LFO Modified Separator for the Initial Anode Irreversibility Compensation in Lithium-Ion Rechargeable Full Cells

[1]  Jun Wang,et al.  Beyond LiF: Tailoring Li2O-Dominated Solid Electrolyte Interphase for Stable Lithium Metal Batteries. , 2024, ACS nano.

[2]  Stacy M. Trey,et al.  Powder-impregnated carbon fibers with lithium iron phosphate as positive electrodes in structural batteries , 2023, Composites Science and Technology.

[3]  Faquan Yu,et al.  Synergy and Symbiosis Analysis of Capacity-Contributing Polypyrrole and Carbon-Coated Lithium Iron Phosphate Nanostructures for High-Performance Cathode Materials , 2023, ACS Applied Nano Materials.

[4]  X. Qiu,et al.  Improvement of electrochemical properties of lithium iron phosphate cathode by rare earth oxides modification , 2023, Journal of Alloys and Compounds.

[5]  F. Lou,et al.  Leveraging Synergies by Combining Polytetrafluorethylene with Polyvinylidene Fluoride for Solvent‐Free Graphite Anode Fabrication , 2022, Energy Technology.

[6]  Yanshuang Meng,et al.  Preparation and electrochemical properties of Co doped core-shell cathode material on a lithium iron phosphate surface , 2022, Journal of Alloys and Compounds.

[7]  Ming Chen,et al.  Dawson-Type Polyoxometalate Modified Separator for Anchoring/Catalyzing Polysulfides in High-Performance Lithium-Sulfur Batteries , 2022, SSRN Electronic Journal.

[8]  Kun Xu,et al.  Three-dimensional printed lithium iron phosphate coated with magnesium oxide cathode with improved areal capacity and ultralong cycling stability for high performance lithium-ion batteries. , 2022, Journal of colloid and interface science.

[9]  Florian J. Günter,et al.  State of the Art of Lithium-Ion Pouch Cells in Automotive Applications: Cell Teardown and Characterization , 2022, Journal of The Electrochemical Society.

[10]  Guangming Li,et al.  Comparative life cycle assessment of LFP and NCM batteries including the secondary use and different recycling technologies. , 2022, The Science of the total environment.

[11]  Guangchuan Liang,et al.  High-temperature solid-phase synthesis of lithium iron phosphate using polyethylene glycol grafted carbon nanotubes as the carbon source for rate-type lithium-ion batteries , 2022, Journal of Electroanalytical Chemistry.

[12]  G. Diao,et al.  Embedding Cobalt Atom Clusters in CNT-Wired MoS2 Tube-in-Tube Nanostructures with Enhanced Sulfur Immobilization and Catalyzation for Li-S Batteries. , 2021, Small.

[13]  Jiaqi Huang,et al.  Advanced electrode processing of lithium ion batteries: A review of powder technology in battery fabrication , 2021 .

[14]  Z. Seh,et al.  Promises and Challenges of the Practical Implementation of Prelithiation in Lithium‐Ion Batteries , 2021, Advanced Energy Materials.

[15]  Xiaobo Ji,et al.  Prelithiation/Presodiation Techniques for Advanced Electrochemical Energy Storage Systems: Concepts, Applications, and Perspectives , 2020, Advanced Functional Materials.

[16]  Liming Jin,et al.  Progress and perspectives on pre-lithiation technologies for lithium ion capacitors , 2020 .

[17]  Jiulin Wang,et al.  Towards practical Li–S battery with dense and flexible electrode containing lean electrolyte , 2020 .

[18]  W. Hawley,et al.  Electrode manufacturing for lithium-ion batteries—Analysis of current and next generation processing , 2019, Journal of Energy Storage.

[19]  Zhengqiang Pan,et al.  Impedance characterization of lithium-ion batteries aging under high-temperature cycling: Importance of electrolyte-phase diffusion , 2019, Journal of Power Sources.

[20]  U. Paik,et al.  In Situ Cross-linked Carboxymethyl Cellulose-Polyethylene Glycol Binder for Improving the Long-Term Cycle Life of Silicon Anodes in Li Ion Batteries , 2019, Industrial & Engineering Chemistry Research.

[21]  Jim P. Zheng,et al.  Dry Process for Fabricating Low Cost and High Performance Electrode for Energy Storage Devices , 2019, MRS Advances.

[22]  P. He,et al.  Rechargeable Solid‐State Li–Air and Li–S Batteries: Materials, Construction, and Challenges , 2018 .

[23]  Claus Daniel,et al.  Technical and economic analysis of solvent-based lithium-ion electrode drying with water and NMP , 2018 .

[24]  Su Zhang,et al.  Robust electrical “highway” network for high mass loading sulfur cathode , 2017 .

[25]  G. Lindbergh,et al.  Li4Ti5O12 flexible, lightweight electrodes based on cellulose nanofibrils as binder and carbon fibers as current collectors for Li-ion batteries , 2017 .

[26]  J. Banhart,et al.  Complementary X-ray and neutron radiography study of the initial lithiation process in lithium-ion batteries containing silicon electrodes , 2017 .

[27]  Yun-Sung Lee,et al.  Research Progress on Negative Electrodes for Practical Li‐Ion Batteries: Beyond Carbonaceous Anodes , 2015 .

[28]  Hyun-Wook Lee,et al.  Dry-air-stable lithium silicide–lithium oxide core–shell nanoparticles as high-capacity prelithiation reagents , 2014, Nature Communications.

[29]  G. Lindbergh,et al.  The effect of lithium-intercalation on the mechanical properties of carbon fibres , 2014 .

[30]  B. Landi,et al.  Prelithiation of silicon-carbon nanotube anodes for lithium ion batteries by stabilized lithium metal powder (SLMP). , 2013, Nano letters.

[31]  K. Nishimura,et al.  Lithium manganese aluminum oxide-based full Li-ion battery using carbon fibers as current collectors , 2013, Ionics.

[32]  Erik T. Thostenson,et al.  Electrophoretic deposition of carbon nanotubes onto carbon-fiber fabric for production of carbon/epoxy composites with improved mechanical properties , 2012 .

[33]  N. Dudney,et al.  Advanced Lithium Battery Cathodes Using Dispersed Carbon Fibers as the Current Collector , 2011 .

[34]  Yi Cui,et al.  Prelithiated silicon nanowires as an anode for lithium ion batteries. , 2011, ACS nano.

[35]  J. Goodenough,et al.  Challenges for Rechargeable Li Batteries , 2010 .

[36]  James F. Snyder,et al.  Evaluation of Commercially Available Carbon Fibers, Fabrics, and Papers for Potential Use in Multifunctional Energy Storage Applications , 2009 .

[37]  Y. Takeda,et al.  Carbon as negative electrodes in lithium secondary cells , 1989 .

[38]  Xiao‐Qing Yang,et al.  High performance lithium-ion and lithium–sulfur batteries using prelithiated phosphorus/carbon composite anode , 2020 .