Synthesis, characterization and properties of polyimides derived from a symmetrical diamine containing bis-benzimidazole rings
暂无分享,去创建一个
[1] G. Qian,et al. Synthesis and characterization of high molecular weight hexafluoroisopropylidene‐containing polybenzimidazole for high‐temperature polymer electrolyte membrane fuel cells , 2009 .
[2] Hongwei Zhou,et al. Synthesis and characterization of thermally stable, high‐modulus polyimides containing benzimidazole moieties , 2009 .
[3] T. Uchida,et al. Morphology control of poly(2,2′-phenylene-5,5′-bibenzimidazole) by reaction-induced crystallization during polymerization , 2008 .
[4] Hongwei Zhou,et al. Design and synthesis of a tribranched phenylethynyl‐terminated aryl ether compound and its use as a reactive diluent for PETI‐5 , 2007 .
[5] Jie Yin,et al. Synthesis of novel sulfonated polybenzimidazole and preparation of cross-linked membranes for fuel cell application , 2007 .
[6] Suobo Zhang,et al. Synthesis and properties of novel soluble polyimides having a spirobisindane-linked dianhydride unit , 2007 .
[7] W. Xing,et al. Synthesis and characterization of novel sulfonated polyimides from 1,4-bis(4-aminophenoxy)-naphthyl-2,7-disulfonic acid , 2007 .
[8] G. Gebel,et al. Synthesis of Sulfonated Polybenzimidazoles from Functionalized Monomers: Preparation of Ionic Conducting Membranes , 2007 .
[9] M. Ding,et al. Syntheses and properties of novel polyimides derived from 2-(4-aminophenyl)-5-aminopyrimidine , 2006 .
[10] Jingling Yan,et al. Polyimides derived from 3,3 '-bis(N-aminophthalimide) , 2006 .
[11] Hongwei Zhou,et al. New kinds of phenylethynyl-terminated polyimide oligomers with low viscosity and good hydrolytic stability , 2006 .
[12] Yan-feng Li,et al. Synthesis and characterization of novel polyimides derived from 2,6-bis[4-(3,4-dicarboxyphenoxy)benzoyl]pyridine dianhydride and aromatic diamines , 2006 .
[13] Á. Lozano,et al. Synthesis, characterization, and properties of new sequenced poly(ether amide)s based on 2‐(4‐aminophenyl)‐5‐aminobenzimidazole and 2‐(3‐aminophenyl)‐5‐aminobenzimidazole , 2006 .
[14] S. Hsu,et al. Synthesis and characterization of novel aromatic poly(imide-benzoxazole) copolymers , 2005 .
[15] Shi-yong Yang,et al. Study on synthesis and characterization of novel polyimides derived from 2,6-Bis(3-aminobenzoyl) pyridine , 2005 .
[16] S. Mehdipour‐Ataei,et al. Synthesis and characterization of heat resistant, pyridine-based polyimides with preformed ether and ester groups , 2005 .
[17] S. Hsiao,et al. Polyimides derived from novel asymmetric ether diamine , 2005 .
[18] Süleyman Köytepe,et al. Synthesis, characterization and H2O2-sensing properties of pyrimidine-based hyperbranched polyimides , 2005 .
[19] G. Liao,et al. Poly(ether imide)s derived from phthalazinone‐containing dianhydrides , 2004 .
[20] C. Ha,et al. Microstructure and properties of 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA)‐p‐phenylene diamine (PDA) polyimide/poly(vinylsilsesquioxane) hybrid nanocomposite films , 2004 .
[21] M. Sarojadevi,et al. Synthesis and characterization of polyimides containing pyridine moiety , 2004 .
[22] A. Abdolmaleki,et al. Novel aromatic polyimides derived from benzofuro[2,3-b]benzofuran-2,3,8,9-tetracarboxylic dianhydride (BBTDA) , 2004 .
[23] S. Mehdipour‐Ataei,et al. Preparation of novel pyridine-based, thermally stable poly(ether imide)s , 2004 .
[24] Huei-Hsiung Wang,et al. Synthesis of thermally stable aromatic poly(imide amide benzimidazole) copolymers , 2003 .
[25] M. Kabbaj,et al. Preparation and characterization of new soluble benzimidazole–imide copolymers , 2002 .
[26] Fariborz Atabaki,et al. Synthesis and characterization of new thermally stable polybenzimidazoles and poly(amide-benzimidazole)s , 2002 .
[27] D. I. Bower,et al. An Introduction to Polymer Physics: Polymer blends, copolymers and liquid-crystal polymers , 2002 .
[28] H. Yeganeh,et al. Preparation and properties of novel polyimides derived from 4‐aryl‐2,6 bis(4‐amino phenyl)pyridine , 2001 .
[29] T. Sukhanova,et al. Morphology, deformation and failure behaviour of homo- and copolyimide fibres : 1. Fibres from 4,4'-oxybis(phthalic anhydride) (DPhO) and p-phenylenediamine (PPh) or/and 2,5-bis(4-aminophenyl)-pyrimidine (2,5PRM) , 1999 .
[30] Toshihiko Matsumoto,et al. Ladder-type polyimides based on diaminodibenzofurane , 1999 .
[31] Raymond E. Kirk,et al. Encyclopedia of chemical technology , 1998 .
[32] M. Vaultier,et al. Synthesis, Characterization, and Studies of Heat-Resistant Poly(ether benzimidazole)s , 1997 .
[33] S. Choe,et al. Hydrogen-Bonding Strength in the Blends of Polybenzimidazole with BTDA- and DSDA-Based Polyimides , 1997 .
[34] K. L. Mittal,et al. Polyimides: Fundamentals and Applications , 1996 .
[35] C. R. Nair,et al. Thermally stable polymers based on addition-type imidobenzoxazoles; synthesis and characterization of polybismaleimidobenzoxazoles and polybiscitraconimidobenzoxazoles , 1986 .
[36] E. Neuse,et al. Two-stage polybenzimidazole synthesis via poly(azomethine) intermediates , 1983 .
[37] J. Preston,et al. New high‐temperature polymers. VIII. Ordered benzoxazole‐ and benzothiazole‐imide copolymers , 1969 .
[38] J. H. Freeman,et al. Benzimidazole- and oxadiazole-modified aromatic polyimides , 1968 .
[39] C. Marvel,et al. Polybenzimidazoles, new thermally stable polymers , 1961 .