Knee-simulator testing of conventional and cross-linked polyethylene tibial inserts.

We compared the resistance to delamination and to adhesive/abrasive wear of conventional and highly cross-linked polyethylene tibial inserts of a cruciate-retaining total knee design using a knee simulator. Both groups were tested after aggressive, accelerated aging, and 1 set of conventional inserts was studied without aging. Aging oxidized the conventional, but not the highly cross-linked, inserts. The simulated normal gait testing lasted for 5 and 10 million cycles for the conventional and highly cross-linked inserts, respectively. Aged conventional inserts showed delaminations, whereas none were observed in the unaged conventional and aged cross-linked inserts. Wear rates measured by the gravimetric method were 9 +/- 2 mm3, 10 +/- 4 mm3, and 1 +/- 0 mm3 per million cycles; by the metrologic method, they were 8 +/- 1 mm3, 9 +/- 2 mm3, and 3 +/- 0 mm3 for the unaged conventional, aged conventional, and aged highly crosslinked inserts, respectively. In the test model used, oxidation led to delamination, whereas increased cross-link density resulted in reduced adhesive/abrasive wear of tibial inserts.

[1]  K. Saum,et al.  The Otto Aufranc Award. Impact of gamma sterilization on clinical performance of polyethylene in the hip. , 1995, Clinical orthopaedics and related research.

[2]  C. Bragdon,et al.  The Importance of Multidirectional Motion on the Wear of Polyethylene , 1996, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[3]  W H Harris,et al.  Loci of movement of selected points on the femoral head during normal gait. Three-dimensional computer simulation. , 1996, The Journal of arthroplasty.

[4]  W H Harris,et al.  A novel method of cross-linking ultra-high-molecular-weight polyethylene to improve wear, reduce oxidation, and retain mechanical properties. Recipient of the 1999 HAP Paul Award. , 2001, The Journal of arthroplasty.

[5]  T P Andriacchi,et al.  Studies of human locomotion: past, present and future. , 2000, Journal of biomechanics.

[6]  O. Muratoglu.  A NOVEL METHOD OF CROSSLINKING UHMWPE TO IMPROVE WEAR, REDUCE OXIDATION AND RETAIN MECHANICAL PROPERTIES , 2002 .

[7]  C. Bushe.  Friction and Molecular Structure , 1885, Nature.

[8]  P. Walker,et al.  Wear testing of materials and surfaces for total knee replacement. , 1996, Journal of biomedical materials research.

[9]  W H Harris,et al.  Analysis of the kinematics of different hip simulators used to study wear of candidate materials for the articulation of total hip arthroplasties , 1998, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[10]  A. Wang,et al.  Lubrication and wear of ultra-high molecular weight polyethylene in total joint replacements , 1998 .

[11]  S. Kurtz,et al.  Degradation of mechanical properties of UHMWPE acetabular liners following long-term implantation. , 2003, The Journal of arthroplasty.

[12]  Dc Sun.  Development of an accelerated aging method for evaluation of long-term irradiation effects on UHMWPE implants , 1994 .

[13]  T P Andriacchi,et al.  Methodology for Long-Term Wear Testing of Total Knee Replacements , 2000, Clinical orthopaedics and related research.

[14]  K. Saum,et al.  Impact of gamma sterilization on clinical performance of polyethylene in the knee. , 1996, The Journal of arthroplasty.

[15]  F. Shen,et al.  Development of an extremely wear‐resistant ultra high molecular weight polythylene for total hip replacements , 1999, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[16]  D. Tabor,et al.  Friction and molecular structure: the behaviour of some thermoplastics , 1972, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[17]  W. Harris,et al.  Metrology to Quantify Wear and Creep of Polyethylene Tibial Knee Inserts , 2003, Clinical orthopaedics and related research.

[18]  F. Shen,et al.  Interlaboratory studies to determine optimal analytical methods for measuring the oxidation index of UHMWPE. , 2001, Biomaterials.