Utilization of biomass as an alternative fuel in iron and steel making

[1]  D. Sideris,et al.  Injection of H2-rich carbonaceous materials into the blast furnace: devolatilization, gasification and combustion characteristics and effect of increased H2–H2O on iron ore pellets reducibility , 2020 .

[2]  B. Sundelin,et al.  Reduced Carbon Consumption and CO2 Emission at the Blast Furnace by Use of Briquettes Containing Torrefied Sawdust , 2019, Journal of Sustainable Metallurgy.

[3]  P. Assis,et al.  Combustibility behavior of PCI coals, green petroleum coke and charcoal fines used as fuel for injection into blast furnace tuyeres , 2019, REM - International Engineering Journal.

[4]  Hannu Suopajärvi,et al.  Effect of Charcoal and Kraft-Lignin Addition on Coke Compression Strength and Reactivity , 2017 .

[5]  Mikko Helle,et al.  Feasibility study of woody-biomass use in a steel plant through process integration , 2017 .

[6]  E. Mousa,et al.  Novel approach towards biomass lignin utilization in ironmaking blast furnace , 2017 .

[7]  R. Findorák,et al.  Utilization of charcoal in the iron-ore sintering process , 2016 .

[8]  Herbert Pfeifer,et al.  Increasing the sustainability of steel production in the electric arc furnace by substituting fossil coal with biochar agglomerates , 2016 .

[9]  V. Sahajwalla,et al.  Synthesis of SiC/Si3N4 nanocomposite by using automotive waste tyres as resource , 2015 .

[10]  Anders Hultgren,et al.  Biomass as blast furnace injectant – Considering availability, pretreatment and deployment in the Swedish steel industry , 2015 .

[11]  Maria A. Diez,et al.  Influence of charcoal fines on the thermoplastic properties of coking coals and the optical properties of the semicoke , 2015 .

[12]  Elisângela Martins Leal,et al.  Study of biomass applied to a cogeneration system: A steelmaking industry case , 2015 .

[13]  Tao Jiang,et al.  Characteristics of Prepared Coke–biochar Composite and Its Influence on Reduction of NOx Emission in Iron Ore Sintering , 2015 .

[14]  Tao Jiang,et al.  Application of biomass fuel in iron ore sintering: influencing mechanism and emission reduction , 2015 .

[15]  Dieter Senk,et al.  Iron Ore Sintering Process with Biomass Utilization , 2015 .

[16]  Carmen Barriocanal,et al.  Partial briquetting vs direct addition of biomass in coking blends , 2014 .

[17]  Dieter Senk,et al.  Reduction Behavior of Self‐Reducing Pellet (SRP) for Low Height Blast Furnace , 2014 .

[18]  Cristobal Feliciano-Bruzual,et al.  Charcoal injection in blast furnaces (Bio-PCI): CO2 reduction potential and economic prospects , 2014 .

[19]  Bo Björkman,et al.  Composite Pellets – A Potential Raw Material for Iron‐Making , 2014 .

[20]  Sang Jun Yoon,et al.  Pyrolysis kinetics of coking coal mixed with biomass under non-isothermal and isothermal conditions. , 2014, Bioresource technology.

[21]  Fabrice Patisson,et al.  Using Biomass for Pig Iron Production: A Technical, Environmental and Economical Assessment , 2013, Waste and Biomass Valorization.

[22]  Jun Han,et al.  Characteristics of Coal and Pine Sawdust Co-carbonization , 2014 .

[23]  Ramon Alvarez,et al.  Influence of biomass on metallurgical coke quality , 2014 .

[24]  A. Babich,et al.  Reduction Kinetics of Self-Reducing Pellets of Iron Ore , 2014 .

[25]  Anders Hultgren,et al.  Injection of solid biomass products into the blast furnace and its potential effects on an integrated steel plant , 2014 .

[26]  John A. Mathews,et al.  BIO-PCI, charcoal injection in blast furnaces: State of the art and economic perspectives , 2013 .

[27]  Jun-ichiro Yagi,et al.  Analysis of the combined injection of pulverized coal and charcoal into large blast furnaces , 2013 .

[28]  Takazo Kawaguchi,et al.  Utilization of Biomass for Iron Ore Sintering , 2013 .

[29]  John G Mathieson,et al.  Substitution of Charcoal for Coke Breeze in Iron Ore Sintering , 2013 .

