Fretting wear behavior of CuNiAl against 42CrMo4 under different lubrication conditions

[1]  J. Archard,et al.  The temperature of rubbing bodies; part 2, the distribution of temperatures , 1988 .

[2]  Jm Dobromirski,et al.  Variables of Fretting Process: Are There 50 of Them? , 1992 .

[3]  J. Celis,et al.  Influence of humidity on the fretting wear of self-mated tetragonal zirconia ceramics , 2000 .

[4]  P. Kapsa,et al.  An investigation on fretting wear life of bonded MoS2 solid lubricant coatings in complex conditions , 2003 .

[5]  H. Sidhom,et al.  Corrosion fatigue crack propagation of a duplex stainless steel X6 Cr Ni Mo Cu 25-6 in air and in artificial sea water , 2003 .

[6]  Hui-di Zhou,et al.  Tribological behavior of Ni-based composite under distilled water lubrication , 2004 .

[7]  Young-Ze Lee,et al.  Friction and wear of Inconel 690 for steam generator tube in elevated temperature water under fretting condition , 2005 .

[8]  Yang Lu,et al.  Corrosion wear behavior of Al-bronzes in 3.5% NaCl solution , 2006 .

[9]  Feng Zhou,et al.  Tribological performance of phosphonium based ionic liquids for an aluminum-on-steel system and opinions on lubrication mechanism , 2006 .

[10]  S. Fouvry,et al.  High temperature fretting wear of a Ti alloy/CuNiIn contact , 2008 .

[11]  R. Chou,et al.  CuO, ZrO2 and ZnO nanoparticles as antiwear additive in oil lubricants , 2008 .

[13]  B. Basu,et al.  Fretting wear study on Ti–Ca–P biocomposite in dry and simulated body fluid , 2008 .

[14]  K. Rahmouni,et al.  Characterisation of anodic layers on Cu–10Sn bronze (RDE) in aerated NaCl solution , 2008 .

[15]  Y. Kondo,et al.  Fretting fatigue strength of SCM435H steel and SUH660 heat‐resistant steel in hydrogen gas environment , 2008 .

[16]  Guang-hong Zhou,et al.  Corrosion wear behaviors of 2024Al in artificial rainwater and seawater at fretting contact , 2009 .

[17]  Gary L. Doll,et al.  Fretting of WC/a-C:H and Cr2N Coatings Under Grease-Lubricated and Unlubricated Conditions , 2009 .

[18]  Q. Xue,et al.  Tribological behavior of PTFE sliding against steel in sea water , 2009 .

[19]  Lamine Dieng,et al.  Fretting-fatigue behaviour of bridge engineering cables in a solution of sodium chloride , 2009 .

[20]  L. Blunt,et al.  What results in fretting wear on polished femoral stems , 2009 .

[21]  Jiantao Zheng,et al.  Torsional fretting behaviors of LZ50 steel in air and nitrogen , 2009 .

[22]  Andrey A. Voevodin,et al.  The effect of temperature on gross slip fretting wear of cold-sprayed nickel coatings on Ti6Al4V interfaces , 2009 .

[23]  Minhao Zhu,et al.  Torsional fretting wear behaviour of 7075 aluminium alloy in various relative humidity environments , 2009 .

[24]  S. Fouvry,et al.  Fretting wear of stainless steels under variable temperature conditions: Introduction of a ‘composite’ wear law , 2010 .

[25]  D. Xiong,et al.  Effect of surface laser texture on friction properties of nickel-based composite , 2010 .

[26]  K. Kubiak,et al.  Surface morphology in engineering applications: Influence of roughness on sliding and wear in dry fretting , 2011 .

[27]  Xiaojun Xu,et al.  High temperature fretting wear behavior of WC–25Co coatings prepared by D-gun spraying on Ti–Al–Zr titanium alloy , 2011 .

[28]  S. Ge,et al.  Fretting wear behaviors of steel wires in coal mine under different corrosive mediums , 2011 .

[29]  S. Fouvry,et al.  Pressure and temperature effects on Fretting Wear damage of a Cu–Ni–In plasma coating versus Ti17 titanium alloy contact , 2011 .

[30]  L. Blunt,et al.  The Significance of the Micropores at the Stem–Cement Interface in Total Hip Replacement , 2011, Journal of biomaterials science. Polymer edition.

[31]  Minhao Zhu,et al.  Study on rotational fretting wear under a ball-on-concave contact configuration , 2011 .

[32]  Lamine Dieng,et al.  Influence of an aqueous environment on the fretting behaviour of steel wires used in civil engineering cables , 2011 .

[33]  D. Yoon,et al.  A study on fretting fatigue characteristics of Inconel 690 at high temperature , 2011 .

[34]  M. Roy,et al.  Fretting-corrosion behavior of β titanium alloys in simulated synovial fluid , 2011 .

[35]  A. Neville,et al.  Electrochemical investigation of corrosion and wear interactions under fretting conditions , 2012 .

[36]  Fengyuan Yan,et al.  Comparative investigation on the tribological behaviors of CF/PEEK composites under sea water lubrication , 2012 .

[37]  Shengyu Zhu,et al.  Tribological properties of bronze–graphite composites under sea water condition , 2012 .

[38]  Wei-min Liu,et al.  Tribological behavior of Cu–6Sn–6Zn–3Pb under sea water, distilled water and dry-sliding conditions , 2012 .

[39]  Liam Blunt,et al.  The influence of bone cement type on production of fretting wear on the femoral stem surface: a preliminary study. , 2012, Clinical biomechanics.

[40]  H. Zhang,et al.  Biotribological properties at the stem-cement interface lubricated with different media. , 2013, Journal of the mechanical behavior of biomedical materials.

[41]  Wei-min Liu,et al.  Fabrication and study on tribological characteristics of bronze-alumina-silver composite under sea water condition , 2013 .

[42]  Fengyuan Yan,et al.  Tribochemical aspects of silicon nitride ceramic sliding against stainless steel under the lubrication of seawater , 2013 .

[43]  P. H. Shipway,et al.  The effect of temperature on wear and friction of a high strength steel in fretting , 2013 .

[44]  J. Celis,et al.  Fretting and wear behaviors of Ni/nano-WC composite coatings in dry and wet conditions , 2015 .

[45]  Zhenbing Cai,et al.  Investigation on fretting wear behavior of 690 alloy in water under various temperatures , 2016 .

[46]  Torsional Tribological Behavior and Torsional Friction Model of Polytetrafluoroethylene against 1045 Steel , 2016, PloS one.

[47]  Xiaojun Liu,et al.  Torsional fretting wear behavior of CuNiAl against 42CrMo4 under flat on flat contact , 2017 .

[48]  Xiaojun Liu,et al.  Influence of surface topography on torsional fretting wear under flat-on-flat contact , 2017 .