Hydrogen Fuel : Production, Transport, and Storage
暂无分享,去创建一个
[1] Andreas Züttel,et al. Hydrogen storage methods , 2004, Naturwissenschaften.
[2] O. Vosikovsky,et al. Allowable defect sizes in a sour crude oil pipeline for corrosion fatigue conditions , 1983 .
[3] U. Weimar,et al. Understanding the fundamental principles of metal oxide based gas sensors; the example of CO sensing with SnO2 sensors in the presence of humidity , 2003 .
[4] Dwight D. Viehland,et al. Sound-resonance hydrogen sensor , 2003 .
[5] R. C. Hughes,et al. Solid‐State Hydrogen Sensors Using Palladium‐Nickel Alloys: Effect of Alloy Composition on Sensor Response , 1995 .
[6] Roland Pitts,et al. INTERFACIAL STABILITY OF THIN FILM HYDROGEN SENSORS , 2000 .
[7] R. J. Walter,et al. Cyclic-load crack growth in ASME SA-105 grade II steel in high-pressure hydrogen at ambient temperature , 1976 .
[8] Rita van der Vorst,et al. Issues affecting the acceptance of hydrogen fuel , 2004 .
[9] Spyros Sklavounos,et al. Validation of turbulence models in heavy gas dispersion over obstacles. , 2004, Journal of hazardous materials.
[10] Andrew Burke,et al. Hydrogen Storage Options: Technologies and Comparisons for Light-Duty Vehicle Applications , 2005 .
[11] Michael A. Butler,et al. Fiber Optic Sensor for Hydrogen Concentrations near the Explosive Limit , 1991 .
[12] R. C. Hughes,et al. Sensors for detecting molecular hydrogen based on Pd metal alloys , 1997 .
[13] A. Appleby. The Electrochemical Engine for Vehicles , 1999 .
[14] Craig A. Grimes,et al. A room-temperature TiO2-nanotube hydrogen sensor able to self-clean photoactively from environmental contamination , 2004 .
[15] X. Bao,et al. Distributed brillouin scattering sensor for discrimination of wall-thinning defects in steel pipe under internal pressure. , 2004, Applied optics.
[16] C. Kirchsteiger. Availability of Community Level Information on Industrial Risks in the EU , 2000 .
[17] Masaru Hirata,et al. Large Renewables - Hydrogen Energy Systems: Gathering and Transmission Pipelines for Windpower and other Diffuse, Dispersed Sources , 2003 .
[18] The DOE National Hydrogen Storage Project: Recent Progress in On-Board Vehicular Hydrogen Storage , 2005 .
[19] E. H. Phelps,et al. Steels for seamless hydrogen pressure vessels , 1975 .
[20] W. Jasionowski,et al. Gas distribution equipment in hydrogen service , 1980 .
[21] Francisco Espinosa-Loza,et al. Vehicular storage of hydrogen in insulated pressure vessels , 2005 .
[22] Ulrich Welp,et al. Fabrication of Palladium Nanotubes and Their Application in Hydrogen Sensing , 2005 .
[23] Lee J.H.S.,et al. Initiation of Gaseous Detonation , 1977 .
[24] G. Keith,et al. Transmitting 4,000 MW of new windpower from north Dakota to Chicago: new HVDC electric lines or hydrogen pipeline , 2002, IEEE Power Engineering Society Summer Meeting,.
[25] Spyros Sklavounos,et al. Simulation of Coyote series trials—Part I:: CFD estimation of non-isothermal LNG releases and comparison with box-model predictions , 2006 .
[26] Z. Yaniv,et al. Achieving the Potential of Nano Gas Sensors , 2006 .
[27] R. Banerjee,et al. Net energy analysis of hydrogen storage options , 2005 .
[28] F. Favier,et al. Hydrogen Sensors and Switches from Electrodeposited Palladium Mesowire Arrays , 2001, Science.
[29] Joel Martinez-Frias,et al. Analytical and experimental evaluation of insulated pressure vessels for cryogenic hydrogen storage , 2000 .
[30] M Momirlan,et al. Current status of hydrogen energy , 2002 .
[31] Y. Yürüm. Hydrogen Energy System , 1995 .
[32] Hongjie Dai,et al. Functionalized Carbon Nanotubes for Molecular Hydrogen Sensors , 2001 .
[33] A. Salomonsson,et al. Hydrogen interaction with platinum and palladium metal–insulator–semiconductor devices , 2005 .
[34] K. S. Dhathathreyan,et al. An improved polymer electrolyte-based amperometric hydrogen sensor , 2003 .
[35] J. Pangborn,et al. Technical prospects for commercial and residential distribution and utilization of hydrogen , 1976 .
[36] F. A. Lewis,et al. The Palladium-Hydrogen System , 1967, Platinum Metals Review.
[37] A. Pohl. A review of wireless SAW sensors , 2000, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.
[38] W. Jasionowski,et al. Suitability of gas distribution equipment in hydrogen service , 1979 .
[39] R. D. Venter,et al. Modelling of stationary bulk hydrogen storage systems , 1997 .
[40] Ibrahim Dincer,et al. Technical, environmental and exergetic aspects of hydrogen energy systems , 2002 .
[41] Ghazi A. Karim,et al. Hydrogen as a spark ignition engine fuel , 2003 .
[42] J. Wolf,et al. Liquid Hydrogen for Automotive Application Next Generation Fuel for FC and ICE Vehicles , 2005 .
[43] N. Kahraman,et al. Internal combustion engines fueled by natural gas—hydrogen mixtures , 2004 .
[44] L. K. Heung. ON-BOARD HYDROGEN STORAGE FOR A CITY TRANSIT BUS , 1998 .
[45] W. Wlodarski,et al. A layered surface acoustic wave ZnO/LiTaO3 structure with a WO3 selective layer for hydrogen gas sensing , 2003 .
[46] P. Unwin. Instrumentation and electroanalytical chemistry , 2003 .