Preparation of hemoglobin imprinted polymers based on graphene and protein removal assisted by electric potential

Hemoglobin (Hb) imprinted polymers based on graphene were prepared on the surface of a Au electrode and protein removal assisted by electric potential was studied in detail. Firstly, the electrode modified with MIP (MIP/AuE) was examined by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and scanning electron microscope (SEM). Then the electric potential and applying time were carefully investigated. The results of experiments showed that applying an electric potential could improve the efficiency of protein removal and greatly shorten the removal time. Applying +600 mV (vs. SCE) for 60 min was the optimized route for Hb removal in our study. Finally, the MIP/AuE prepared using the optimal conditions was used as a biosensor and successfully applied for the determination of Hb by differential pulse voltammetric (DPV) measurements. The proposed biosensor exhibited a broader linear range and a lower detection limit when it was compared to those Hb sensors based on MIP. The linear range was from 1.0 × 10−8 to 1.0 × 10−2 mg L−1 with a detection limit of 6.7 × 10−9 mg L−1 (S/N = 3). In a word, the work of this paper established a useful way for preparation and template removal based on protein imprinted polymers.

[1]  Feng Yu,et al.  Novel electrochemical sensing platform based on a molecularly imprinted polymer decorated 3D nanoporous nickel skeleton for ultrasensitive and selective determination of metronidazole. , 2015, ACS applied materials & interfaces.

[2]  Karsten Haupt,et al.  A molecularly imprinted polymer-based evanescent wave fiber optic sensor for the detection of basic red 9 dye , 2015 .

[3]  H. Salavagione,et al.  Chemical sensors based on polymer composites with carbon nanotubes and graphene: the role of the polymer , 2014 .

[4]  Yukui Zhang,et al.  Molecularly imprinted macroporous monolithic materials for protein recognition , 2011 .

[5]  S. Beyazıt,et al.  Initiator-free synthesis of molecularly imprinted polymers by polymerization of self-initiated monomers , 2015 .

[6]  Yue Sun,et al.  Preparation of hemoglobin (Hb) imprinted polymer by Hb catalyzed eATRP and its application in biosensor. , 2016, Biosensors & bioelectronics.

[7]  Lei Tan,et al.  Selective room temperature phosphorescence sensing of target protein using Mn-doped ZnS QDs-embedded molecularly imprinted polymer. , 2013, Biosensors & bioelectronics.

[8]  Qiuming Gao,et al.  Hemoglobin niobate composite based biosensor for efficient determination of hydrogen peroxide in a broad pH range. , 2007, Biosensors & bioelectronics.

[9]  N. Gu,et al.  Electric potential control of DNA immobilization on gold electrode. , 2003, Biosensors & bioelectronics.

[10]  Xiwen He,et al.  Magnetic glass carbon electrode, modified with magnetic ferriferrous oxide nanoparticles coated with molecularly imprinted polymer films for electrochemical determination of bovine hemoglobin , 2014 .

[11]  Wanguo Hou,et al.  Hemoglobin immobilized in exfoliated Co2Al LDH-graphene nanocomposite film: Direct electrochemistry and electrocatalysis toward trichloroacetic acid , 2016 .

[12]  A. B. Fuertes,et al.  Synthesis of colloidal silica nanoparticles of a tunable mesopore size and their application to the adsorption of biomolecules. , 2010, Journal of colloid and interface science.

[13]  V. K. Rao,et al.  Immobilization of acetylcholineesterase-choline oxidase on a gold-platinum bimetallic nanoparticles modified glassy carbon electrode for the sensitive detection of organophosphate pesticides, carbamates and nerve agents. , 2009, Biosensors & bioelectronics.

[14]  Xiaojing Lu,et al.  Surface molecularly imprinted polymers-based electrochemical sensor for bovine hemoglobin recognition. , 2012, The Analyst.

[15]  Chih-Kung Lee,et al.  A novel, electrically protein-manipulated microcantilever biosensor for enhancement of capture antibody immobilization , 2009 .

