A new mathematical model for predicting flow stress of X70HD under hot deformation

To realize numerical simulation of rolling and obtain the hot forming process parameters for X70HD steel, the flow stress behaviors of X70HD steel were investigated under different temperatures (820−1100 °C) and strain rates (0.01−10 s−1) on a Gleeble-3500 thermo-simulation machine. A new flow stress model was established. The linear and exponential relationship methods were applied to the parameters with respect to temperature and deformation rates. The rise of curve ends under certain conditions was analyzed. The flow stress of X70HD steel predicted by the proposed model agrees well with the experimental results. So, it greatly improves the precision of the metal thermoplastic processing through finite element method and practical application of engineering.

[1]  A. Laasraoui,et al.  Recrystallization of austenite after deformation at high temperatures and strain rates—Analysis and modeling , 1991 .

[2]  Jie Zhou,et al.  A characterization for the dynamic recrystallization kinetics of as-extruded 7075 aluminum alloy based on true stress–strain curves , 2012 .

[3]  L. Du,et al.  Austenite Recrystallization and Controlled Rolling of Low Carbon Steels , 2006 .

[4]  Jian Wang,et al.  Study on hot deformation behavior of carbon structural steel with flow stress , 2012 .

[5]  Zhenshan Cui,et al.  Recrystallization of 30Cr2Ni4MoV ultra-super-critical rotor steel during hot deformation. Part I: Dynamic recrystallization , 2011 .

[6]  Xiurong Zuo,et al.  Microstructure and properties of pipeline steel with a ferrite/martensite dual-phase microstructure , 2011 .

[7]  John J. Jonas,et al.  A one-parameter approach to determining the critical conditions for the initiation of dynamic recrystallization , 1996 .

[8]  Naksoo Kim,et al.  The prediction of deformation behavior and interfacial friction under hot working conditions using inverse analysis , 2008 .

[9]  J. Torralba,et al.  Hot deformation behaviour and flow stress prediction of 7075 aluminium alloy powder compacts during compression at elevated temperatures , 2012 .

[10]  J. Jonas,et al.  The Avrami kinetics of dynamic recrystallization , 2009 .

[11]  J. Jonas,et al.  A new approach to modeling the flow curve of hot deformed austenite , 2011 .

[12]  C. Shang,et al.  Investigation on the microstructure and toughness of coarse grained heat affected zone in X-100 multi-phase pipeline steel with high Nb content , 2012 .

[13]  Xueqin Zhang,et al.  Effect of volume fraction of bainite on microstructure and mechanical properties of X80 pipeline steel with excellent deformability , 2012 .

[14]  Y. Lin,et al.  A new mathematical model for predicting flow stress of typical high-strength alloy steel at elevated high temperature , 2010 .

[15]  Soheil Solhjoo,et al.  Analysis of flow stress up to the peak at hot deformation , 2009 .

[16]  K. Wu,et al.  Effect of fast cooling process on microstructure and toughness of heat affected zone in high strength pipeline steel X120 , 2012 .

[17]  John J. Jonas,et al.  Prediction of steel flow stresses at high temperatures and strain rates , 1991 .