A global thermo-mechanical model to mitigate welding residual stress and deformation in production of an aluminum bio-inspired AUV with a curved outside corner joint

[1]  T. Yasuki,et al.  Measurement and analysis of welding deformation and residual stress in CMT welded lap joints of 1180 MPa steel sheets , 2021, Journal of Manufacturing Processes.

[2]  P. Biswas,et al.  Finite element analysis of in- process thermal mitigation of welding induced residual stresses in 9Cr-1Mo-V steel butt joint considering phase transformation , 2021, Journal of Manufacturing Processes.

[3]  J. Jelovica,et al.  Buckling and free vibration of laser-welded web-core sandwich panels: Extreme sensitivity to variation of weld rotational stiffness , 2021 .

[4]  Ping Wang,et al.  Characteristics of welding distortion and residual stresses in thin-walled pipes by solid-shell hybrid modelling and experimental verification , 2021 .

[5]  Masahiko Fujikubo,et al.  The ISSC 2022 committee III.1-Ultimate strength benchmark study on the ultimate limit state analysis of a stiffened plate structure subjected to uniaxial compressive loads , 2021 .

[6]  Cheng Yan,et al.  Experimental and numerical investigation on ultimate strength of laser-welded stiffened plates considering welding deformation and residual stresses , 2021, Ocean Engineering.

[7]  S. Bag,et al.  Development of avocado shape heat source model for finite element based heat transfer analysis of high-velocity arc welding process , 2021 .

[8]  F. Morel,et al.  A two-scale finite element model for the fatigue design of large welded structures , 2021 .

[9]  Pengfei Liu,et al.  A new phenomenon in interference effect on catamaran dynamic response , 2021 .

[10]  S. Weiss,et al.  Thermomechanical laser welding simulation of dissimilar steel-aluminum overlap joints , 2021 .

[11]  Carlos Soares,et al.  Strain-based fatigue reliability assessment of welded joints in ship structures , 2021 .

[12]  R. M. Farias,et al.  An efficient computational approach for heat source optimization in numerical simulations of arc welding processes , 2021, Journal of Constructional Steel Research.

[13]  Carlos Soares,et al.  Experimental and numerical investigation on welding simulation of long stiffened steel plate specimen , 2021 .

[14]  Jae-Woong Kim,et al.  Numerical prediction of deformation in thin-plate welded joints using equivalent thermal strain method , 2020 .

[15]  D. Deng,et al.  FEM analysis of residual stress induced by repair welding in SUS304 stainless steel pipe butt-welded joint , 2020 .

[16]  Jiangchao Wang,et al.  Influence of triangle reinforcement plate stiffeners on welding distortion mitigation of fillet welded structure for lightweight fabrication , 2020 .

[17]  J. Romanoff,et al.  Fatigue strength modelling of high-performing welded joints , 2020 .

[18]  A. Korsunsky,et al.  An experimental and numerical analysis of residual stresses in a TIG weldment of a single crystal nickel-base superalloy , 2020 .

[19]  B. Jang,et al.  The effect of weld residual stress on fracture toughness at the intersection of two welding lines of offshore tubular structure , 2020 .

[20]  Pengfei Liu,et al.  Numerical and experimental investigations of outside corner joints welding deformation of an aluminum autonomous catamaran vehicle by inherent strain/deformation FE analysis , 2020 .

[21]  Jiangchao Wang,et al.  Experiments of double curvature plate bending with induction heating and processing parameters investigation by computational analysis , 2019, Ocean Engineering.

[22]  M. Fitzpatrick,et al.  An iterative technique for the reconstruction of residual stress fields in a butt-welded plate from experimental measurement, and comparison with welding process simulation , 2019, International Journal of Mechanical Sciences.

[23]  Jungho Cho,et al.  Thermal efficiency decision of variable polarity aluminum arc welding through molten pool analysis , 2019, International Journal of Heat and Mass Transfer.

[24]  M. Mohammadi,et al.  Determination of acoustoelastic/acoustoplastic constants to measure stress in elastic/plastic limits by using LCR wave , 2019, NDT & E International.

[25]  Mato Perić,et al.  Numerical simulation of welding distortions in large structures with a simplified engineering approach , 2019, Open Physics.

