Evaluation of the radiometric properties of roofing materials for livestock buildings and their effect on the surface temperature

Passive systems, such as high solar reflective roofing materials, protective facades, vegetative green walls and roofs, can be used in order to control solar heat gain in buildings. These sustainable technologies can reduce the temperature of the external surface of the building envelope, so reducing the energy consumption for cooling in summer. The radiometric properties of metallic roofing materials and their effects on the surface temperature were evaluated. Nine smooth metallic materials used for livestock buildings were tested; 4 were made of aluminium and the other 5 of steel and they were characterised by different colours. Solar reflectivity and long wave infrared emissivity were evaluated by means of laboratory tests; the influence of the radiometric properties on the surface temperature was evaluated in the field by using an experimental structure in Summer. The solar reflectivity coefficient ranged from 7.1% for the brown aluminium to 40.1% for the red steel; significant differences of the temperatures were recorded when the solar radiation hitting the metallic surface was higher than 600 W m −2 . A difference of 13.4% of the solar reflectivity coefficient resulted in a difference of the surface temperature of up to 8 °C. Variation of the slope from 15° to 40° resulted in an increase of the surface temperature of more than 8 °C. The value of the convection coefficient was calculated by means of the data measured in the field, and the mean value was equal to 12.2 W m −2  K −1 .

[1]  Angus Gentle,et al.  Optimized cool roofs: Integrating albedo and thermal emittance with R-value , 2011 .

[2]  E. Mcpherson,et al.  The effects of roof albedo modification on cooling loads of scale model residences in Tucson, Arizona , 1997 .

[3]  J. Carmeliet,et al.  Convective heat transfer coefficients for exterior building surfaces: Existing correlations and CFD modelling , 2011 .

[4]  Giuliano Vox,et al.  Radiometric properties of biodegradable films for horticultural protected cultivation , 2005 .

[5]  Ray D. Jackson,et al.  Thermal radiation from the atmosphere , 1969 .

[6]  David P. Kratz,et al.  Infrared radiation parameterizations in numerical climate models , 1991 .

[7]  Nan Zhang,et al.  A genetic-algorithm-based experimental technique for determining heat transfer coefficient of exterior wall surface , 2004 .

[8]  A. Rosenfeld,et al.  Practical issues for using solar-reflective materials to mitigate urban heat islands , 1998 .

[9]  D. Loveday,et al.  Convective heat transfer coefficients at a plane surface on a full-scale building facade , 1996 .

[10]  Sarah Bretz,et al.  Preliminary survey of the solar reflectance of cool roofing materials , 1997 .

[11]  M. Kindelan,et al.  Dynamic Modeling of Greenhouse Environment , 1980 .

[12]  Carmela Sica,et al.  Experimental tests and technical characteristics of regenerated films from agricultural plastics , 2012 .

[13]  K. Cooper,et al.  A Thermal Balance Model for Livestock Buildings for use in Climate Change Studies , 1998 .

[14]  M. Santamouris,et al.  A study of the thermal performance of reflective coatings for the urban environment , 2006 .

[15]  E. Sparrow.  A new and simpler formulation for radiative angle factors , 1963 .

[16]  André Mermoud,et al.  Infrared sky radiation in Geneva , 1984 .

[17]  M. Pinar Mengüç,et al.  Thermal Radiation Heat Transfer , 2020 .

[18]  L.A Rasmussen,et al.  Estimation of atmospheric transmittance from upper-air humidity , 1998 .

[19]  Demetres Briassoulis,et al.  Review Paper (SE—Structures and Environment): Radiometric and Thermal Properties of, and Testing Methods for, Greenhouse Covering Materials , 2000 .

[20]  R. Prado,et al.  Measurement of albedo and analysis of its influence the surface temperature of building roof materials , 2005 .

[21]  M. Caroprese.  Sheep housing and welfare , 2008 .

[22]  Mathias Cehlin,et al.  Reflective coatings for interior and exterior of buildings and improving thermal performance , 2013 .

[23]  Pietro Picuno,et al.  Innovative Material and Improved Technical Design for a Sustainable Exploitation of Agricultural Plastic Film , 2014 .

[24]  Demetres Briassoulis,et al.  Review, mapping and analysis of the agricultural plastic waste generation and consolidation in Europe , 2013, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[25]  Nil Türkeri,et al.  Assessment of long term solar reflectance performance of roof coverings measured in laboratory and in field , 2012 .

[26]  W. Swinbank.  Long‐wave radiation from clear skies , 1963 .

[27]  V. John,et al.  Estimating thermal performance of cool colored paints , 2010 .

[28]  H. Akbari,et al.  Long-term performance of high-albedo roof coatings , 1997 .

[29]  K.-H. Jeppsson,et al.  SE—Structures and Environment: Solar Heat Load in Uninsulated Livestock Buildings , 2001 .

[30]  M. Santamouris,et al.  Development and testing of PCM doped cool colored coatings to mitigate urban heat island and cool buildings , 2011 .

[31]  Hui Li,et al.  Field measurement of albedo for different land cover materials and effects on thermal performance , 2013 .

[32]  W. Beckman,et al.  Solar Engineering of Thermal Processes , 1985 .

[33]  Douglas John Harris,et al.  Full-scale measurements of convective coefficient on external surface of a low-rise building in sheltered conditions , 2007 .

[34]  N. E. Wijeysundera,et al.  Measurement of the heat transfer coefficient for walls , 1996 .

[35]  J. Monteith,et al.  Principles of Environmental Physics , 2014 .

[36]  J. H. Jo,et al.  An integrated empirical and modeling methodology for analyzing solar reflective roof technologies on commercial buildings , 2010 .

[37]  Michele Zinzi,et al.  Characterization and assessment of cool coloured solar protection devices for Mediterranean residential buildings application , 2012 .

[38]  Aya Hagishima,et al.  Field measurements for estimating the convective heat transfer coefficient at building surfaces , 2003 .