Accessing Chain Length Dependent Termination Rate Coefficients of Methyl Methacrylate (MMA) via the Reversible Addition Fragmentation Chain Transfer (RAFT) Process

The RAFT-CLD-T methodology is demonstrated to be not only applicable to 1-substituted monomers such as styrene and acrylates, but also to 1,1-disubstituted monomers such as MMA. The chain length of the terminating macromolecules is controlled by CPDB in MMA bulk free radical polymerization at 80 degrees C. The evolution of the chain length dependent termination rate coefficient, k(t)(i,i), was constructed in a step-wise fashion, since the MMA/CPDB system displays hybrid behavior (between conventional and living free radical polymerization) resulting in initial high molecular weight polymers formed at low RAFT agent concentrations. The obtained CLD of k(t) in MMA polymerizations is compatible with the composite model for chain length dependent termination. For the initial chain-length regime, up to a degree of polymerization of 100, k(t) decreases with alpha (in the expression k(t)(i,i) = k(t)(0) . i(-alpha)) being close to 0.65 at 80 degrees C. At chain lengths exceeding 100, the decrease is less pronounced (affording an alpha of 0.15 at 80 degrees C). However, the data are best represented by a continuously decreasing nonlinear functionality implying a chain length dependent alpha.

[1]  C. Barner‐Kowollik,et al.  Living free radical polymerization (RAFT) of dodecyl acrylate: Chain length dependent termination, mid-chain radicals and monomer reaction order , 2005 .

[2]  Graeme Moad,et al.  Living radical polymerization by the RAFT process , 2005 .

[3]  Takeshi Fukuda,et al.  Critically evaluated termination rate coefficients for free-radical polymerization: Experimental methods , 2005 .

[4]  Philipp Vana,et al.  Laser Single Pulse Initiated RAFT Polymerization for Assessing Chain-Length Dependent Radical Termination Kinetics† , 2005 .

[5]  C. Barner‐Kowollik,et al.  Access to Chain Length Dependent Termination Rate Coefficients of Methyl Acrylate via Reversible Addition−Fragmentation Chain Transfer Polymerization , 2005 .

[6]  M. Buback,et al.  Termination Kinetics of Dibutyl Itaconate Free‐Radical Polymerization Studied via the SP–PLP–ESR Technique , 2005 .

[7]  Gregory T. Russell,et al.  The effects of chain length dependent propagation and termination on the kinetics of free-radical polymerization at low chain lengths , 2005 .

[8]  M. Coote.  A Quantum-Chemical Approach to Understanding Reversible Addition Fragmentation Chain-Transfer Polymerization , 2004 .

[9]  M. Buback,et al.  Free-Radical Termination Kinetics Studied Using a Novel SP-PLP-ESR Technique , 2004 .

[10]  Liuhe Wei,et al.  Narrowly Distributed Dendronized Polymethacrylates by Reversible Addition-Fragmentation Chain Transfer (RAFT) Polymerization , 2004 .

[11]  C. Barner‐Kowollik,et al.  Facile Access to Chain Length Dependent Termination Rate Coefficients via Reversible Addition-Fragmentation Chain Transfer (RAFT) Polymerization: Influence of the RAFT Agent Structure , 2004 .

[12]  M. Buback,et al.  Chain-Length Dependence of Termination Rate Coefficients in Acrylate and Methacrylate Homopolymerizations Investigated via the SP−PLP Technique , 2004 .

[13]  B. Klumperman,et al.  Application of matrix-assisted laser desorption ionization time-of-flight mass spectrometry in pulsed laser polymerization : chain-length-dependent propagation rate coefficients at high molecular weight : an artifact caused by band broadening in size exclusion chromatography? , 2003 .

[14]  Gregory T. Russell,et al.  Termination in Dilute‐Solution Free‐Radical Polymerization: A Composite Model , 2003 .

[15]  Y. K. Chong,et al.  Thiocarbonylthio Compounds [SC(Ph)S−R] in Free Radical Polymerization with Reversible Addition-Fragmentation Chain Transfer (RAFT Polymerization). Role of the Free-Radical Leaving Group (R) , 2003 .

