Three-step learning strategy for designing 15Cr ferritic steels with enhanced strength and plasticity at elevated temperature

[1]  Jincheng Wang,et al.  Establishing reduced-order process-structure linkages from phase field simulations of dendritic grain growth during solidification , 2022, Computational Materials Science.

[2]  Cheng-bin Shi,et al.  Precipitation and growth of laves phase and NbC during aging and its effect on tensile properties of a novel 15Cr–22Ni–1Nb austenitic heat-resistant steel , 2022, Materials Science and Engineering: A.

[3]  Haiyang Li,et al.  Influence of precipitates evolutions in δ-ferrite and austenite matrix on mechanical properties of alumina-forming austenitic steel , 2022, Materials Science and Engineering: A.

[4]  Jincheng Wang,et al.  Global‐Oriented Strategy for Searching Ultrastrength Martensitic Stainless Steels , 2022, Advanced Theory and Simulations.

[5]  S. Curtarolo,et al.  Machine learning for alloys , 2021, Nature Reviews Materials.

[6]  Osman Mamun,et al.  Machine learning augmented predictive and generative model for rupture life in ferritic and austenitic steels , 2021, npj Materials Degradation.

[7]  Xiaobing Hu,et al.  Tailoring nanoprecipitates for ultra-strong high-entropy alloys via machine learning and prestrain aging , 2021 .

[8]  Xiaobing Hu,et al.  A microstructure-informatic strategy for Vickers hardness forecast of austenitic steels from experimental data , 2021 .

[9]  A. Zieliński,et al.  Evolution of the microstructure and mechanical properties of HR3C austenitic stainless steel after ageing for up to 30,000 h at 650–750 °C , 2020, Materials Science and Engineering: A.

[10]  Y. Nose,et al.  Experimental Establishment of Phase Diagrams Guided by Uncertainty Sampling: An Application to the Deposition of Zn–Sn–P Films by Molecular Beam Epitaxy , 2020 .

[11]  D. Dunand,et al.  Effect of aging on coarsening- and creep resistance of a Ti-modified Fe–Ni–Al–Cr–Mo ferritic steel with L21/B2 composite precipitates , 2020 .

[12]  P. Duan,et al.  Study on microstructure and mechanical properties of P92 steel after high-temperature long-term aging at 650°C , 2020 .

[13]  P. Zhang,et al.  Impact toughness of a modified HR3C austenitic steel after long-term thermal exposure at 650 °C , 2019, Materials Science and Engineering: A.

[14]  Zhijun Wang,et al.  Two-way design of alloys for advanced ultra supercritical plants based on machine learning , 2018, Computational Materials Science.

[15]  I. Singh,et al.  Influence of intermediate rolling on mechanical behavior of modified 9Cr-1Mo steel , 2018, Materials Science and Engineering: A.

[16]  P. Liaw,et al.  Increasing the creep resistance of Fe-Ni-Al-Cr superalloys via Ti additions by optimizing the B2/L21 ratio in composite nano-precipitates , 2018, Acta Materialia.

[17]  Peng Liu,et al.  Microstructures and Mechanical Properties of a Newly Developed Austenitic Heat Resistant Steel , 2018, Acta Metallurgica Sinica (English Letters).

[18]  H. Bhadeshia,et al.  A novel ultra-high strength maraging steel with balanced ductility and creep resistance achieved by nanoscale β-NiAl and Laves phase precipitates , 2018 .

[19]  T. Lookman,et al.  Experimental search for high-temperature ferroelectric perovskites guided by two-step machine learning , 2018, Nature Communications.

[20]  T. Lookman,et al.  Multi-objective Optimization for Materials Discovery via Adaptive Design , 2018, Scientific Reports.

[21]  Andreas Krause,et al.  A tutorial on Gaussian process regression: Modelling, exploring, and exploiting functions , 2016, bioRxiv.

[22]  J. Hogden,et al.  Statistical inference and adaptive design for materials discovery , 2017 .

[23]  D. Dunand,et al.  Effect of titanium additions upon microstructure and properties of precipitation-strengthened Fe-Ni-Al-Cr ferritic alloys , 2017 .

