Interaction of the Portevin–Le Chatelier phenomenon with ductile fracture of a thin aluminum CT specimen: experiments and simulations

[1]  M. Mazière,et al.  Portevin-Le Chatelier effect triggered by complex loading paths in an Al–Cu aluminium alloy , 2018, Philosophical Magazine.

[2]  S. Forest,et al.  Experimental and numerical analysis of the Lüders phenomenon in simple shear , 2017 .

[3]  C. Fressengeas,et al.  Effects of grain-to-grain interactions on shear strain localization in Al–Cu–Li rolled sheets , 2016 .

[4]  S. Forest,et al.  Crystal plasticity simulation of strain aging phenomena in α-titanium at room temperature , 2016 .

[5]  S. Roux,et al.  Slant strained band development during flat to slant crack transition in AA 2198 T8 sheet: in situ 3D measurements , 2016, International Journal of Fracture.

[6]  François Hild,et al.  On strain and damage interactions during tearing: 3D in situ measurements and simulations for a ductile alloy (AA2139-T3) , 2016 .

[7]  M. Grédiac,et al.  Calorimetric signature of the Portevin–Le Châtelier effect in an aluminum alloy from infrared thermography measurements and heat source reconstruction , 2016 .

[8]  Jeong Whan Yoon,et al.  Necking behavior of AA 6022-T4 based on the crystal plasticity and damage models , 2015 .

[9]  S. Quilici,et al.  Combining porous plasticity with Coulomb and Portevin-Le Chatelier models for ductile fracture analyses , 2015 .

[10]  Anne Denquin,et al.  Microstructural Characterization of Internal Welding Defects and Their Effect on the Tensile Behavior of FSW Joints of AA2198 Al-Cu-Li Alloy , 2014, Metallurgical and Materials Transactions A.

[11]  I. Sinclair,et al.  In situ 3-D observation of early strain localization during failure of thin Al alloy (2198) sheet , 2014 .

[12]  M. Luo,et al.  A fully coupled void damage and Mohr–Coulomb based ductile fracture model in the framework of a Reduced Texture Methodology , 2014 .

[13]  M. Luo,et al.  Modeling of large strain multi-axial deformation of anisotropic metal sheets with strength-differential effect using a Reduced Texture Methodology , 2014 .

[14]  P. Withers,et al.  Quantitative X-ray tomography , 2014 .

[15]  K. L. Nielsen,et al.  Observations on Mode I ductile tearing in sheet metals , 2013 .

[16]  D. Mohr,et al.  Determination of the Effect of Stress State on the Onset of Ductile Fracture Through Tension-Torsion Experiments , 2013 .

[17]  E. Drexler,et al.  Modeling flat to slant fracture transition using the computational cell methodology , 2013 .

[18]  François Hild,et al.  3D Digital Volume Correlation of Synchrotron Radiation Laminography Images of Ductile Crack Initiation: An Initial Feasibility Study , 2013 .

[19]  Burkhard Schillinger,et al.  Synchrotron and neutron laminography for three-dimensional imaging of devices and flat material specimens , 2012 .

[20]  T. Morgeneyer,et al.  Flat to slant ductile fracture transition: Tomography examination and simulations using shear-controlled void nucleation , 2011 .

[21]  E. Maire,et al.  Damage quantification in aluminium alloys using in situ tensile tests in X-ray tomography , 2011 .

[22]  F. Feyel,et al.  Finite Element Analysis of Damage in Ductile Structures Using a Nonlocal Model Combined with a Three-field Formulation , 2011 .

[23]  Jianqiang Chen.  Ductile tearing of AA2198 aluminium-lithium sheets for aeronautic application , 2011 .

[24]  S. Forest,et al.  Portevin–Le Chatelier (PLC) instabilities and slant fracture in C–Mn steel round tensile specimens , 2011 .

[25]  Frédéric Barlat,et al.  A novel approach for anisotropic hardening modeling. Part II: Anisotropic hardening in proportional and non-proportional loadings, application to initially isotropic material , 2010 .

[26]  S. Forest,et al.  Numerical aspects in the finite element simulation of the Portevin–Le Chatelier effect , 2010 .

[27]  Jacques Besson,et al.  Continuum Models of Ductile Fracture: A Review , 2010 .

[28]  Frédéric Barlat,et al.  A novel approach for anisotropic hardening modeling. Part I: Theory and its application to finite element analysis of deep drawing , 2009 .

[29]  S. Forest,et al.  Mechanical behavior and crack tip plasticity of a strain aging sensitive steel , 2009 .

[30]  I. Sinclair,et al.  Experimental and numerical analysis of toughness anisotropy in AA2139 Al-alloy sheet , 2009 .

[31]  J. Besson,et al.  A non-local finite element based on volumetric strain gradient: Application to ductile fracture , 2009 .

