Size-reduction and band-broadening design technique of uniplanar hybrid ring coupler using phase inverter for M(H)MIC's

The hybrid coupler is one of the most fundamental building blocks in microwave and millimeter-wave systems. Ring topology can be often found in the hybrid microwave integrated-circuit design of narrow and broad-band integrated couplers and mixers. In this paper, we propose a new design theory using a phase inverter for systematic size reduction and band broadening of a uniplanar hybrid ring coupler. The features and design criteria of broad-band reverse-phase hybrid ring couplers are presented. Effective bandwidth of a new reverse-phase hybrid ring coupler can be increased by 28% with a return loss of 20 dB. In addition, we present a class of uniplanar phase inverters and discuss their technical aspects. Experimental results show that the bandwidth of the proposed phase inverter is greater than 1.9 octaves with insertion loss below 1 dB and phase shift error of less than /spl plusmn/20/spl deg/. Measurements confirm that the new uniplanar hybrid ring coupler provides attractive features. Its isolation is better than 20 dB over a 1.8-octave bandwidth attributed to the phase inverter providing almost a frequency-independent phase shift.

[1]  R. K. Hoffmann,et al.  Microstrip-Slot Coupler Design-Part I: S-Parameters of Uncompensated and Compensated Couplers , 1982 .

[2]  B. Schiek,et al.  Hybrid Branchline Couplers -- A Useful New Class of Directional Couplers , 1974 .

[3]  Ke Wu,et al.  Experimental study of wideband uniplanar phase inverters for MICs , 1997, IMS 1997.

[4]  Isabelle Zaquine,et al.  New wideband, 0.67λg circumference 180° hybrid ring coupler , 1994 .

[5]  S. March.  A Wideband Stripline Hybrid Ring (Correspondence) , 1968 .

[6]  I. Kneppo,et al.  Basic Parameters of Nonsymmetrical Coplanar Line , 1977 .

[7]  Dong Il Kim,et al.  Broad-Band Design of Improved Hybrid-Ring 3-dB Directional Couplers , 1982 .

[8]  C. Y. Pon.  Hybrid-Ring Directional Coupler for Arbitrary Power Divisions , 1961 .

[9]  J. Reed,et al.  A Method of Analysis of Symmetrical Four-Port Networks , 1956 .

[10]  J. Lange,et al.  Interdigitated Strip-Line Quadrature Hybrid , 1969 .

[11]  B. Heimer,et al.  Uniplanar hybrid couplers using asymmetrical coplanar strip lines , 1997, 1997 IEEE MTT-S International Microwave Symposium Digest.

[12]  Dong Il Kim,et al.  Design of new hybrid-ring, directional coupler using lambda /8 or lambda /6 sections , 1991 .

[13]  Ke Wu,et al.  An efficient approach to modeling of quasiplanar structures using the formulation of power conservation in spectral domain , 1995 .

[14]  J.A.G. Malherbe,et al.  Design Curves for --3-dB Branchline Couplers (Short Paper) , 1985 .

[15]  H. Ogawa,et al.  Uniplanar MMIC Hybrids--A Proposed New MMIC Structure , 1987 .

[16]  Masahiro Muraguchi,et al.  Uniplanar MMIC's and their applications , 1988 .

[17]  Kai Chang,et al.  New uniplanar coplanar waveguide hybrid-ring couplers and magic-T's , 1994 .

[18]  Y. Suzuki,et al.  Characterization Method and Simple Design Formulas of MCS Lines Proposed for MMIC's , 1987, 1987 IEEE MTT-S International Microwave Symposium Digest.

[19]  Kai Chang,et al.  Uniplanar MIC power dividers using coupled CPW and asymmetrical CPS , 1996, 1996 IEEE MTT-S International Microwave Symposium Digest.