Steady-state multiplicity in a solid oxide fuel cell: Practical considerations

Abstract Steady-state multiplicity in a solid oxide fuel cell (SOFC) in three modes of operation, constant ohmic external load, potentiostatic and galvanostatic, is studied using a detailed first-principles lumped model. The SOFC model is derived by accounting for heat and mass transfer as well as electrochemical processes taking place inside the fuel cell. Conditions under which the fuel cell exhibits steady state multiplicity are determined. The effects of operating conditions such as convection heat transfer coefficient and inlet fuel and air temperatures and velocities on the steady state multiplicity regions are studied. Depending on the operating conditions, the cell exhibits one or three steady states. For example, it has three steady states: (a) at low external load resistance values in constant ohmic external load operation and (b) at low cell voltage in potentiostatic operation.

[1]  Markus Grötsch,et al.  A two-phase PEMFC model for process control purposes , 2008 .

[2]  Lawrence F. Shampine,et al.  Solving Index-1 DAEs in MATLAB and Simulink , 1999, SIAM Rev..

[3]  D. A. Noren,et al.  Clarifying the Butler–Volmer equation and related approximations for calculating activation losses in solid oxide fuel cell models , 2005 .

[4]  A. Virkar,et al.  Dependence of polarization in anode-supported solid oxide fuel cells on various cell parameters , 2005 .

[5]  S. Kakaç,et al.  A review of numerical modeling of solid oxide fuel cells , 2007 .

[6]  S. Haile.  Materials for Fuel Cells , 2003 .

[7]  Paola Costamagna,et al.  Modeling of Solid Oxide Heat Exchanger Integrated Stacks and Simulation at High Fuel Utilization , 1998 .

[8]  Robert E. Wilson,et al.  Fundamentals of momentum, heat, and mass transfer , 1969 .

[9]  M. Soroush,et al.  Dynamics and Control of a Tubular Solid-Oxide Fuel Cell , 2009 .

[10]  P. Debenedetti,et al.  Steady-state analysis of high temperature fuel cells , 1983 .

[11]  J. Benziger.  Fan the flame with water: Current ignition, front propagation and multiple steady states in polymer electrolyte membrane fuel cells , 2009 .

[12]  Stefano Ubertini,et al.  Modeling Solid Oxide Fuel Cells: Methods, Procedures and Techniques , 2014 .

[13]  S. Campanari,et al.  Definition and sensitivity analysis of a finite volume SOFC model for a tubular cell geometry , 2004 .

[14]  Xin Sun,et al.  The modeling of a standalone solid-oxide fuel cell auxiliary power unit , 2006 .

[15]  S. Chan,et al.  A complete polarization model of a solid oxide fuel cell and its sensitivity to the change of cell component thickness , 2001 .

[16]  Ioannis G. Kevrekidis,et al.  The dynamic response of PEM fuel cells to changes in load , 2005 .

[17]  C. Vayenas,et al.  The role of potential-dependent electrolyte resistance in the performance, steady-state multiplicities and oscillations of PEM fuel cells: Experimental investigation and macroscopic modelling , 2005 .

[18]  Sonia Tulyani,et al.  Steady-state multiplicity in the autohumidification polymer electrolyte membrane fuel cell , 2003 .

[19]  Kai Sundmacher,et al.  Theoretical investigation of steady state multiplicities in solid oxide fuel cells* , 2006 .

[20]  K. B. Oldham,et al.  Fundamentals of electrochemical science , 1993 .

[21]  K. Promislow,et al.  Ignition waves in a stirred PEM fuel cell , 2006 .