[16]  C. Barner‐Kowollik,et al.  The Kinetics of Free‐Radical Polymerization , 2003 .

[17]  Robert G. Gilbert,et al.  Critically evaluated termination rate coefficients for free-radical polymerization, 1. The current situation , 2002 .

[18]  Thomas P. Davis,et al.  Kinetic Analysis of Reversible Addition Fragmentation Chain Transfer (RAFT) Polymerizations: Conditions for Inhibition, Retardation, and Optimum Living Polymerization , 2002 .

[19]  C. Barner‐Kowollik,et al.  Easy access to chain-length-dependent termination rate coefficients using RAFT polymerization , 2002 .

[20]  I. D. Jenkins,et al.  Free radical polymerization of styrene: Mass spectrometric identification of the first 15 nitroxide-trapped oligomers and estimated propagation rate coefficients , 2002 .

[21]  G. Zifferer,et al.  New aspects of chain‐length dependent termination , 2002 .

[22]  Philipp Vana,et al.  Chain length dependent propagation rate coefficient kp in pulsed-laser polymerization: Variation with temperature in the bulk polymerization of styrene and methyl methacrylate , 2002 .

[23]  C. Barner‐Kowollik,et al.  Kinetic Investigations of Reversible Addition Fragmentation Chain Transfer Polymerizations: Cumyl Phenyldithioacetate Mediated Homopolymerizations of Styrene and Methyl Methacrylate , 2001 .

[24]  G. Moad,et al.  Mechanism and kinetics of RAFT-based living radical polymerizations of styrene and methyl methacrylate , 2001 .

[25]  M. Buback,et al.  Chain-length dependence of free-radical termination rate deduced from laser single-pulse experiments , 2000 .

[26]  G. Zifferer,et al.  Is the rate constant of chain propagation kp in radical polymerization really chain-length independent ? , 2000 .

[27]  Thomas P. Davis,et al.  Critically evaluated rate coefficients for free‐radical polymerization, 2.. Propagation rate coefficients for methyl methacrylate , 2000 .

[28]  G. Zifferer,et al.  Chain‐length dependent termination in pulsed‐laser polymerization, 7. The evaluation of the power‐law exponent b from the chain‐length distribution in the low frequency (single‐pulse) limit for the reference systems styrene and methyl methacrylate in bulk at 25°C , 1999 .

[29]  Philipp Vana,et al.  Chain‐length dependent termination in pulsed‐laser polymerization, 6. The evaluation of the rate coefficient of bimolecular termination kt for the reference system methyl methacrylate in bulk at 25°C , 1998 .

[30]  B. Klumperman,et al.  A theoretical description of a method for model-independent determination of bimolecular chain-length-dependent free-radical-termination rate coefficients , 1997 .

[31]  J. Torkelson,et al.  A critical experimental examination of the gel effect in free radical polymerization: Do entanglements cause autoacceleration? , 1996 .

[32]  S. D. Ittel,et al.  Dependence of Free-Radical Propagation Rate Constants on the Degree of Polymerization , 1996 .

[33]  Gregory T. Russell,et al.  Initiator efficiencies in 2,2′-azoisobutyronitrile-initiated free-radical polymerizations of styrene , 1994 .

[34]  B. Friedman,et al.  Kinetics of Intermolecular Reactions in Dilute Polymer Solutions and Unentangled Melts , 1993 .

[35]  H. K. Mahabadi.  Effect of chain-length dependence of termination rate constant on the kinetics of free-radical polymerization. 2. Evaluation of an analytical expression for the rate of polymerization , 1991 .

[36]  Hadi Khan Mahabadi,et al.  Effects of chain length dependence of termination rate constant on the kinetics of free-radical polymerization. 1. Evaluation of an analytical expression relating the apparent rate constant of termination to the number-average degree of polymerization , 1985 .

[37]  A. Može,et al.  Study of the isothermal bulk polymerization of methyl methacrylate by differential scanning calorimetry , 1974 .