Mathematical modeling, experimental validation and observer design for a capacitively actuated microcantilever

We present a mathematical model for the dynamics on an electrostatically actuated micro-cantilever. For the common case of cantilever excited by a periodic voltage, we show that the underlying linearized dynamics are those of a periodic system described by a Mathieu equation. We present experimental results that confirm the validity of the model, and in particular, illustrate that parametric resonance phenomena occur in capacitively actuated microcantilevers. We propose a system where the current measured is used as the sensing signal of the cantilever state and position through a dynamical observer. By investigating how the best achievable performance of an optimal observer depends on the excitation frequency, we show that the best such frequency is not necessarily the resonant frequency of the cantilever.

[1]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[2]  Gerd Binnig,et al.  Atomic Resolution with Atomic Force Microscope , 1987 .

[3]  P. Khargonekar,et al.  Filtering and smoothing in an H/sup infinity / setting , 1989, Proceedings of the 28th IEEE Conference on Decision and Control,.

[4]  P. Khargonekar,et al.  Filtering and smoothing in an H/sup infinity / setting , 1991 .

[5]  Bassam Bamieh,et al.  Minimization of the L∞-Induced Norm for Sampled-Data Systems , 1992, 1992 American Control Conference.

[6]  M. Dahleh,et al.  Minimization of the L∞-induced norm for sampled-data systems , 1993, IEEE Trans. Autom. Control..

[7]  Bruce A. Francis,et al.  Optimal Sampled-Data Control Systems , 1996, Communications and Control Engineering Series.

[8]  C. Quate,et al.  Parallel atomic force microscopy using cantilevers with integrated piezoresistive sensors and integrated piezoelectric actuators , 1995 .

[9]  Tadatomo Suga,et al.  Piezoelectric cantilever array for multiprobe scanning force microscopy , 1996, Proceedings of Ninth International Workshop on Micro Electromechanical Systems.

[10]  N. D. Rooij,et al.  Scanning force microscopy in the dynamic mode using microfabricated capacitive sensors , 1996 .

[11]  M. Esashi,et al.  Capacitive AFM Probe for High Speed Imaging , 1998 .

[12]  Thomas W. Kenny,et al.  Independent detection of vertical and lateral forces with a sidewall-implanted dual-axis piezoresistive cantilever , 1998 .

[13]  A. Bosseboeuf,et al.  Fabrication and characterization of electrostatically driven silicon microbeams , 1998 .

[14]  W. von Münch,et al.  Piezoelectric bimorph cantilever for actuating and sensing applications , 1998 .

[15]  Neville Ka-shek Lee,et al.  A simple approach to characterizing the driving force of polysilicon laterally driven thermal microactuators , 2000 .

[16]  Bassam Bamieh,et al.  Modeling and observer design for an array of electrostatically actuated microcantilevers , 2001, Proceedings of the 40th IEEE Conference on Decision and Control (Cat. No.01CH37228).