[26]  Zhili Feng,et al.  Finite Element Analysis and In-Situ Measurement of Out-of-Plane Distortion in Thin Plate TIG Welding , 2019, Materials.

[27]  M. Ghiasi,et al.  Roll Dynamic Stability of an Autonomous Underwater Vehicle with a Fish-like Hull Shape , 2019 .

[28]  Michael R. Davis,et al.  The effect of centre bow and wet-deck geometry on wet-deck slamming loads and vertical bending moments of wave-piercing catamarans , 2018, Ocean Engineering.

[29]  Lele Zhang,et al.  A Uniform-Gaussian distributed heat source model for analysis of residual stress field of S355 steel T welding , 2018, Adv. Eng. Softw..

[30]  M. Ghiasi,et al.  Design of a Bio-inspired Hull Shape for an AUV from Hydrodynamic Stability Point of View through Experiment and Numerical Analysis , 2018, Journal of Bionic Engineering.

[31]  Jae-Woong Kim,et al.  Analysis of welding residual stress formation behavior during circumferential TIG welding of a pipe , 2018, Thin-Walled Structures.

[32]  Chunming Wang,et al.  Residual stress modelling in laser welding marine steel EH36 considering a thermodynamics-based solid phase transformation , 2018, International Journal of Mechanical Sciences.

[33]  A. Becker,et al.  On the interaction between welding residual stresses: A numerical and experimental investigation , 2018, International Journal of Mechanical Sciences.

[34]  P. Li,et al.  Pulse MIG Welding of 6061-T6/A356-T6 Aluminum Alloy Dissimilar T-joint , 2018, Journal of Materials Engineering and Performance.

[35]  Jiangchao Wang,et al.  Framework of computational approach based on inherent deformation for welding buckling investigation during fabrication of lightweight ship panel , 2018, Ocean Engineering.

[36]  Zdenko Tonković,et al.  Numerical simulation of a welding process using a prescribed temperature approach , 2018, Journal of Constructional Steel Research.

[37]  C. Guedes Soares,et al.  Validation of numerical simulations with X-ray diffraction measurements of residual stress in butt-welded steel plates , 2018 .

[38]  Liqun Li,et al.  High performance computation of residual stress and distortion in laser welded 301L stainless sheets , 2017 .

[39]  Chee Kai Chua,et al.  Fatigue damage evolution and lifetime prediction of welded joints with the consideration of residual stresses and porosity , 2017 .

[40]  P. Colegrove,et al.  Investigation of post-weld rolling methods to reduce residual stress and distortion , 2017 .

[41]  Thomas Ummenhofer,et al.  Practical aspects of welding residual stress simulation , 2017 .

[42]  M. Mochizuki,et al.  Transient distortion behavior during TIG welding of thin steel plate , 2017 .

[43]  Yu Huang,et al.  Study on deformation and residual stress of laser welding 316L T-joint using 3D/shell finite element analysis and experiment verification , 2017 .

[44]  M. Mochizuki,et al.  Temperature distribution effect on relation between welding heat input and angular distortion , 2017 .

[45]  Ninshu Ma,et al.  Recent research on welding distortion prediction in thin plate fabrication by means of elastic FE computation , 2016 .

[46]  Chunguang Xu,et al.  Nondestructive testing and characterization of residual stress field using an ultrasonic method , 2015, Chinese Journal of Mechanical Engineering.

[47]  C. Guedes Soares,et al.  Effect of welding sequence on temperature distribution, distortions, and residual stress on stiffened plates , 2016 .

[48]  A. Babkin,et al.  Determination of the effective radius of the heating spot of electric arcs , 2016 .

[49]  Liqun Li,et al.  Prediction of laser welding induced deformation in thin sheets by efficient numerical modeling , 2016 .

[50]  C. Guedes Soares,et al.  Numerical and parametric modeling and analysis of weld-induced residual stresses , 2015 .

[51]  R. Ajit Shenoi,et al.  Influence of welding sequence on welding deformation and residual stress of a stiffened plate structure , 2015 .

[52]  D. Aidun,et al.  Computational analysis of the effect of welding parameters on energy consumption in GTA welding process , 2015 .

