论文信息 - Compensation of compliance errors in parallel manipulators composed of non-perfect kinematic chains

Compensation of compliance errors in parallel manipulators composed of non-perfect kinematic chains

The paper is devoted to the compliance errors compensation for parallel manipulators under external loading. Proposed approach is based on the non-linear stiffness modeling and reduces to a proper adjusting of a target trajectory. In contrast to previous works, in addition to compliance errors caused by machining forces, the problem of assembling errors caused by inaccuracy in the kinematic chains is considered. The advantages and practical significance of the proposed approach are illustrated by examples that deal with groove milling with Orthoglide manipulator.

Geir Hovland | Damien Chablat | Anatoly Pashkevich | Alexandr Klimchik

[1] Philippe Dépincé,et al. Active integration of tool deflection effects in end milling. Part 1. Prediction of milled surfaces , 2006 .

[2] Philippe Dépincé,et al. Active integration of tool deflection effects in end milling. Part 2. Compensation of tool deflection , 2006 .

[3] Wisama Khalil,et al. Model Identification , 2019, Springer Handbook of Robotics, 2nd Ed..

[4] H. Su,et al. A Polynomial Homotopy Formulation of the Inverse Static Analysis of Planar Compliant Mechanisms , 2006 .

[5] Jun Ni,et al. Nongeometric error identification and compensation for robotic system by inverse calibration , 2000 .

[6] Damien Chablat,et al. Enhanced stiffness modeling of manipulators with passive joints , 2011, ArXiv.

[7] Clément Gosselin,et al. Parametric Stiffness Analysis of the Orthoglide , 2004, ArXiv.

[8] Damien Chablat,et al. Architecture optimization of a 3-DOF translational parallel mechanism for machining applications, the orthoglide , 2003, IEEE Trans. Robotics Autom..