Design of Highly Efficient Wideband RF Polar Transmitters Using the Envelope-Tracking Technique

This paper discusses the design issues of highly efficient and monolithic wideband RF polar transmitters, especially the ones that use the envelope-tracking (ET) technique. Besides first reviewing the current state-of-the-art polar transmitters in the literature, three focus topics will be discussed: 1) the system-on-a-chip (SoC) design considerations of the monolithic polar transmitter using ET versus EER (envelope elimination and restoration); 2) the design of highly efficient envelope amplifier capable of achieving the high efficiency, current, bandwidth, accuracy and noise specifications required for wideband signals; and 3) the design of high-efficiency monolithic Si-based class E power amplifiers (PAs) suitable for ET-based RF polar transmitters. A design prototype of a polar transmitter using ET and a monolithic SiGe PA that passed the stringent low-band EDGE (Enhanced Data rates for GSM Evolution) transmit mask with 45% overall transmitter system efficiency will be given; the simulated data of the entire polar transmitter system is also compared against the measurement. Further investigations on how to solve the technical challenges to successfully implement linear and high-efficiency ET-based polar transmitter for broadband wireless applications such as WiBro/WiMAX are also discussed.

[1]  E. McCune.  Polar modulation and bipolar RF power devices , 2005, Proceedings of the Bipolar/BiCMOS Circuits and Technology Meeting, 2005..

[2]  Feipeng Wang,et al.  An Improved Power-Added Efficiency 19-dBm Hybrid Envelope Elimination and Restoration Power Amplifier for 802.11g WLAN Applications , 2006, IEEE Transactions on Microwave Theory and Techniques.

[3]  Pallab Midya,et al.  Tracking power converter for supply modulation of RF power amplifiers , 2001, 2001 IEEE 32nd Annual Power Electronics Specialists Conference (IEEE Cat. No.01CH37230).

[4]  Peter M. Asbeck,et al.  Multifunctional RF Transmitters for Next Generation Wireless Transceivers , 2007, 2007 IEEE International Symposium on Circuits and Systems.

[5]  S. C. Cripps,et al.  RF Power Amplifiers for Wireless Communications , 1999 .

[6]  Feipeng Wang,et al.  A Monolithic High-Efficiency 2.4-GHz 20-dBm SiGe BiCMOS Envelope-Tracking OFDM Power Amplifier , 2007, IEEE Journal of Solid-State Circuits.

[7]  B. Wilkins.  Polaris Total Radio/sup TM/, a highly integrated RF solution for GSM/GPRS and EDGE , 2003, IEEE Radio Frequency Integrated Circuits (RFIC) Symposium, 2003.

[8]  R.B. Staszewski,et al.  A digital-to-RF-amplitude converter for GSM/GPRS/EDGE in 90-nm digital CMOS , 2005, 2005 IEEE Radio Frequency integrated Circuits (RFIC) Symposium - Digest of Papers.

[9]  L. Larson,et al.  Envelope tracking power amplifier with pre-distortion linearization for WLAN 802.11g , 2004, 2004 IEEE MTT-S International Microwave Symposium Digest (IEEE Cat. No.04CH37535).

[10]  G. Ewing,et al.  High-efficiency radio-frequency power amplifiers , 1964 .

[11]  M. Elliott,et al.  A polar modulator transmitter for EDGE , 2004, 2004 IEEE International Solid-State Circuits Conference (IEEE Cat. No.04CH37519).

[12]  Nathan O. Sokal,et al.  Class of High-Efficiency Tuned Switching Power Amplifiers , 2009 .

[13]  A.H. Yang,et al.  Monolithic Class E SiGe Power Amplifier Design with Wideband High-Efficiency and Linearity , 2006, 2006 International Symposium on VLSI Design, Automation and Test.

[14]  F. Raab.  Intermodulation distortion in Kahn-technique transmitters , 1996 .

[15]  Chris W. Liu,et al.  LOAD TRANSIENTS Load Transient Response of a DC / DC Converter in GSM / EDGE Handset Applications , 2007 .

[16]  P. Reynaert,et al.  A 1.75-GHz polar modulated CMOS RF power amplifier for GSM-EDGE , 2005, IEEE Journal of Solid-State Circuits.

[17]  W. McFarland,et al.  An IC for linearizing RF power amplifiers using envelope elimination and restoration , 1998, 1998 IEEE International Solid-State Circuits Conference. Digest of Technical Papers, ISSCC. First Edition (Cat. No.98CH36156).

[18]  Aaas News,et al.  Book Reviews , 1893, Buffalo Medical and Surgical Journal.

[19]  P ? ? ? ? ? ? ? % ? ? ? ? , 1991 .

[20]  M. Kumar,et al.  A 900-MHz fully integrated SOI power amplifier for single-chip wireless transceiver applications , 2000, IEEE Journal of Solid-State Circuits.

[21]  Stephan V. Schell,et al.  Polar modulator for multi-mode cell phones , 2003, Proceedings of the IEEE 2003 Custom Integrated Circuits Conference, 2003..

[22]  P. Midya,et al.  Buck or boost tracking power converter , 2004, IEEE Power Electronics Letters.

[23]  Michael Murray. Elliott.  Single sideband transmission by envelope elimination and restoration. , 1953 .

[24]  Changsik Yoo,et al.  A common-gate switched 0.9-W class-E power amplifier with 41% PAE in 0.25-/spl mu/m CMOS , 2001 .

[25]  P. Draxler,et al.  High Efficiency Envelope Tracking LDMOS Power Amplifier for W-CDMA , 2006, 2006 IEEE MTT-S International Microwave Symposium Digest.

