A slot spiral in carbon-fibre composite laminate as a conformal load-bearing antenna

Conformal load-bearing antenna structures, which afford load-bearing structures with radar capability, are a promising technology to reduce weight and drag of air vehicles. This article presents an investigation of the mechanical and electromagnetic performance of slot log-spiral antenna in carbon-fibre composite structures. Compared with traditional rectangular slots, equiangular slot spiral antenna is found to offer broader bandwidth and better mechanical strength. Through experimental testing and finite element analyses, a new tip design is proposed that can significantly reduce the stress concentration of the non-load-bearing log-spiral antenna. Results of mechanical tests also show that the compressive strength of a carbon-fibre composite plate featuring a spiral slot is comparable with that pertinent to a plate with a circular hole of the same size. Filling the slots with epoxy resin can further enhance the compressive strength.

[1]  Lan Yao,et al.  Design and fabrication of microstrip antennas integrated in three dimensional orthogonal woven composites , 2009 .

[2]  John L. Volakis,et al.  Embroidered e-fiber-polymer composites for conformal and load bearing antennas , 2010, 2010 IEEE Antennas and Propagation Society International Symposium.

[3]  Kara Peters,et al.  The Effects of Embedded Optical Fiber Density on the Impact Response and Lifetime of Laminated Composites , 2010 .

[4]  J. Volakis,et al.  Polymer-Carbon Nanotube Sheets for Conformal Load Bearing Antennas , 2010, IEEE Transactions on Antennas and Propagation.

[5]  J.L. Volakis,et al.  A planar slot spiral for multi-function communications apertures , 1998, IEEE Antennas and Propagation Society International Symposium. 1998 Digest. Antennas: Gateways to the Global Network. Held in conjunction with: USNC/URSI National Radio Science Meeting (Cat. No.98CH36.

[6]  Paul J Callus,et al.  Novel Concepts for Conformal Load-Bearing Antenna Structure , 2008 .

[7]  J. Volakis,et al.  A new planar feed for slot spiral antennas , 1996 .

[8]  Paul J. Callus,et al.  Conformal Load-Bearing Antenna Structure for Australian Defence Force Aircraft , 2007 .

[9]  E. Gschwendtner,et al.  Multi-service dual-mode spiral antenna for conformal integration into vehicle roofs , 2000, IEEE Antennas and Propagation Society International Symposium. Transmitting Waves of Progress to the Next Millennium. 2000 Digest. Held in conjunction with: USNC/URSI National Radio Science Meeting (C.

[10]  S. Hurlebaus,et al.  Seismic Response Control Using Shape Memory Alloys: A Review , 2011 .

[11]  Yaowen Yang,et al.  A novel two-degrees-of-freedom piezoelectric energy harvester , 2013 .

[12]  K Ghorbani,et al.  A Planar Dual-Arm Equiangular Spiral Antenna , 2010, IEEE Transactions on Antennas and Propagation.

[13]  Yongwei Zhang,et al.  Archimedean and Equiangular Slot Spiral Antennas for UWB Communications , 2006, 2006 European Microwave Conference.

[14]  Gregory P. Carman,et al.  Compression Strength of Composites Containing Embedded Sensors or Actuators , 1994 .

[15]  M. Fardis,et al.  CIRCULAR SLOT WITH A NOVEL CIRCULAR MICROSTRIP OPEN ENDED MICROSTRIP FEED FOR UWB APPLICATIONS , 2007 .

[16]  K. Ghorbani,et al.  Capacitively Fed Cavity-Backed Slot Antenna in Carbon-Fiber Composite Panels , 2012, IEEE Antennas and Wireless Propagation Letters.

[17]  M. Dapino,et al.  Radio frequency patch antenna reconfiguration with Ni–Ti shape memory alloy switches , 2013 .

[18]  J.L. Volakis,et al.  New techniques for extremely broadband planar slot spiral antennas , 1999, IEEE Antennas and Propagation Society International Symposium. 1999 Digest. Held in conjunction with: USNC/URSI National Radio Science Meeting (Cat. No.99CH37010).