A study on the high-flux MBR system using PTFE flat sheet membranes with chemical backwashing

[1]  Kanji Matsumoto,et al.  Comparison of Polytetrafluoroethylene Flat-Sheet Membranes with Different Pore Sizes in Application to Submerged Membrane Bioreactor , 2012, Membranes.

[2]  H. Tseng,et al.  The effect of blending ratio on the compatibility, morphology, thermal behavior and pure water permeation of asymmetric CAP/PVDF membranes , 2012 .

[3]  Yu-Tzu Huang,et al.  Identifications and characterizations of proteins from fouled membrane surfaces of different materials , 2012 .

[4]  How Yong Ng,et al.  Membrane fouling in a submerged membrane bioreactor using track-etched and phase-inversed porous membranes , 2009 .

[5]  G. Civelekoglu,et al.  Effects of various backwash scenarios on membrane fouling in a membrane bioreactor , 2009 .

[6]  S. Chen,et al.  Pore size control of PTFE membranes by stretch operation with asymmetric heating system , 2008 .

[7]  TorOve Leiknes,et al.  Impact of aeration rates on particle colloidal fraction in the biofilm membrane bioreactor (BF-MBR) , 2008 .

[8]  Wenshan Guo,et al.  Evaluation of a novel sponge-submerged membrane bioreactor (SSMBR) for sustainable water reclamation. , 2008, Bioresource technology.

[9]  Xian‐Wen Wei,et al.  Mitigated membrane fouling in an SMBR by surface modification , 2008 .

[10]  Jae-Hoon Choi,et al.  Effect of membrane type and material on performance of a submerged membrane bioreactor. , 2008, Chemosphere.

[11]  Pierre R. Bérubé,et al.  Membrane fouling mechanisms of a membrane enhanced biological phosphorus removal process , 2007 .

[12]  Pierre Le-Clech,et al.  Fouling in membrane bioreactors used in wastewater treatment , 2006 .

[13]  Seong-Hoon Yoon,et al.  A novel flux enhancing method for membrane bioreactor (MBR) process using polymer , 2006 .

[14]  Simon Judd,et al.  The MBR Book: Principles and Applications of Membrane Bioreactors for Water and Wastewater Treatment , 2006 .

[15]  Guocheng Du,et al.  Treatment of synthetic wastewater by a novel MBR with granular sludge developed for controlling membrane fouling , 2005 .

[16]  J.H.J.M. van der Graaf,et al.  Filtration characterisation for assessing MBR performance: three cases compared , 2005 .

[17]  Huu Hao Ngo,et al.  Design of a generic control system for optimising back flush durations in a submerged membrane hybrid reactor , 2005 .

[18]  D. Bagley,et al.  A Review of Biofouling and its Control in Membrane Separation Bioreactors , 2004, Water environment research : a research publication of the Water Environment Federation.

[19]  Renbi Bai,et al.  MEMBRANE FOULING AND CLEANING IN MICROFILTRATION OF ACTIVATED SLUDGE WASTEWATER , 2003 .

[20]  R. Bai,et al.  Microfiltration of activated sludge wastewater—the effect of system operation parameters , 2002 .

[21]  Anthony G. Fane,et al.  The effect of fibre diameter on filtration and flux distribution — relevance to submerged hollow fibre modules , 2001 .

[22]  H. Nagaoka,et al.  Influence of bacterial extracellular polymers on the membrane separation activated sludge process , 1996 .