[53]  Hidekazu Murakawa,et al.  Investigation of welding residual stress distribution in a thick-plate joint with an emphasis on the features near weld end-start , 2015 .

[54]  Gaurav Rajput,et al.  Influence of welding speed and power on residual stress during gas tungsten arc welding (GTAW) of thin sections with constant heat input: A study using numerical simulation and experimental validation , 2014 .

[55]  Pargat Singh,et al.  An Evaluation of TIG Welding Parametric Influence on Tensile Strength of 5083 Aluminium Alloy , 2014 .

[56]  Srećko Švaić,et al.  Numerical analysis and experimental investigation of welding residual stresses and distortions in a T-joint fillet weld , 2014 .

[57]  Yashar Javadi,et al.  Using ultrasonic waves and finite element method to evaluate through-thickness residual stresses distribution in the friction stir welding of aluminum plates , 2013, Materials & Design (1980-2015).

[58]  Dae Won Cho,et al.  Characterization of welding arc and weld pool formation in vacuum gas hollow tungsten arc welding , 2013 .

[59]  Michele Dassisti,et al.  Methods of measuring residual stresses in components , 2012 .

[60]  Mohammad Reza Forouzan,et al.  Residual stress prediction in submerged arc welded spiral pipes , 2012 .

[61]  Sung-Soo Kang,et al.  Investigations on welding residual stress and distortion in a cylinder assembly by means of a 3D finite element method and experiments , 2011 .

[62]  A. Kokabi,et al.  Effect of welding parameters on residual stresses in dissimilar joint of stainless steel to carbon steel , 2011 .

[63]  M. Mochizuki,et al.  Arc physics based heat source modelling for numerical simulation of weld residual stress and distortion , 2011 .

[64]  Alberto Cardona,et al.  Finite element modeling of welding processes , 2011 .

[65]  Yi Liu,et al.  Effect of welding sequence on residual stress and distortion in flat-bar stiffened plates , 2010 .

[66]  Shoichi Kiyoshima,et al.  Investigations on welding residual stresses in penetration nozzles by means of 3D thermal elastic plastic FEM and experiment , 2009 .

[67]  D. Deng.  FEM prediction of welding residual stress and distortion in carbon steel considering phase transformation effects , 2009 .

[68]  G. N. Labeas,et al.  Residual stress and distortion calculation of laser beam welding for aluminum lap joints , 2008 .

[69]  Wei Liang,et al.  Numerical simulation of welding distortion in large structures , 2007 .

[70]  Naoki Osawa,et al.  Study on shell-solid coupling FE analysis for fatigue assessment of ship structure , 2007 .

[71]  Lars-Erik Lindgren,et al.  Numerical modelling of welding , 2006 .

[72]  P. Maropoulos,et al.  Effects of welding speed, energy input and heat source distribution on temperature variations in butt joint welding , 2005 .

[73]  Tarasankar DebRoy,et al.  A heat-transfer and fluid-flow-based model to obtain a specific weld geometry using various combinations of welding variables , 2005 .

[74]  S. C. Park,et al.  Weldin g Distortion of a Thin-Plate Panel Structure , 1999 .

[75]  Yukio Ueda,et al.  Establishment of Computational Welding Mechanics(Mechanics, Strength & Structural Design) , 1995 .

[76]  Yogendra Joshi,et al.  Determination of gas tungsten arc welding efficiencies , 1994 .

[77]  Thomas W. Eagar,et al.  Distribution of the heat and current fluxes in gas tungsten arcs , 1985 .

[78]  J. Goldak,et al.  A new finite element model for welding heat sources , 1984 .

[79]  Y. Ueda,et al.  A Selection Method of Observing Positions for Highly Accurate Measurement of Residual Stresses(Welding Mechanics, Strength & Design) , 1980 .

[80]  D. Bray,et al.  Measurement of acoustoelastic and third-order elastic constants for rail steel , 1976 .

[81]  Yukio Ueda,et al.  ANALYSIS OF THERMAL ELASTIC-PLASTIC STRESS AND STRAIN DURING WELDING BY FINITE ELEMENT METHOD , 1971 .