Optical microscope angular illumination analysis.

For high precision applications of optical microscopes, it is critical to achieve symmetrical angular illumination intensity at the sample plane, in addition to uniform spatial irradiance achieved by Köhler illumination. A correlation between the angular illumination asymmetry and the contrast in the image of a line grating target was demonstrated as the target is scanned through focus. Using this correlation, we present a novel, yet simple method of experimentally evaluating the angular illumination asymmetry (ANILAS) at the sample plane of an optical microscope across the field of view. This ANILAS map is expected to be a useful method for assessing the illumination condition of optical systems.

[1]  Joseph P. Kirk,et al.  Pupil illumination: in-situ measurement of partial coherence , 1998, Advanced Lithography.

[2]  Richard M. Silver,et al.  Application of through-focus focus-metric analysis in high resolution optical metrology , 2005, SPIE Advanced Lithography.

[3]  Richard M. Silver,et al.  Optical illumination and critical dimension analysis using the through-focus focus metric method , 2006, SPIE Optics + Photonics.

[4]  W. Talbot.  Facts relating to optical science , 1836 .

[5]  Andrew R. Neureuther,et al.  Linear phase ring illumination monitor , 2003 .

[6]  Stephen P. Renwick,et al.  Illumination pupil fill measurement and analysis and its application in scanner V-H bias characterization for 130-nm node and beyond , 2003, SPIE Advanced Lithography.

[7]  Egon Marx,et al.  High-resolution optical overlay metrology , 2004, SPIE Advanced Lithography.

[8]  Soichi Inoue,et al.  Measurement of effective source shift using a grating-pinhole mask , 1999, Advanced Lithography.

[9]  Richard M. Silver,et al.  Köhler illumination for high-resolution optical metrology , 2006, SPIE Advanced Lithography.

[10]  Yan Borodovsky.  Impact of local partial coherence variations on exposure tool performance , 1995, Advanced Lithography.

[11]  E. Marx.  Images of strips on and trenches in substrates. , 2007, Applied optics.

[12]  Hong Du,et al.  Potential causes of across field CD variation , 1997, Advanced Lithography.

[13]  Joseph J. Bendik,et al.  A simulation performance framework using in situ metrology , 2004, SPIE Advanced Lithography.

[14]  Egon Marx,et al.  Calibration strategies for overlay and registration metrology , 2003, SPIE Advanced Lithography.

[15]  Mark P. Davidson.  Analytic waveguide solutions and the coherence probe microscope , 1991 .

[16]  Egon Marx,et al.  Evaluation of new in-chip and arrayed line overlay target designs , 2004, SPIE Advanced Lithography.

[17]  Egon Marx,et al.  Scatterfield microscopy for extending the limits of image-based optical metrology. , 2007, Applied optics.