Ultrahigh strength hot rolled microalloyed steel: Microstructure and properties

Abstract A low carbon steel alloyed with Ni, Mn, Mo, Cu and microalloyed with Nb and Ti was prepared. Continuous cooling transformation behaviour of the steel was evaluated. Formation of polygonal or Widmanstätten ferrite is suppressed at high temperature and the 'C' curve is shifted to an extreme right. At lower temperatures a flat top 'C' curve with a mixed structure of bainite and martensite was obtained and the transformation temperatures do not vary much with a wide range of cooling rates. The steel was thermomechanically processed at different finishing temperatures and ultrahigh strength values were obtained as a result of austenite grain refinement, highly dislocated fine lath martensite structure along with tiny precipitates of microalloying carbide and carbonitride at all finish rolling temperatures. The stable and large TiN/TiCN particles formed during casting have impaired the impact toughness values at ambient and at −40°C temperatures.

[1]  B. Mishra,et al.  Influence of thermo-mechanical processing and different post-cooling techniques on structure and properties of an ultra low carbon Cu bearing HSLA forging , 2003 .

[2]  B. Bai,et al.  The Properties of 1 500 MPa Grade Alloy Steel with Carbide Free Bainite/Martensite Mixed Microstructures , 2003 .

[3]  C. Park,et al.  Carbide precipitation and high-temperature strength of hot-rolled high-strength, low-alloy steels containing Nb and Mo , 2002 .

[4]  D. Ivey,et al.  Precipitation Behaviour of a Grade 100 Structural Steel , 2002 .

[5]  A. Koursaris,et al.  Precipitation and hot ductility of low C-V and low C-V-Nb microalloyed steels during thin slab casting , 2001 .

[6]  R.D.K. Misra,et al.  Ultrahigh strength hot rolled microalloyed steels: microstructural aspects of development , 2001 .

[7]  P. Brown,et al.  Design of novel high strength bainitic steels: Part 2 , 2001 .

[8]  L. Zhang,et al.  Dependency of fracture toughness on the inhomogeneity of coarse TiN particle distribution in a low alloy steel , 2001 .

[9]  Y. Tomita.  Development of fracture toughness of ultrahigh strength, medium carbon, low alloy steels for aerospace applications , 2000 .

[10]  P. Valles,et al.  Influence of Ti and N Contents on Austenite Grain Control and Precipitate Size in Structural Steels , 1999 .

[11]  M. Mujahid,et al.  HSLA-100 steels: Influence of aging heat treatment on microstructure and properties , 1998 .

[12]  G. Krauss,et al.  Deformation, fracture, and mechanical properties of low-temperature-tempered martensite in SAE 43xx steels , 1997 .

[13]  S. Subramanian,et al.  Precipitation behavior in a medium carbon, ti-v-n microalloyed steel , 1996 .

[14]  D. Dunne,et al.  Age Hardening in a Cu-bearing High Strength Low Alloy Steel , 1996 .

[15]  A. DeArdo.  Multi-phase Microstructures and Their Properties in High Strength Low Carbon Steels , 1995 .

[16]  J. J. Urcola,et al.  Influence of the microstructure on the fracture toughness and fracture mechanisms of forging steels microalloyed with titanium with ferrite-pearlite structures , 1993 .

[17]  C. M. Sellars,et al.  Mechanism and kinetics of strain induced precipitation of Nb(C,N) in austenite , 1992 .

[18]  S. W. Thompson,et al.  Continuous cooling transformations and microstructures in a low-carbon, high-strength low-alloy plate steel , 1990 .

[19]  M. Loretto,et al.  Nature of large precipitates in titanium-containing HSLA steels , 1987 .

[20]  G. Thomas,et al.  Effect of finish rolling temperature on the structure and properties of directly quenched nb containing low carbon steel , 1985 .

[21]  John J. Jonas,et al.  Effect of molybdenum, niobium, and vanadium on static recovery and recrystallization and on solute strengthening in microalloyed steels , 1983 .

[22]  J. B. Sande,et al.  Niobium carbonitride precipitation and austenite recrystallization in hot-rolled microalloyed steels , 1980 .