Life cycle approach in evaluating energy performance of residential buildings in Indian context

Abstract The paper presents life cycle energy (LCE) analysis of different types of residential buildings (one storey, two storey, and duplex and multi storey) in Indian context. A total of 10 houses’ designs were examined with energy saving features, e.g. thermal insulation on wall and roof, double pane glass for windows. One of these buildings was further examined to assess LCE performance with on-site power generation. Dynamic energy simulation tools DesignBuilder, e-Quest and EnergyPlus were used to assess energy performance of the buildings. LCE of the buildings is varying from 240 to 380 kWh/m 2  year depending on the type (envelope) of the building and climatic conditions. LCE savings of about 5–30% are observed with thermal insulation on wall and roof along with double pane glass for windows. It is found that net zero operating energy building can be achieved by on-site power generation from PV and wind turbine. LCE of the building for net zero operating energy is evaluated to be 71.24 kWh/m 2  year.

[1]  Sw Dean,et al.  Comparison of the Life Cycle Assessments of an Insulating Concrete Form House and a Wood Frame House , 2006 .

[2]  B. V. Venkatarama Reddy,et al.  Embodied energy of common and alternative building materials and technologies , 2003 .

[3]  Raymond J. Cole,et al.  Life-cycle energy use in office buildings , 1996 .

[4]  G. N. Tiwari,et al.  Embodied energy analysis of adobe house , 2009 .

[5]  S. Citherlet,et al.  Energy and environmental comparison of three variants of a family house during its whole life span , 2007 .

[6]  T. Muneer,et al.  Life cycle assessment: A case study of a dwelling home in Scotland , 2007 .

[7]  G. Treloar,et al.  Life-cycle energy analysis of buildings: a case study , 2000 .

[8]  Y. P. Singh,et al.  Comparative assessment of energy requirements for different types of residential buildings in India , 1995 .

[9]  K. Adalberth,et al.  Energy use during the life cycle of single-unit dwellings: Examples , 1997 .

[10]  Shabbir H. Gheewala,et al.  Indonesian residential high rise buildings: A life cycle energy assessment , 2009 .

[11]  Shabbir H. Gheewala,et al.  Life cycle energy assessment of a typical office building in Thailand , 2009 .

[12]  Ravi Prakash,et al.  Life cycle energy analysis of buildings: An overview , 2010 .

[13]  Andrew H. Buchanan,et al.  Energy and carbon dioxide implications of building construction , 1994 .

[14]  Zhang Xu,et al.  Inventory analysis of LCA on steel- and concrete-construction office buildings , 2008 .

[15]  Ravi Prakash,et al.  Life cycle energy analysis of a residential building with different envelopes and climates in Indian context , 2012 .

[16]  G. N. Tiwari,et al.  Simplified method of sizing and life cycle cost assessment of building integrated photovoltaic system , 2009 .

[17]  S. Gheewala,et al.  Life cycle energy of single landed houses in Indonesia , 2008 .

[18]  Mili Majumdar,et al.  Energy Efficient Buildings in India , 2009 .

[19]  Peter E.D. Love,et al.  Analysing the life-cycle energy of an Australian residential building and its householders , 2000 .

[20]  Tariq Muneer,et al.  An investigation into micro wind energy systems for their utilization in urban areas and their life cycle assessment , 2007 .

[21]  L. Gustavsson,et al.  Life cycle primary energy analysis of residential buildings , 2010 .

[22]  Brenda Vale,et al.  Life cycle analysis model for New Zealand houses , 2004 .