A novel gas-assisted microcellular injection molding method for preparing lightweight foams with superior surface appearance and enhanced mechanical performance

[1]  J. Morawiec,et al.  Effect of poly(tetrafluoroethylene) nanofibers on foaming behavior of linear and branched polypropylenes , 2017 .

[2]  M. Nofar.  Effects of nano-/micro-sized additives and the corresponding induced crystallinity on the extrusion foaming behavior of PLA using supercritical CO2 , 2016 .

[3]  Cheng-Long Xiao,et al.  Development and application of rapid thermal cycling molding with electric heating for improving surface quality of microcellular injection molded parts , 2016 .

[4]  Chul B. Park,et al.  Study of the bubble nucleation and growth mechanisms in high-pressure foam injection molding through in-situ visualization , 2016 .

[5]  V. Altstädt,et al.  Microcellular to nanocellular polymer foams : Progress(2004–2015) and future directions ; A review , 2015 .

[6]  Chul B. Park,et al.  Mechanical and morphological properties of injection molded linear and branched-polylactide (PLA) nanocomposite foams , 2015 .

[7]  Guoqun Zhao,et al.  Bubble morphological evolution and surface defect formation mechanism in the microcellular foam injection molding process , 2015 .

[8]  Guoqun Zhao,et al.  Research on formation mechanisms and control of external and inner bubble morphology in microcellular injection molding , 2015 .

[9]  Chul B. Park,et al.  Development of high void fraction polylactide composite foams using injection molding: Crystallization and foaming behaviors , 2015 .

[10]  H. Heim,et al.  General aspects of foam injection molding using local precision mold opening technology , 2015 .

[11]  L. Turng,et al.  A novel method of producing lightweight microcellular injection molded parts with improved ductility and toughness , 2015 .

[12]  M. Ohshima,et al.  Preparation of micro/nanocellular polypropylene foam with crystal nucleating agents , 2014 .

[13]  Ming‐bo Yang,et al.  Influence of high molecular weight component on the hierarchical crystalline structures of injection‐molded bars of polyethylene , 2014 .

[14]  Guoqun Zhao,et al.  Influence of relative low gas counter pressure on melt foaming behavior and surface quality of molded parts in microcellular injection molding process , 2014 .

[15]  Chul B. Park,et al.  Development of high void fraction polylactide composite foams using injection molding: Mechanical and thermal insulation properties , 2014 .

[16]  Chul B. Park,et al.  Open-cell cavity-integrated injection-molded acoustic polypropylene foams , 2014 .

[17]  Chul B. Park,et al.  Fundamental mechanisms of cell nucleation in polypropylene foaming with supercritical carbon dioxide—Effects of extensional stresses and crystals , 2013 .

[18]  Chul B. Park,et al.  Processing and characterization of solid and foamed injection-molded polylactide with talc , 2013 .

[19]  Chul B. Park,et al.  Effects of nano-/micro-sized additives on the crystallization behaviors of PLA and PLA/CO2 mixtures , 2013 .

[20]  S. Chen,et al.  The effects of gas counter pressure and mold temperature variation on the surface quality and morphology of the microcellular polystyrene foams , 2013 .

[21]  T. Ishikawa,et al.  Visual observation and numerical studies of polymer foaming behavior of polypropylene/carbon dioxide system in a core-back injection molding process , 2011 .

[22]  Martial Sauceau,et al.  New challenges in polymer foaming: A review of extrusion processes assisted by supercritical carbon dioxide , 2011 .

[23]  Jungjoo Lee,et al.  A novel method for improving the surface quality of microcellular injection molded parts , 2011 .

[24]  M. Ohshima,et al.  Effect of Growing Crystalline Phase on Bubble Nucleation in Poly(L-Lactide)/CO2 Batch Foaming , 2011 .

[25]  Dujing Wang,et al.  Shear-induced orientation in the crystallization of an isotactic polypropylene nanocomposite , 2009 .

[26]  W. Yuan,et al.  Effects of crystal structure on the foaming of isotactic polypropylene using supercritical carbon dioxide as a foaming agent , 2009 .

[27]  Rean-Der Chien,et al.  Variable mold temperature to improve surface quality of microcellular injection molded parts using induction heating technology , 2008 .

[28]  Chul B. Park,et al.  Effect of Processing Parameters on the Mechanical Properties of Injection Molded Thermoplastic Polyolefin (TPO) Cellular Foams , 2008 .

[29]  D. Rodrigue,et al.  Effect of Mold Temperature on Morphology and Mechanical Properties of Injection Molded HDPE Structural Foams , 2008 .

[30]  Leon P.B.M. Janssen,et al.  Supercritical carbon dioxide as a green solvent for processing polymer melts: Processing aspects and applications , 2006 .

[31]  Sung Woon Cha,et al.  Influence of Mould Temperature on the Thickness of a Skin Layer and Impact Strength in the Microcellular Injection Moulding Process , 2005 .

[32]  Mingjun Yuan,et al.  Microstructure and mechanical properties of microcellular injection molded polyamide-6 nanocomposites , 2005 .

[33]  S. Cha,et al.  The Relationship of Mold Temperatures and Swirl Marks on the Surface of Microcellular Plastics , 2005 .

[34]  L. Turng,et al.  Effects of nano-fillers and process conditions on the microstructure and mechanical properties of microcellular injection molded polyamide nanocomposites , 2003 .

[35]  Jingyi Xu,et al.  Microcellular foam processing in reciprocating-screw injection molding machines , 2001 .

[36]  Sumarno,et al.  Solubilities and diffusion coefficients of carbon dioxide and nitrogen in polypropylene, high-density polyethylene, and polystyrene under high pressures and temperatures , 1999 .

[37]  Chul B. Park,et al.  An extrusion system for the processing of microcellular polymer sheets: Shaping and cell growth control , 1996 .

[38]  N. Suh,et al.  A process for making microcellular thermoplastic parts , 1990 .

[39]  D. Bassett,et al.  An improved permanganic etchant for polyolefines , 1982 .

[40]  J. Martini,et al.  The Production and Analysis of Microcellular Thermoplastic Foam , 1982 .