litster,et al.  Coalescence of deformable granules in wet granulation processes , 2000 .

[6]  Steven A. Cryer,et al.  Observations and process parameter sensitivities in fluid‐bed granulation , 2003 .

[7]  T. Abberger,et al.  The effect of powder type, free moisture and deformation behaviour of granules on the kinetics of fluid-bed granulation. , 2001, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[8]  B. J. Ennis,et al.  A microlevel-based characterization of granulation phenomena , 1991 .

[9]  France.,et al.  Droplet Spreading: Partial Wetting Regime Revisited , 1998, cond-mat/9810040.

[10]  J. Bouffard,et al.  Influence of Process Variable and Physicochemical Properties on the Granulation Mechanism of Mannitol in a Fluid Bed Top Spray Granulator , 2005, Drug development and industrial pharmacy.

[11]  Michael J. Hounslow,et al.  Studies of fluid bed granulation in an industrial R&D context , 2005 .

[12]  A. A. Adetayo,et al.  Unifying approach to modeling granule coalescence mechanisms , 1997 .

[13]  Ian T. Cameron,et al.  Process systems modelling and applications in granulation: A review , 2005 .

[14]  H. Martin,et al.  Modeling the droplet deposition behavior on a single particle in fluidized bed spray granulation process , 2001 .

[15]  P. Mort,et al.  Critical parameters and limiting conditions in binder granulation of fine powders , 1997 .

[16]  D. Bika,et al.  Strength and morphology of solid bridges in dry granules of pharmaceutical powders , 2005 .

[17]  František Štěpánek,et al.  Computer simulation of granule microstructure formation , 2005 .

[18]  James D. Litster,et al.  The Science and Engineering of Granulation Processes , 2004 .

[19]  B. Guignon,et al.  Helping to choose operating parameters for a coating fluid bed process , 2003 .

[20]  K. Saleh,et al.  Influence of the physicochemical properties on the growth of solid particles by granulation in fluidized bed , 2001 .