The Current Status of Theoretically Based Approaches to the Prediction of the Critical Heat Flux in Flow Boiling

The phenomena governing the critical heat flux (CHF) in flow boiling in ducts and rod bundles vary with the flow pattern. Separate models are needed for dryout in annular flow, wall overheating in ...

[1]  J. Clark,et al.  Bubble Boundary Layer and Temperature Profiles for Forced Convection Boiling in Channel Flow , 1964 .

[2]  A. Serizawa.  Theoretical prediction of maximum heat flux in power transients , 1983 .

[3]  J. Weisman,et al.  A phenomenological model of subcooled flow boiling in the detached bubble region , 1990 .

[4]  W. Hebel,et al.  A contribution to the hydrodynamics of boiling crisis in a forced flow of water , 1981 .

[5]  Y. Katto.  Prediction of critical heat flux of subcooled flow boiling in round tubes , 1990 .

[6]  J. Weisman,et al.  Prediction of critical heat flux in flow boiling at low qualities , 1983 .

[7]  J. Weisman,et al.  A phenomenologically based prediction of the critical heat flux in channels containing an unheated wall , 1990 .

[8]  Y. Sudo,et al.  A CHF characteristic for downward flow in a narrow vertical rectangular channel heated from both sides , 1989 .

[9]  H. S. Isbin,et al.  A MODEL FOR CORRELATING TWO-PHASE, STEAM-WATER, BURNOUT HEAT-TRANSFER FLUXES , 1961 .

[10]  Satoru Sugawara,et al.  Droplet deposition and entrainment modeling based on the three-fluid model , 1990 .

[11]  P. B. Whalley,et al.  The calculation of dryout in a rod bundle , 1977 .

[12]  Y. L. Wong,et al.  Chf prediction for horizontal tubes , 1990 .

[13]  V. Kefer,et al.  Critical heat flux (CHF) and post-CHF heat transfer in horizontal and inclined evaoprator tubes , 1989 .

[14]  Y. Miyamoto,et al.  FIDAS: Detailed subchannel analysis code based on the three-fluid and three-field model , 1990 .

[15]  Akira Inoue,et al.  Subchannel analysis of a critical power test, using simulated BWR S × S fuel assembly , 1990 .

[16]  P. Griffith,et al.  Thermal and Hydrodynamic Phenomena in a Horizontal, Uniformly Heated Steam-Generating Pipe , 1987 .

[17]  Soon-Heung Chang,et al.  A critical heat flux model based on mass, energy, and momentum balance for upflow boiling at low qualities , 1989 .

[18]  J. Weisman,et al.  Prediction of the critical heat flux in flow boiling at intermediate qualities , 1986 .

[19]  C. Lee,et al.  A mechanistic critical heat flux model for subcooled flow boiling based on local bulk flow conditions , 1988 .

[20]  Bau-Shei Pei,et al.  A Theoretical Critical Heat Flux Model for Rod Bundles Under Pressurized Water Reactor Conditions , 1989 .

[21]  J. Weisman,et al.  A phenomenologically based prediction of rod-bundle dryout , 1988 .

[22]  P. Whalley.  The calculation of dryout in a rod bundle—a comparison of experimental and calculated results , 1978 .

[23]  Y. Katto.  A physical approach to critical heat flux of subcooled flow boiling in round tubes , 1990 .

[24]  J. Weisman,et al.  Effects of fluid properties and pipe diameter on two-phase flow patterns in horizontal lines , 1979 .

[25]  F. J. Moody,et al.  The thermal hydraulics of a boiling water nuclear reactor , 1977 .

[26]  Isao Kataoka,et al.  Turbulence suppression in bubbly two-phase flow , 1990 .

[27]  E. D. Hughes,et al.  Multi-fluid modeling of annular two-phase flow☆ , 1978 .

[28]  Y. Katto,et al.  A new hydrodynamic model of critical heat flux, applicable widely to both pool and forced convection boiling on submerged bodies in saturated liquids , 1983 .

[30]  G. Hewitt,et al.  Annular two-phase flow , 1970 .

[31]  Bau-Shei Pei,et al.  An Improved Theoretical Critical Heat Flux Model for Low-Quality Flow , 1989 .

[32]  Joel Weisman,et al.  A theoretically based critical heat flux prediction for rod bundles at PWR conditions , 1985 .

[33]  P. Griffith,et al.  Circumferential wall temperature variations in horizontal boiler tubes , 1983 .

[34]  J. Weisman,et al.  A phenomenological model for prediction of critical heat flux under highly subcooled conditions , 1988 .

[35]  G. Wallis.  Annular Two-Phase Flow—Part 2: Additional Effects , 1970 .

[36]  Kaichiro Mishima,et al.  The effect of flow direction and magnitude on CHF for low pressure water in thin rectangular channels , 1985 .