论文信息 - Residence time distributions and basic studies of flow and melting in a modular Buss Kneader

Residence time distributions and basic studies of flow and melting in a modular Buss Kneader

Experimental studies of residence time distribution, fill factor, temperature, and melting profiles of thermoplastic resins are presented. Residence time distributions were determined as a function of throughput and screw speed. The melting of polypropylene and low density polyethylene in the entrance region was investigated. Fill factor and temperature profiles are reported.

Min-Young Lyu | James L. White | James L White | M. Lyu

[1] J. White,et al. Models of Flow and Experimental Studies on a Modular List/Buss Kokneter , 1995 .

[2] J. White,et al. Simulation of Non-isothermal Flow in Twin Screw Extrusion , 1994 .

[3] K. Stade,et al. Techniques for compounding glass fiber-reinforced thermoplastics , 1977 .

[4] James L White,et al. Simulation of non‐isothermal flow in modular co‐rotating twin screw extrusion , 1994 .

[5] Han E. H. Meijer,et al. On the modeling of continuous mixers. Part II: The cokneader , 1990 .

[6] J. White,et al. Thermal/Peroxide Induced Degradation and Maleation of Polypropylene by Reactive Extrusion , 1995 .

[7] James L White,et al. Simulation of linear viscoelastic flow behavior in the Buss Kneader , 1997 .

[8] J. White,et al. Simulation of Non-Isothermal Flow in a Modular Buss Kneader and Comparison with Experiment , 1997 .

[9] James L White,et al. Continuous polymerization of caprolactam in a modular intermeshing corotating twin screw extruder integrated with continuous melt spinning of polyamide 6 fiber: Influence of screw design and process conditions , 1994 .

[10] J. White,et al. Modelling of a Viscous Non-Newtonian Polymer Melt in a List/Buss Kneader and Comparison to Experiment , 1996 .

[11] J. White,et al. Flow Visualization and Residence Time Distributions in a Modular Co-rotating Twin Screw Extruder , 1994 .