[32]  Y. Estrin,et al.  Geometrically non-linear modeling of the Portevin–Le Chatelier effect , 2009 .

[33]  Tore Børvik,et al.  An experimental and numerical investigation of the behaviour of AA5083 aluminium alloy in presence of the Portevin–Le Chatelier effect , 2008 .

[34]  C. O. Frederick,et al.  A mathematical representation of the multiaxial Bauschinger effect , 2007 .

[35]  G. Rousselier,et al.  A simplified “polycrystalline” model for viscoplastic and damage finite element analyses , 2006 .

[36]  G. Cailletaud,et al.  Micro-mechanical modeling of the inelastic behavior of directionally solidified materials , 2006 .

[37]  C. Prioul,et al.  Strain localization phenomena associated with static and dynamic strain ageing in notched specimens: experiments and finite element simulations , 2004 .

[38]  Ahmed Benallal,et al.  Flow and fracture characteristics of aluminium alloy AA5083–H116 as function of strain rate, temperature and triaxiality , 2004 .

[39]  M. Sutton,et al.  Three-dimensional stress and deformation fields around flat and slant cracks under remote Mode I loading conditions , 2003 .

[40]  S. Kok,et al.  Spatial coupling in jerky flow using polycrystal plasticity , 2003 .

[41]  Thomas Pardoen,et al.  Micromechanics-based model for trends in toughness of ductile metals , 2003 .

[42]  Jacques Besson,et al.  Modeling of crack growth in round bars and plane strain specimens , 2001 .

[43]  Y. Estrin,et al.  The morphology of Portevin–Le Chatelier bands: finite element simulation for Al–Mg–Si , 2001 .

[44]  Y. Estrin,et al.  Spatio-temporal dynamics of the Portevin-Le Chatelier effect: Experiment and modelling , 2000 .

[45]  Mauri Miettinen.  On localization and regularization , 1995, hep-th/9508127.

[46]  P. McCormick,et al.  Numerical Modelling of the Portevin Le Chatelier Effect , 1995 .

[47]  D. Delafosse,et al.  Dynamic strain ageing and crack propagation in the 2091 AlLi alloy , 1993 .

[48]  P. Hähner.  Modelling the spatiotemporal aspects of the Portevin-Le Châtelier effect , 1993 .

[49]  Y. Estrin,et al.  Modelling the transient flow behaviour of dynamic strain ageing materials , 1991 .

[50]  Y. Estrin,et al.  Evolution of dislocation densities and the critical conditions for the Portevin-Le Châtelier effect , 1990 .

[51]  P. McCormick.  Theory of flow localisation due to dynamic strain ageing , 1988 .

[52]  G. Rousselier,et al.  Ductile fracture models and their potential in local approach of fracture , 1987 .

[53]  Yuri Estrin,et al.  The portevin-Le Chatelier effect in deformation with constant stress rate , 1985 .

[54]  A. Needleman,et al.  Void Nucleation Effects in Biaxially Stretched Sheets , 1980 .

[55]  E. Kröner.  Zur plastischen verformung des vielkristalls , 1961 .

[56]  Kenneth Levenberg.  A METHOD FOR THE SOLUTION OF CERTAIN NON – LINEAR PROBLEMS IN LEAST SQUARES , 1944 .

[57]  G. Rousseliera,et al.  Numerical investigation of dynamic strain ageing and slant ductile fracture in a notched specimen and comparison with synchrotron tomography 3D-DVC , 2019 .

[58]  S. Forest,et al.  Strain gradient plasticity modeling and finite element simulation of Lüders band formation and propagation , 2015 .

[59]  Anne Denquin,et al.  Fatigue lifetime and tearing resistance of AA2198 Al–Cu–Li alloy friction stir welds: Effect of defects , 2015 .

[60]  Jean-Baptiste Leblond,et al.  A new numerical implementation of a second-gradient model for plastic porous solids, with an application to the simulation of ductile rupture tests , 2014 .

[61]  J. Hutchinson,et al.  Modification of the Gurson Model for shear failure , 2008 .

[62]  Bo Cerup Simonsen,et al.  Experimental and numerical modelling of ductile crack propagation in large-scale shell structures , 2004 .

[63]  G. Cailletaud.  A micromechanical approach to inelastic behaviour of metals , 1992 .

[64]  Elias C. Aifantis,et al.  The physics of plastic deformation , 1987 .

[65]  J. Chaboche,et al.  Viscoplastic constitutive equations for the description of cyclic and anisotropic behaviour of metals , 1977 .

[66]  C A Coulomb,et al.  ESSAI SUR UNE APPLICATION DES REGLES DE MAXIMIS ET MINIMIS A QUELQUES PROBLEMES DE STATIQUE RELATIFS A L'ARCHITECTURE (ESSAY ON MAXIMUMS AND MINIMUMS OF RULES TO SOME STATIC PROBLEMS RELATING TO ARCHITECTURE) , 1973 .