[30]  Eva Pongrácz,et al.  The potential of using biomass-based reducing agents in the blast furnace: A review of thermochemical conversion technologies and assessments related to sustainability , 2013 .

[31]  J. Legemza.  THERMODYNAMIC STUDY OF UTILIZATION OF CHARCOAL IN THE IRON-ORE SINTERING PROCESS , 2013 .

[32]  Ramon Alvarez,et al.  Effect of the addition of waste sawdust on thermoplastic properties of a coal , 2013 .

[33]  Ryo Yoshiie,et al.  Reaction behavior during heating biomass materials and iron oxide composites , 2013 .

[34]  Jae Goo Lee,et al.  Carbonization Characteristics of Biomass/Coal Blend For Bio-Coke , 2013 .

[35]  Tao Jiang,et al.  Reduction of Pollutant Emission in Iron Ore Sintering Process by Applying Biomass Fuels , 2012 .

[36]  John G Mathieson,et al.  Reducing net CO2 emissions using charcoal as a blast furnace tuyere injectant , 2012 .

[37]  Nawshad Haque,et al.  Biomass as a Source of Renewable Carbon for Iron and Steelmaking , 2012 .

[38]  Magdalena Zaharia,et al.  Recycling Agricultural Waste from Palm Shells during Electric Arc Furnace Steelmaking , 2012 .

[39]  Ka Wing Ng,et al.  Incorporation of Charcoal in Coking Coal Blend – A Study of the Effects on Carbonization Conditions and Coke Quality , 2012 .

[40]  P Cavaliere,et al.  Reducing emissions of PCDD/F in sintering plant: numerical and experimental analysis , 2011 .

[41]  Ka Wing Ng,et al.  Reactivity of bio-coke with CO2 , 2011 .

[42]  Dieter Senk,et al.  Charcoal Behaviour by Its Injection into the Modern Blast Furnace , 2010 .

[43]  Tatsuro Ariyama,et al.  Reaction Model and Reduction Behavior of Carbon Iron Ore Composite in Blast Furnace , 2009 .

[44]  Terry Norgate,et al.  Environmental and Economic Aspects of Charcoal Use in Steelmaking , 2009 .

[45]  Tetsuya Nagasaka,et al.  Carbonization Behaviour of Woody Biomass and Resulting Metallurgical Coke Properties , 2008 .

[46]  Dieter Senk,et al.  Dust Injection in Iron and Steel Metallurgy , 2006 .

[47]  Ram Pravesh Bhagat,et al.  Porosity of Sinter and its relation with the sintering indices , 2006 .

[48]  Vladimir Strezov,et al.  Iron ore reduction using sawdust: Experimental analysis and kinetic modelling , 2006 .

[49]  Seiji Nomura,et al.  The effect of plastic size on coke quality and coking pressure in the co-carbonization of coal/plastic in coke oven , 2006 .

[50]  Shinroku Matsuzaki,et al.  Improvement in Blast Furnace Reaction Efficiency Through the Use of Catalyst-doped Highly Reactive Coke , 2006 .

[51]  K. Nakano,et al.  Subjects for Achievement of Blast Furnace Operation with Low Reducing Agent Rate , 2006 .

[52]  V. Sahajwalla,et al.  Degradation Behaviour of a High CSR Coke in an Experimental Blast Furnace: Effect of Carbon Structure and Alkali Reactions , 2005 .

[53]  Michitaka Sato,et al.  Reduction of CO2 Emissions from Integrated Steel Works and Its Subjects for a Future Study , 2005 .

[54]  Akito Kasai,et al.  Lowering of Thermal Reserve Zone Temperature in Blast Furnace by Adjoining Carbonaceous Material and Iron Ore , 2004 .

[55]  K. Higuchi,et al.  Influence of sintering conditions on the reduction behaviour of pure hematite compacts , 2003 .

[56]  Ramon Alvarez,et al.  Coal for metallurgical coke production: predictions of coke quality and future requirements for cokemaking , 2002 .

[57]  Eiki Kasai,et al.  Effect of Additives on the Dioxins Emissions in the Iron Ore Sintering Process , 2001 .

[58]  Heribert Bertling,et al.  Coal and Coke for Blast Furnaces , 1999 .

[59]  Itaya Hiroshi,et al.  Formation of pores in iron ore sinter. , 1986 .