Variation of the impact duration during the in vitro insertion of acetabular cup implants.

[1]  Pietro Cerveri,et al.  Patient-specific acetabular shape modelling: comparison among sphere, ellipsoid and conchoid parameterisations , 2014, Computer methods in biomechanics and biomedical engineering.

[2]  R. Bader,et al.  Advanced material modelling in numerical simulation of primary acetabular press-fit cup stability , 2012, Computer methods in biomechanics and biomedical engineering.

[3]  J P Cobb,et al.  A hierarchy of computationally derived surgical and patient influences on metal on metal press-fit acetabular cup failure. , 2012, Journal of biomechanics.

[4]  G. Haïat,et al.  Influence of healing time on the ultrasonic response of the bone-implant interface. , 2012, Ultrasound in medicine & biology.

[5]  A. C. Taylor,et al.  The influence of acetabular cup material on pelvis cortex surface strains, measured using digital image correlation. , 2012, Journal of Biomechanics.

[6]  G Wavreille,et al.  Femoral head to neck offset after hip resurfacing is critical for range of motion. , 2012, Clinical Biomechanics.

[7]  J. Tong,et al.  Damage evolution in acetabular reconstructs under physiological testing in a saline environment. , 2012, Journal of biomechanics.

[8]  Frank G Shellock,et al.  Assessment of MRI issues at 3-Tesla for metallic surgical implants: findings applied to 61 additional skin closure staples and vessel ligation clips , 2012, Journal of Cardiovascular Magnetic Resonance.

[9]  M. Itoman,et al.  Hammering Sound Frequency Analysis and Prevention of Intraoperative Periprosthetic Fractures during Total Hip Arthroplasty , 2011, Hip international : the journal of clinical and experimental research on hip pathology and therapy.

[10]  Silke Hecht,et al.  Magnetic resonance imaging susceptibility artifacts due to metallic foreign bodies. , 2011, Veterinary radiology & ultrasound : the official journal of the American College of Veterinary Radiology and the International Veterinary Radiology Association.

[11]  Guillaume Haiat,et al.  Numerical simulation of ultrasonic wave propagation for the evaluation of dental implant biomechanical stability. , 2011, The Journal of the Acoustical Society of America.

[12]  Masaru Higa,et al.  Effect of acetabular component anteversion on dislocation mechanisms in total hip arthroplasty. , 2011, Journal of biomechanics.

[13]  Guillaume Haïat,et al.  Ultrasonic evaluation of dental implant biomechanical stability: an in vitro study. , 2011, Ultrasound in medicine & biology.

[14]  Guillaume Haiat,et al.  Micro-Brillouin scattering measurements in mature and newly formed bone tissue surrounding an implant. , 2011, Journal of biomechanical engineering.

[15]  P. Knott,et al.  A comparison of magnetic and radiographic imaging artifact after using three types of metal rods: stainless steel, titanium, and vitallium. , 2010, The spine journal : official journal of the North American Spine Society.

[16]  F. Amirouche,et al.  The effect of under-reaming on the cup/bone interface of a press fit hip replacement. , 2010, Journal of biomechanical engineering.

[17]  Clifford W Colwell,et al.  Cementless femoral fixation in total hip arthroplasty. , 2010, American journal of orthopedics.

[18]  N. Verdonschot,et al.  Computational assessment of press-fit acetabular implant fixation: The effect of implant design, interference fit, bone quality, and frictional properties , 2010, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[19]  K. Akca,et al.  Meta-analysis of methods used to assess implant stability. , 2009, The International journal of oral & maxillofacial implants.

[20]  Ilse Jonkers,et al.  In vivo evaluation of a vibration analysis technique for the per-operative monitoring of the fixation of hip prostheses , 2009, Journal of orthopaedic surgery and research.

[21]  Kenneth A Buckwalter,et al.  Total hip arthroplasty in patients with bone deficiency of the acetabulum. , 2008, Radiographics : a review publication of the Radiological Society of North America, Inc.

[22]  Marco Viceconti,et al.  Can the rasp be used to predict intra-operatively the primary stability that can be achieved by press-fitting the stem in cementless hip arthroplasty? , 2008, Clinical biomechanics.

[23]  Angelo Cappello,et al.  Intra-operative evaluation of cementless hip implant stability: a prototype device based on vibration analysis. , 2007, Medical engineering & physics.

[24]  K. An,et al.  Effects of screw eccentricity on the initial stability of the acetabular cup , 2007, International Orthopaedics.

[25]  J. Jansen,et al.  Evaluation of bone response to titanium-coated polymethyl methacrylate resin (PMMA) implants by X-ray tomography , 2007, Journal of materials science. Materials in medicine.

[26]  Hollis G Potter,et al.  Magnetic resonance imaging after total hip arthroplasty: evaluation of periprosthetic soft tissue. , 2004, The Journal of bone and joint surgery. American volume.

