Study of carbon films from PAN/VGCF composites by gelation/crystallization from solution

A carbon film with a cross-sectional area much larger than that of a commercial carbon fiber (>6000 times) and a thickness of about 0.3 mm was obtained using a new method. In this method, composite materials of polyacrylonitrile (PAN) and vapor-grown carbon fiber (VGCF) prepared by gelation/crystallization from dilute solutions were used as starting materials The gelation/crystallization method was adopted to ensure high orientation of PAN chains. The composite materials were heat-treated at 200–300°C in an oxidizing atmosphere for thermal stabilization and then heat-treated to 1500°C in argon gas to promote carbonization. The tensile modulus and electric conductivity for the carbon materials with cross-sectional areas of about 0.6 mm2 (thickness 0.3 mm and width 2 mm) reached 18 GPa and 10 Ω−1 cm−1, respectively. The mechanical and electrical properties of the final carbonized materials were sensitive to the PAN/VGCF composition and the draw ratio. These phenomena were analyzed using Fourier transform IR and X-ray diffraction.

[1]  R. Mathur,et al.  IR studies of PAN fibres thermally stabilized at elevated temperatures , 1994 .

[2]  Robert A. Meyers,et al.  Encyclopedia of physical science and technology , 1987 .

[3]  M. Matsuo,et al.  Ultradrawing at room temperature of high molecular weight polyethylene. 3. Theoretical analysis of SAXS patterns of unannealed and annealed samples , 1983 .

[4]  M. Matsuo,et al.  Ultradrawing at room temperature of high molecular weight polyethylene , 1982 .

[5]  Rakesh B. Mathur,et al.  A new approach to thermal stabilisation of PAN fibres , 1992 .

[6]  M. Matsuo,et al.  Crosslinking of ultrahigh-molecular weight polyethylene films produced by gelation/crystallization from solution under elongation process , 1986 .

[7]  A. Gupta,et al.  Acrylic Precursors for Carbon Fibers , 1991 .

[8]  M. Matsuo,et al.  Molecular Weight Dependence on the Morphological Properties of Polyethylene Gels , 1986 .

[9]  F. Happey.  Applied fibre science , 1978 .

[10]  Ian R. Harrison,et al.  New aspects in the oxidative stabilization of PAN-based carbon fibers: II , 1996 .

[11]  G. Xue,et al.  Surface-enhanced Raman scattering study of polymer on metal. 2. Molecular chain orientation of polybenzimidazole and poly(L-histidine) and its transition , 1991 .

[12]  R. Mathur,et al.  Post spinning modification of PAN fibres — a review , 1997 .

[13]  P. Bajaj,et al.  Effect of an acidic comonomer on thermooxidative stabilization of polyacrylonitrile , 1995 .

[14]  Y. Bin,et al.  Morphology and electrical conductivity of ultrahigh-molecular-weight polyethylene–low-molecular-weight polyethylene–carbon black composites prepared by gelation /crystallization from solutions , 1999 .