The Effect of Si Addition on the Microstructure, Mechanical Properties, and Wear Rate of the Co–Cr–Mo-Based Biomedical Alloys

[1]  M. Taha,et al.  Impact of Hard and Soft Reinforcements on the Microstructure, Mechanical, and Physical Properties of the Surface Composite Matrix Manufactured by Friction Stir Processing , 2023, Coatings.

[2]  David J Armstrong,et al.  Controlling microstructure and mechanical properties of Ti-V-Cr-Nb-Ta refractory high entropy alloys through heat treatments , 2022, Journal of Alloys and Compounds.

[3]  D. Lou,et al.  Tribological and corrosion performance of the plasma-sprayed conformal ceramic coating on selective laser melted CoCrMo alloy. , 2021, Journal of the mechanical behavior of biomedical materials.

[4]  G. Matula,et al.  Structure and Properties of Co-Cr-Mo Alloy Manufactured by Powder Injection Molding Method , 2021, Materials.

[5]  Alfirano,et al.  Microstructural and Mechanical Characterization of As-Cast Co-Cr-Mo Alloys with Various Content of Carbon and Nitrogen , 2020, Materials Science Forum.

[6]  James V. Derose,et al.  Metallography – an Introduction , 2020 .

[7]  A. Chiba,et al.  Effects of Si concentrations on microstructure and mechanical properties of as-cast Co–Cr–Mo alloys , 2019, IOP Conference Series: Materials Science and Engineering.

[8]  Yun-lai Deng,et al.  Eliminating microstructural defects and improving the mechanical and fatigue properties of an Al–Mg–Si alloy extrusion by optimising homogenisation , 2019, Materials Science and Engineering: A.

[9]  A. Chiba,et al.  Impact of minor alloying with C and Si on the precipitation behavior and mechanical properties of N-doped Co-Cr alloy dental castings. , 2018, Materials science & engineering. C, Materials for biological applications.

[10]  A. Swarnakar,et al.  Effects of processing route on phase evolution and mechanical properties of CoCrCuFeNiSix high entropy alloys , 2018, Journal of Alloys and Compounds.

[11]  K. Kanlayasiri,et al.  Effect of Si on Microstructure and Corrosion Behavior of CoCrMo Alloys , 2018 .

[12]  Yunping Li,et al.  Strain-controlled iso-thermal fatigue behavior of Co–29Cr–6Mo used for tooling materials in Al die casting , 2017 .

[13]  L. Murr,et al.  Corrosion resistance of Ti-6Al-4V and ASTM F75 alloys processed by electron beam melting , 2017 .

[14]  M. Ide,et al.  Silicon Nitride (Si3N4) Implants: The Future of Dental Implantology? , 2017, The Journal of oral implantology.

[15]  K. Kuramoto,et al.  Manufacturing of high-strength Ni-free Co-Cr-Mo alloy rods via cold swaging. , 2016, Journal of the mechanical behavior of biomedical materials.

[16]  Yunping Li,et al.  Influences of alloyed Si on the corrosion resistance of Co–Cr–Mo alloy to molten Al by iso-thermal oxidation in air , 2015 .

[17]  Yunping Li,et al.  Effects of alloyed Si on the oxidation behaviour of Co–29Cr–6Mo alloy for solid-oxide fuel cell interconnects , 2015 .

[18]  Yunping Li,et al.  Effects of microstructures on the sliding behavior of hot-pressed CoCrMo alloys , 2014 .

[19]  K. Kuramoto,et al.  Development of new Co–Cr–W-based biomedical alloys: Effects of microalloying and thermomechanical processing on microstructures and mechanical properties , 2014 .

[20]  M. Hernandez-Rodriguez,et al.  Tribological Behavior of a Heat-Treated Cobalt-Based Alloy , 2013, Journal of Materials Engineering and Performance.

[21]  D. Soares,et al.  Influence of preoxidation cycle on the bond strength of CoCrMoSi–porcelain dental composites , 2012 .

[22]  S. Spriano,et al.  Characterization of Co-Cr-Mo alloys after a thermal treatment for high wear resistance. , 2012, Materials science & engineering. C, Materials for biological applications.

[23]  M. Edirisinghe,et al.  Cobalt-based orthopaedic alloys: Relationship between forming route, microstructure and tribological performance , 2012 .

[24]  Yunping Li,et al.  Interfacial reactions between molten Al and a Co–Cr–Mo alloy with and without oxidation treatment , 2011 .

[25]  Z. Xue.  Preface , 2011 .

[26]  Alfirano,et al.  Precipitates in As-Cast and Heat-Treated ASTM F75 Co-Cr-Mo-C Alloys Containing Si and/or Mn , 2011 .

[27]  N. Nomura,et al.  Pin-on-disk wear behavior in a like-on-like configuration in a biological environment of high carbon cast and low carbon forged Co–29Cr–6Mo alloys , 2007 .

[28]  A. Chiba,et al.  Microstructure and corrosion behaviour in biological environments of the new forged low-Ni Co-Cr-Mo alloys. , 2005, Biomaterials.

[29]  Mitsuo Niinomi,et al.  Recent metallic materials for biomedical applications , 2002 .

[30]  J. Hawk,et al.  Abrasive wear properties of Cr–Cr3Si composites , 2001 .

[31]  S. Atamert,et al.  Comparison of the microstructures and abrasive wear properties of stellite hardfacing alloys deposited by arc welding and laser cladding , 1989 .

[32]  F. Jia,et al.  Effect of Si element on phase transformation and mechanical properties for FeCoCrNiSix high entropy alloys , 2021 .

[33]  O. Fornaro,et al.  Microstructural characterization of as-cast biocompatible Co―Cr―Mo alloys , 2011 .

[34]  Dominick V. Rosato,et al.  3 – DESIGN PARAMETER , 2003 .