In this paper, a boron-doped poly-Si crystallized by solution-based metal induced (S-MIC) as the anode of organic light emitting diode (OLED) was studied. The semi-transparent and semi-reflective anode of OLED systemized with the high reflectivity of Al cathode could form a micro-cavity structure with a low Q to improve the efficiency. The maximum luminance efficiency of red OLED made by Alq3: DCJTB (1.5wt %)( 30nm) with the poly-Si anode is 2.66cd/A, higher than that of the OLED with the ITO anodes by 30%. In order to improve the device performance, some key to optimize the character of MIC poly-Si thin film are analyzed theoretically. A new kind of TFT/OLED coupling structure in AMOLED was proposed, in which the pixel electrode of OLED was made by the same poly-Si thin film with its driver TFT's drain electrode. So that this coupling structure will simplify the AMOLED processes flow.
[1]
Y. Itoh,et al.
Organic photo- and electroluminescent devices with double mirrors
,
1993
.
[2]
Shizuo Tokito,et al.
Strongly directed single mode emission from organic electroluminescent diode with a microcavity
,
1996
.
[3]
H. Bässler,et al.
Microcavity effects in a spin‐coated polymer two‐layer system
,
1995
.
[4]
S R Forrest,et al.
Vacuum-deposited, nonpolymeric flexible organic light-emitting devices.
,
1997,
Optics letters.
[5]
A. Heeger,et al.
Flexible light-emitting diodes made from soluble conducting polymers
,
1992,
Nature.
[6]
Katsutoshi Nagai,et al.
Multilayer White Light-Emitting Organic Electroluminescent Device
,
1995,
Science.