Testing the new stochastic neutronic code ANET in simulating safety important parameters

Abstract ANET (Advanced Neutronics with Evolution and Thermal hydraulic feedback) is an under development Monte Carlo code for simulating both GEN II/III reactors as well as innovative nuclear reactor designs, based on the high energy physics code GEANT3.21 of CERN. ANET is built through continuous GEANT3.21 applicability amplifications, comprising the simulation of particles’ transport and interaction in low energy along with the accessibility of user-provided libraries and tracking algorithms for energies below 20 MeV, as well as the simulation of elastic and inelastic collision, capture and fission. Successive testing applications performed throughout the ANET development have been utilized to verify the new code capabilities. In this context the ANET reliability in simulating certain reactor parameters important to safety is here examined. More specifically the reactor criticality as well as the neutron fluence and fission rates are benchmarked and validated. The Portuguese Research Reactor (RPI) after its conversion to low enrichment in U-235 and the OECD/NEA VENUS-2 MOX international benchmark were considered appropriate for the present study, the former providing criticality and neutron flux data and the latter reaction rates. Concerning criticality benchmarking, the subcritical, Training Nuclear Reactor of the Aristotle University of Thessaloniki (TNR-AUTh) was also analyzed. The obtained results are compared with experimental data from the critical infrastructures and with computations performed by two different, well established stochastic neutronics codes, i.e. TRIPOLI-4.8 and MCNP5. Satisfactory agreement is found with both measurements and independent computations, verifying thus ANET’s ability to successfully simulate important parameters of critical and subcritical systems.

[1]  Yishu Qiu,et al.  RMC – A Monte Carlo code for reactor core analysis , 2015 .

[2]  N. A. Hanan.  A Monte Carlo burnup code linking MCNP and REBUS. , 1998 .

[3]  I. Bashter,et al.  Studies on Production of Neutrons in the Spallation Reactions Using the Monte Carlo Code MCNPX , 2012 .

[4]  N. Barradas,et al.  Validation of the Monte Carlo model supporting core conversion of the Portuguese Research Reactor (RPI) for neutron fluence rate determinations , 2010 .

[5]  Sedat Goluoglu,et al.  Verification of KENO V.a and KENO-VI Using Analytical Benchmarks , 2008 .

[6]  B. J. Toppel.  User's guide for the REBUS-3 fuel cycle analysis capability , 1983 .

[7]  N. P. Barradas,et al.  Core conversion anaylses for the Portuguese Research Reactor. , 2006 .

[8]  Yousry Gohar,et al.  MCNPX and MCB Coupled Methodology for the Burnup Calculation of the KIPT Accelerator Driven Subcritical System , 2009 .

[9]  M. Jong,et al.  Projectile-fragment yields as a probe for the collective enhancement in the nuclear level density , 1998 .

[10]  C. V. Parks.  OVERVIEW OF ORIGEN2 AND ORIGEN-S: CAPABILITIES AND LIMITATIONS , 1992 .

[11]  Paul K. Romano,et al.  Development of burnup methods and capabilities in Monte Carlo code RMC , 2013 .

[12]  Wenxi Tian,et al.  Development of a MCNP–ORIGEN burn-up calculation code system and its accuracy assessment , 2014 .

[13]  M. Varvayanni,et al.  Comparing neutronics codes performance in analyzing a fresh-fuelled research reactor core , 2014 .

[14]  Arun Kumar,et al.  The neutron spectrum of AmBe neutron sources , 1973 .

[15]  Carlo Fiorina,et al.  An extended version of the SERPENT-2 code to investigate fuel burn-up and core material evolution of the Molten Salt Fast Reactor , 2013 .

[16]  Jorge Silva,et al.  Criticality qualification of a new Monte Carlo code for reactor core analysis , 2009 .

[17]  P. Savva,et al.  Investigating the breeding capabilities of hybrid soliton reactors , 2013 .

[18]  P. Savva,et al.  Building a dynamic code to simulate new reactor concepts , 2012 .

[19]  Benoit Forget,et al.  The OpenMC Monte Carlo particle transport code , 2012 .