[27]  Gang Qi,et al.  How much can a vibrational diagnostic tool reveal in total hip arthroplasty loosening? , 2003, Clinical biomechanics.

[28]  J. Lotz,et al.  Impact biomechanics and pelvic deformation during insertion of press-fit acetabular cups. , 2002, The Journal of arthroplasty.

[29]  A. Toni,et al.  Initial stability of a cementless acetabular cup design: experimental investigation on the effect of adding fins to the rim of the cup. , 2001, Artificial organs.

[30]  C. Colwell,et al.  The Harris-Galante Porous acetabular component at intermediate follow-up. , 2001, Orthopedics.

[31]  A. Georgiou,et al.  Accurate diagnosis of hip prosthesis loosening using a vibrational technique. , 2001, Clinical biomechanics.

[32]  P. Pellicci,et al.  Primary total hip replacement with a noncemented acetabular component , 2000 .

[33]  B. Espehaug,et al.  The Norwegian Arthroplasty Register: 11 years and 73,000 arthroplasties , 2000, Acta orthopaedica Scandinavica.

[34]  N Meredith,et al.  Assessment of implant stability as a prognostic determinant. , 1998, The International journal of prosthodontics.

[35]  W H Harris,et al.  Factors influencing stability at the interface between a porous surface and cancellous bone: a finite element analysis of a canine in vivo micromotion experiment. , 1997, Journal of biomedical materials research.

[36]  N Meredith,et al.  Quantitative determination of the stability of the implant-tissue interface using resonance frequency analysis. , 1996, Clinical oral implants research.

[37]  T. Brown,et al.  Reamed surface topography and component seating in press-fit cementless acetabular fixation. , 1995, The Journal of arthroplasty.

[38]  J. Hollis,et al.  Initial Stability of Porous Coated Acetabular Implants: The Effect of Screw Placement, Screw Tightness, Defect Type, and Oversize Implants , 1994, Clinical orthopaedics and related research.

[39]  W. Maloney,et al.  A quantitative in vitro assessment of fit and screw fixation on the stability of a cementless hemispherical acetabular component. , 1994, The Journal of arthroplasty.

[40]  R. Huiskes,et al.  Failed innovation in total hip replacement. Diagnosis and proposals for a cure. , 1993, Acta orthopaedica Scandinavica.

[41]  W Schulte,et al.  The Periotest method. , 1992, International dental journal.

[42]  F. Kummer,et al.  Stability of press-fit acetabular cups. , 1992, The Journal of arthroplasty.

[43]  D. Hungerford,et al.  The initial stability of uncemented acetabular components. , 1992, The Journal of bone and joint surgery. British volume.

[44]  H Bereiter,et al.  Cementless press-fit cup. Principles, experimental data, and three-year follow-up study. , 1989, Clinical orthopaedics and related research.

[45]  G. Brindley,et al.  The uncemented total hip arthroplasty. Intraoperative femoral fractures. , 1988, Clinical orthopaedics and related research.

[46]  J. M. Lee,et al.  Observations on the Effect of Movement on Bone Ingrowth into Porous‐Surfaced Implants , 1986, Clinical orthopaedics and related research.

[47]  C. Francis,et al.  LOWER RISK OF THROMBOEMBOLIC DISEASE AFTER TOTAL HIP REPLACEMENT WITH NON-CEMENTED THAN WITH CEMENTED PROSTHESES , 1986, The Lancet.

[48]  S. Cook,et al.  Interface mechanics and bone growth into porous Co-Cr-Mo alloy implants. , 1985, Clinical orthopaedics and related research.

[49]  C. Engh,et al.  Hip arthroplasty with a Moore prosthesis with porous coating. A five-year study. , 1983, Clinical orthopaedics and related research.

[50]  R M Pilliar,et al.  The optimum pore size for the fixation of porous-surfaced metal implants by the ingrowth of bone. , 1980, Clinical orthopaedics and related research.

[51]  C. Arndt,et al.  Experimental evidence of impingement induced strains at the interface and the periphery of an embedded acetabular cup implant. , 2012, Journal of biomechanical engineering.

[52]  M. Kulej,et al.  Influence of cementless cup surface on stability and bone fixation 2 years after total hip arthroplasty. , 2012, Acta of bioengineering and biomechanics.

[53]  M. Morlock,et al.  Deformation characteristics and eigenfrequencies of press-fit acetabular cups. , 2011, Clinical biomechanics.

[54]  C. Engh,et al.  Porous-coated hip replacement. The factors governing bone ingrowth, stress shielding, and clinical results. , 1987, The Journal of bone and joint surgery. British volume.

[55]  C. Engh,et al.  THE FACTORS GOVERNING BONE INGROWTH, STRESS SHIELDING, AND CLINICAL RESULTS , 1987 .

[56]  A M Weinstein,et al.  Interface mechanics of porous titanium implants. , 1981, Journal of biomedical materials research.