MEMS acceleration switch with bi-directionally tunable threshold☆

Abstract A MEMS acceleration switch capable of tuning threshold acceleration to either higher or lower levels is designed and implemented with comb drive actuators as a mechanism of threshold tuning. A small sized switch (1.6 × 3.1 × 0.55 mm 3 ) is successfully realized by patterning silicon structures on a glass wafer. The resonant frequency of fabricated switches agrees well with a designed frequency of 1.1 kHz. The threshold acceleration at no tuning voltage is 10.25 g and it is subsequently tuned to 2.0 g and 17.25 g by applying 30 V to pushing comb and pulling comb, respectively. The rising time is measured to be 9.8 ms. Additional functionalities such as safe/armed position convertibility and single use latching switch are also described for diverse applications of the tunable acceleration switches.

[1]  Jung-Mu Kim,et al.  Thermal de-isolation of silicon microstructures in a plasma etching environment , 2013 .

[2]  Farrokh Ayazi,et al.  Micromachined inertial sensors , 1998, Proc. IEEE.

[3]  D. Ciarlo,et al.  A latching accelerometer fabricated by the anisotropic etching of (110) oriented silicon wafers , 1992 .

[4]  Kwanghyun Yoo,et al.  Development and characterization of a novel configurable MEMS inertial switch using a microscale liquid-metal droplet in a microstructured channel , 2011 .

[5]  Haiyan Zhang,et al.  A high sensitivity SOI electric-field sensor with novel comb-shaped microelectrodes , 2011, 2011 16th International Solid-State Sensors, Actuators and Microsystems Conference.

[6]  Jung-Mu Kim,et al.  Design of etch holes to compensate spring width loss for reliable resonant frequencies , 2012 .

[7]  Khalil Najafi,et al.  A wide-range micromachined threshold accelerometer array and interface circuit , 2001 .

[8]  G. Fedder,et al.  Fabrication, characterization, and analysis of a DRIE CMOS-MEMS gyroscope , 2003 .

[9]  Ping Hu,et al.  A Bistable Threshold Accelerometer With Fully Compliant Clamped-Clamped Mechanism , 2010, IEEE Sensors Journal.

[10]  Yun-Ho Jang,et al.  MEMS acceleration switch capable of increasing threshold acceleration , 2012 .

[11]  Wei Ma,et al.  Design and characterization of inertia-activated electrical micro-switches fabricated and packaged using low-temperature photoresist molded metal-electroplating technology , 2003 .

[12]  Yuelin Wang,et al.  Micro-cantilever shocking-acceleration switches with threshold adjusting and 'on'-state latching functions , 2007 .

[13]  Xavier Dollat,et al.  Fabrication, assembly and tests of a MEMS-based safe, arm and fire device , 2010 .

[14]  William C. Tang,et al.  Laterally Driven Polysilicon Resonant Microstructures , 1989 .

[15]  Hong Wang,et al.  Fabrication and characterization of a multidirectional-sensitive contact-enhanced inertial microswitch with a electrophoretic flexible composite fixed electrode , 2012 .

[16]  Satyandra K. Gupta,et al.  Nano-to-millimeter scale integrated systems , 1999 .

[17]  Hong Wang,et al.  Design, simulation and fabrication of a novel contact-enhanced MEMS inertial switch with a movable contact point , 2008 .

[18]  Xuesong Liu,et al.  Design, fabrication and characterization of a latching acceleration switch with multi-contacts independent to the proof-mass , 2011 .

[19]  Jian Zhao,et al.  A Novel Threshold Accelerometer With Postbuckling Structures for Airbag Restraint Systems , 2007, IEEE Sensors Journal.

[20]  R. G. Hamel,et al.  Microminiature ganged threshold accelerometers compatible with integrated circuit technology , 1972 .

[21]  Hong Wang,et al.  Analysis and elimination of the ‘skip contact’ phenomenon in an inertial micro-switch for prolonging its contact time , 2009 .