A 1/3" format image sensor with refractory metal light shield for color video applications

The authors report results obtained on a full-color interline transfer CCD (charged-coupled device) image sensor with pixel dimensions of 8.6 mu m(H)*6.8 mu m(V) using 1.2- mu m design rules and a two-phase, single-polysilicon-per-phase technology. In order to reduce image smear and to provide suitable topography for integral color filters, a refractory light shield with a flowed glass overlayer was incorporated. The basic sensor and pixel architecture is shown. Image smear as a percent of full well, measured with 10% vertical illumination at saturated intensity, is shown as a function of wavelength. Smear is lowest at short wavelengths but is at an acceptable level for applications with controlled illumination.<<ETX>>

[1]  Y. Endo,et al.  A 2-million Pixel Ccd Imager Overlaid With An Amorphous Silicon Photoconversion Layer , 1988, 1988 IEEE International Solid-State Circuits Conference, 1988 ISSCC. Digest of Technical Papers.

[2]  D.N. Nichols,et al.  A 1.4 million element, full frame CCD image sensor with vertical overflow drain for anti-blooming and low color crosstalk , 1987, 1987 International Electron Devices Meeting.

[3]  Y. Ishihara,et al.  Smear reduction in the interline CCD image sensor , 1987, IEEE Transactions on Electron Devices.

[4]  Eric G. Stevens,et al.  A 1.4-million-element CCD image sensor , 1987, 1987 IEEE International Solid-State Circuits Conference. Digest of Technical Papers.