论文信息 - Switching behavior of YBCO thin film conductors in resistive fault current limiters

Switching behavior of YBCO thin film conductors in resistive fault current limiters

The quenching process of YBCO thin film conductors designed for resistive fault current limiters has been analyzed by electrical and optical measurements. The influence of the switching voltage as well as the critical current and normal resistance of the thin film conductors on the quench propagation has been studied in detail. The experimental results show that homogeneous quenching can be achieved. The YBCO parameters can not be varied independently of the shunt layer thickness.

[1] G. Darcy Poulin,et al. CURRENT-VOLTAGE CHARACTERISTICS OF DC VOLTAGE BIASED HIGH TEMPERATURE SUPERCONDUCTING MICROBRIDGES , 1995 .

[2] H. Taniguchi,et al. Performance verification of a practical fault current limiter using YBCO thin film , 2001 .

[3] O. Fischer,et al. Properties of YBCO films at high current densities: fault current limiter implications , 2001 .

[4] Martin Lakner,et al. 6.4 MVA resitive fault current limiter based on Bi-2212 superconductor , 2002 .

[5] M. Lindmayer,et al. Fault current limiting properties of YBCO-films on sapphire substrates , 1999, IEEE Transactions on Applied Superconductivity.

[6] Mark E. Reeves,et al. A contactless method for measurement of the critical current density and critical temperature of superconducting films , 1991 .

[7] Helmut Kinder,et al. Homogeneous high quality YBa2Cu3O7 films on 3″ and 4″ substrates , 1994 .

[8] M. Lindmayer. High temperature superconductors as current limiters-an alternative to contacts and arcs in circuit breakers? , 1993, Proceedings of IEEE Holm Conference on Electrical Contacts.