[24]  Dierk Raabe,et al.  Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation , 2017, Nature.

[25]  A. Deschamps,et al.  Influence of microstructural parameters on the mechanical properties of oxide dispersion strengthened Fe-14Cr steels , 2017 .

[26]  T. Lookman,et al.  Multi-objective optimization techniques to design the Pareto front of organic dielectric polymers , 2016 .

[27]  Bartosz Krawczyk,et al.  Learning from imbalanced data: open challenges and future directions , 2016, Progress in Artificial Intelligence.

[28]  James Theiler,et al.  Adaptive Strategies for Materials Design using Uncertainties , 2016, Scientific Reports.

[29]  Yoshiaki Toda,et al.  Improving the high-temperature creep strength of 15Cr ferritic creep-resistant steels at temperatures of 923–1023 K , 2016 .

[30]  Yoshiaki Toda,et al.  Effect of precipitation behavior on creep strength of 15%Cr ferritic steels at high temperature between 923 and 1023 K , 2014 .

[31]  L. Krüger,et al.  Effect of Manganese on Microstructure and Mechanical Properties of Cast High Alloyed CrMnNi‐N Steels , 2013 .

[32]  Jun Li,et al.  Effect of Cu addition on microstructure and mechanical properties of 15%Cr super martensitic stainless steel , 2012 .

[33]  C. Park,et al.  Effects of aluminum on the microstructure and phase transformation of TRIP steels , 2012, Metals and Materials International.

[34]  Li Zhou,et al.  Effect of Carbon Content on Microstructure and Mechanical Properties of 9 to 12 pct Cr Ferritic/Martensitic Heat-Resistant Steels , 2012, Metallurgical and Materials Transactions A.

[35]  Yoshiaki Toda,et al.  Effect of nickel and cobalt addition on the precipitation-strength of 15Cr ferritic steels , 2011 .

[36]  D. Rojas,et al.  9%Cr heat resistant steels: Alloy design, microstructure evolution and creep response at 650 °C , 2011 .

[37]  D. Rojas,et al.  Investigations on the growth kinetics of Laves phase precipitates in 12% Cr creep-resistant steels: Experimental and DICTRA calculations , 2010 .

[38]  William Stafford Noble,et al.  Support vector machine , 2013 .

[39]  F. Abe,et al.  Influence of Chemical Composition and Heat Treatment Condition on Impact Toughness of 15Cr Ferritic Creep Resistant Steel , 2005 .

[40]  F. Abe,et al.  Improvement in Creep Strength of Precipitation Strengthened 15Cr Ferritic Steel by Controlling Carbon and Nitrogen Contents , 2005 .

[41]  F. Abe,et al.  Effects of W and Co on long-term creep strength of precipitation strengthened 15Cr ferritic heat resistant steels , 2003 .

[42]  J. Vilk,et al.  Martensitic/Ferritic Super Heat-resistant 650°C Steels - Design and Testing of Model Alloys , 2002 .

[43]  Fujimitsu Masuyama,et al.  History of Power Plants and Progress in Heat Resistant Steels , 2001 .

[44]  Feng Yan,et al.  Balancing data for generalizable machine learning to predict glass-forming ability of ternary alloys , 2022, Scripta Materialia.

[45]  Jincheng Wang,et al.  Structure-property modeling scheme based on optimized microstructural information by two-point statistics and principal component analysis , 2022, Journal of Materials Informatics.

[46]  Feng He,et al.  Uncovering the eutectics design by machine learning in the Al–Co–Cr–Fe–Ni high entropy system , 2020 .

[47]  Jun Li,et al.  Effect of aluminum on microstructure, mechanical properties and pitting corrosion resistance of ultra-pure 429 ferritic stainless steels , 2015 .

[48]  A. Shan,et al.  Effect of thermo-mechanical treatment on microstructure and mechanical properties of P92 heat resistant steel , 2013 .

[49]  M. Calcagnotto,et al.  On the Effect of Manganese on Grain Size Stability and Hardenability in Ultrafine-Grained Ferrite/Martensite Dual-Phase Steels , 2011, Metallurgical and Materials Transactions A.