Measurements and Prediction of the Effects of Surface Roughness on Profile Losses and Deviation in a Turbine Cascade

Measurements of pressure distributions, profile losses, and flow deviation were carried out on a planar turbine cascade in incompressible flow to assess the effects of partial roughness coverage of the blade surfaces. Spanwise-oriented bands of roughness were placed at various locations on the suction and pressure surfaces of the blades. Roughness height, spacing between roughness elements, and band width were varied. A computational method based on the inviscid/viscous interaction approach was also developed; its predictions were in good agreement with the experimental results. This indicates that good predictions can be expected for a variety of cascade and roughness configurations from any two-dimensional analysis that couples an inviscid method with a suitable rough surface boundary-layer analysis. The work also suggests that incorporation of the rough wall skin-friction law into a three-dimensional Navier-Stokes code would enable good predictions of roughness effects in three-dimensional situations. Roughness was found to have little effect on static pressure distribution around the blades and on deviation angle, provided that it does not precipitate substantial flow separation. Roughness on the suction surface can cause large increases in profile losses; roughness height and location of the leading edge of the roughness band are particularly important. Loss increments due tomore » pressure-surface roughness are much smaller than those due to similar roughness on the suction surface.« less