[16]  Abbasali Zamani,et al.  Molecular imprinting method for fabricating novel glucose sensor: polyvinyl acetate electrode reinforced by MnO2/CuO loaded on graphene oxide nanoparticles. , 2016, Food chemistry.

[17]  Yang Wang,et al.  Molecularly imprinted polymer thin film based surface plasmon resonance sensor to detect hemoglobin , 2014, Chemical Research in Chinese Universities.

[18]  Jing Luo,et al.  Electrochemical sensor for bovine hemoglobin based on a novel graphene-molecular imprinted polymers composite as recognition element , 2014 .

[19]  Haofeng Yu,et al.  Bovine serum albumin-imprinted polymer gels prepared by graft copolymerization of acrylamide on chitosan , 2007 .

[20]  T. Guo,et al.  Adsorptive separation of hemoglobin by molecularly imprinted chitosan beads. , 2004, Biomaterials.

[21]  Syed Mazhar Shah,et al.  Flow-injection chemiluminescence determination of haemoglobin in the blood. , 2013, Luminescence : the journal of biological and chemical luminescence.

[22]  T. Guo,et al.  Chitosan beads as molecularly imprinted polymer matrix for selective separation of proteins. , 2005, Biomaterials.

[23]  Zhiping Zhou,et al.  A novel molecularly imprinted polymer thin film at surface of ZnO nanorods for selective fluorescence detection of para-nitrophenol , 2015 .

[24]  Huimin Duan,et al.  Bioreceptor multi-walled carbon nanotubes@Fe3O4@SiO2–surface molecular imprinted polymer in an ultrasensitive chemiluminescent biosensor for bovine hemoglobin , 2015 .

[25]  Z. Altintas,et al.  Detection of Waterborne Viruses Using High Affinity Molecularly Imprinted Polymers. , 2015, Analytical chemistry.

[26]  P. Kanatharana,et al.  A novel molecularly imprinted chitosan-acrylamide, graphene, ferrocene composite cryogel biosensor used to detect microalbumin. , 2014, The Analyst.

[27]  Wang Lu-min,et al.  A carbon dots based fluorescent probe for selective and sensitive detection of hemoglobin , 2015 .

[28]  N. Pourreza,et al.  Hemoglobin detection using curcumin nanoparticles as a colorimetric chemosensor , 2015 .

[29]  C. Gong,et al.  Photocontrolled solid-phase extraction of guanine from complex samples using a novel photoresponsive molecularly imprinted polymer. , 2015, Food chemistry.

[30]  M. Zhang,et al.  The preparation of magnetic molecularly imprinted nanoparticles for the recognition of bovine hemoglobin. , 2014, Talanta.

[31]  E. Bahadır,et al.  Applications of graphene in electrochemical sensing and biosensing , 2016 .

[32]  Xuexia Liu,et al.  An electrochemical sensor for dopamine based on poly(o-phenylenediamine) functionalized with electrochemically reduced graphene oxide , 2014 .

[33]  Sai Bi,et al.  An ionic liquid-modified graphene based molecular imprinting electrochemical sensor for sensitive detection of bovine hemoglobin. , 2014, Biosensors & bioelectronics.

[34]  P. Kanatharana,et al.  A highly stable oxygen-independent glucose biosensor based on a chitosan-albumin cryogel incorporated with carbon nanotubes and ferrocene , 2013 .

[35]  Giovanna Marrazza,et al.  Quasi-monodimensional polyaniline nanostructures for enhanced molecularly imprinted polymer-based sensing. , 2010, Biosensors & bioelectronics.

[36]  N. Gu,et al.  Potential control of horseradish peroxidase immobilization on gold electrode , 2004 .

[37]  Xiwen He,et al.  Novel hybrid structure silica/CdTe/molecularly imprinted polymer: synthesis, specific recognition, and quantitative fluorescence detection of bovine hemoglobin. , 2013, ACS applied materials & interfaces.

[38]  Jing Luo,et al.  Molecularly imprinted photo-sensitive polyglutamic acid nanoparticles for electrochemical sensing of hemoglobin , 2014, Microchimica Acta.