[26]  Feipeng Wang,et al.  Fully-integrated highly-efficient RF Class E SiGe power amplifier with an envelope-tracking technique for EDGE applications , 2006, 2006 IEEE Radio and Wireless Symposium.

[27]  Thomas H. Lee.  The Design of CMOS Radio-Frequency Integrated Circuits , 1998 .

[28]  Meng-Chang Lee,et al.  All-digital PLL and GSM/EDGE transmitter in 90nm CMOS , 2005, ISSCC. 2005 IEEE International Digest of Technical Papers. Solid-State Circuits Conference, 2005..

[29]  Donald Y. C. Lie,et al.  "RF-SoC": Technology Enablers and Current Design Trends for Highly Integrated Wireless RF IC Transceivers , 2003, Int. J. Wirel. Opt. Commun..

[30]  P. Asbeck,et al.  High-Efficiency Envelope-Tracking W-CDMA Base-Station Amplifier Using GaN HFETs , 2006, IEEE Transactions on Microwave Theory and Techniques.

[31]  Donald Y.C. Lie,et al.  Linearization of Highly-Efficient Monolithic Class E SiGe Power Amplifiers with Envelope-Tracking (ET) and Envelope-Elimination-and-Restoration (EER) at 900MHz , 2007, 2007 6th IEEE Dallas Circuits and Systems Workshop on System-on-Chip.

[32]  Yan Li,et al.  Experimental investigations and behavior modeling for monolithic quasi-class E SiGe PA linearization , 2008, 2008 International Conference on Communications, Circuits and Systems.

[33]  J. Moon,et al.  High-Efficiency Hybrid EER Transmitter Using Optimized Power Amplifier , 2008, IEEE Transactions on Microwave Theory and Techniques.

[34]  Howard C. Luong,et al.  A 1-V CMOS power amplifier for Bluetooth applications , 2003, IEEE Trans. Circuits Syst. II Express Briefs.

[35]  F. Murden,et al.  A polar modulator transmitter for GSM/EDGE , 2004, IEEE Journal of Solid-State Circuits.

[36]  Robert H. Caverly,et al.  HF, VHF, and UHF systems and technology , 2002 .

[37]  Jennifer Chou.  Reducing the design complexity of next-generation handsets , 2005 .

[38]  George B. Norris,et al.  High efficiency CDMA RF power amplifier using dynamic envelope tracking technique , 2000, 2000 IEEE MTT-S International Microwave Symposium Digest (Cat. No.00CH37017).

[39]  Feipeng Wang,et al.  Highly Efficient and Linear Class E SiGe Power Amplifier Design , 2006, 2006 8th International Conference on Solid-State and Integrated Circuit Technology Proceedings.

[40]  N. O. Sokal.  Class-E switching-mode high-efficiency tuned RF/microwave power amplifier: improved design equations , 2000, 2000 IEEE MTT-S International Microwave Symposium Digest (Cat. No.00CH37017).

[41]  Pallab Midya.  Linear switcher combination with novel feedback , 2000, 2000 IEEE 31st Annual Power Electronics Specialists Conference. Conference Proceedings (Cat. No.00CH37018).

[42]  Paul R. Gray,et al.  A 1.9-GHz, 1-W CMOS class-E power amplifier for wireless communications , 1999 .

[43]  Frederick H. Raab,et al.  Idealized operation of the class E tuned power amplifier , 1977 .

[44]  Jeffrey G. Andrews,et al.  Fundamentals of WiMAX: Understanding Broadband Wireless Networking , 2007 .

[45]  R. Pullela,et al.  Quad-band GSM/GPRS/EDGE polar loop transmitter , 2004, IEEE Journal of Solid-State Circuits.

[46]  W. Bachtold,et al.  Lumped-element load-network design for class-E power amplifiers , 2006, IEEE Transactions on Microwave Theory and Techniques.

[47]  J.A. Cobos,et al.  Power supply for a radio transmitter with modulated supply voltage , 2004, Nineteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2004. APEC '04..

[48]  F. Raab,et al.  Power amplifiers and transmitters for RF and microwave , 2002 .

[49]  F.M. Ghannouchi,et al.  On the RF/DSP design for efficiency of OFDM transmitters , 2005, IEEE Transactions on Microwave Theory and Techniques.

[50]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[51]  L.E. Larson,et al.  Design of wide-bandwidth envelope-tracking power amplifiers for OFDM applications , 2005, IEEE Transactions on Microwave Theory and Techniques.

[52]  D. Kimball,et al.  Wideband envelope elimination and restoration power amplifier with high efficiency wideband envelope amplifier for WLAN 802.11g applications , 2005, IEEE MTT-S International Microwave Symposium Digest, 2005..

[53]  Antonino Scuderi,et al.  A VSWR-protected silicon bipolar RF power amplifier with soft-slope power control , 2005, IEEE Journal of Solid-State Circuits.

[54]  J.D. Popp,et al.  The limitations in applying analytic design equations for optimal class E RF power amplifiers design , 2005, 2005 IEEE VLSI-TSA International Symposium on VLSI Design, Automation and Test, 2005. (VLSI-TSA-DAT)..

[55]  J. Lopez,et al.  Highly Efficient Class E SiGe Power Amplifier Design for Wireless Sensor Network Applications , 2007, 2007 IEEE Bipolar/BiCMOS Circuits and Technology Meeting.

[56]  G. Ulbricht,et al.  EDGE transmitter with commercial GSM power amplifier using polar modulation with memory predistortion , 2005, IEEE MTT-S International Microwave Symposium Digest, 2005..

[57]  F. Svelto,et al.  Analysis of reliability and power efficiency in cascode class-E PAs , 2006, IEEE Journal of Solid-State Circuits.