Experimental Study of a Combined-Cycle Engine Combustor in Ejector-Jet Mode

*† ‡ § § A combustor model of a rocket-ramjet combined-cycle engine was tested in an ejector-jet mode under a sea-level, still condition. The model had two rockets in the duct. Propellants were gaseous hydrogen and oxygen. Design factors of the combustor were cross sections at the entrance and the exit, length of the combustor, fuel injection position and rocket operating conditions. In the tests, the designed operation of the ejector-jet was successfully attained. That is, breathed air was choked at the throat section. Supersonic rocket exhaust and air were decelerated in the divergent duct with an increase of the wall pressure. Fuel was injected in the downstream straight section and combustion gas choked at the exit. Mean Mach number was unity, and mean combustion efficiency was 0.8 according to pitot pressure measurement and gas sampling. Thrust augmentation was confirmed with the measurements. Operating conditions predicted in the design process reasonably agreed with those in the experiment. Other design factors were also investigated. Suction performance was increased with increase of a mixture ratio of the rockets. Acceleration of the breathed air was affected by length of the upstream straight section. The combustion status was not affected by length of downstream straight section or position of fuel injection. Fuel increase caused an increase of the pressure until a stoicheometric condition.

[1]  Sadatake Tomioka,et al.  Design of Sub-Scale Rocket-Ramjet Combined Cycle Engine Model , 2005 .

[2]  Kouichiro Tani,et al.  Conceptual Study of a Rocket-Ramjet Combined-Cycle Engine for an Aerospace Plane , 2007 .

[3]  Sadatake Tomioka,et al.  Analyses and Application of Gas Sampling to Scramjet Engine Testing , 1999 .

[4]  William Escher,et al.  A user's primer for comparative assessments of all-rocket and rocket-based combined-cycle propulsion systems for advanced Earth-to-orbit space transport applications , 1995 .

[5]  Takeshi Kanda,et al.  Downstream Ramjet-Mode Combustion in a Dual-Mode Scramjet Engine , 2006 .

[6]  R. H. Korkegi,et al.  Comparison of Shock-Induced Two- and Three- Dimensional Incipient Turbulent Seperation , 1975 .

[7]  Thomas M. Krivanek,et al.  Design and Fabrication of the ISTAR Direct-Connect Combustor Experiment at the NASA Hypersonic Tunnel Facility , 2005 .

[8]  R. H. Schmucker.  Status of flow separation prediction in liquid propellant rocket nozzles , 1974 .

[9]  Goro Masuya,et al.  Aerodynamic Experiment on an Ejector-Jet , 2005 .

[10]  K. Kudo,et al.  Experimental Study of Downstream Combustion Ramjet-Mode , 2005 .

[11]  Takeshi Kanda,et al.  Experimental Study of Combined Cycle Engine Combustor in Scramjet-Mode , 2005 .

[12]  Takeshi Kanda,et al.  Momentum Balance Model of Flow Field with Pseudo-Shock , 2005 .

[13]  Takeshi Kanda,et al.  DUAL-MODE OPERATION IN A SCRAMJET COMBUSTOR , 2001 .

[14]  Takeshi Kanda,et al.  Aerodynamic Characteristics of the Combined Cycle Engine in an Ejector Jet Mode , 2005 .

[15]  John R. Olds,et al.  SCCREAM: A Conceptual Rocket-Based Combined-Cycle Engine Performance Analysis Tool , 2001 .

[16]  Takeshi Kanda,et al.  Conceptual Study of a Combined-Cycle Engine for an Aerospace Plane , 2003 .

[17]  Takeshi Kanda,et al.  Aerodynamic Characteristics of the Modified Combined Cycle Engines in Ejector-Jet Mode , 2006 .

[18]  Takeshi Kanda,et al.  Dual-Mode Operations in a Scramjet Combustor , 2004 .

[20]  Takeshi Kanda,et al.  Scramjet Mode Tests of a Combined Cycle Engine Combustor , 2003 .