Feature profile evolution during shallow trench isolation etch in chlorine-based plasmas. I. Feature scale modeling

The authors developed a cellular based Monte Carlo (MC) feature scale model capable of direct coupling to the dominant plasma species ratios from a reactor scale model in order to simulate the profile evolution of shallow trench isolation etch in chlorine-based plasmas and its variation from the center to the edge of the wafer. Carefully planned experiments along with scanning electron microscopy (SEM) were used to calibrate the MC model, where one to two plasma parameters were systematically varied. Simulated feature profiles were found to agree well with experimental observations, capturing details such as microtrenching, faceting, tapering, and bowing. The particle counts used to achieve these fits agreed well with those estimated from SEM, corroborating the chemistry and physics used in the feature scale model. In addition, the feature scale model uses a novel surface representation that eliminates the artificial flux fluctuations originating from the discrete cells used in the simulation and enables ...

[1]  Masami Hane,et al.  Notching as an example of charging in uniform high density plasmas , 1996 .

[2]  J. Keller,et al.  Inductive plasmas for plasma processing , 1996 .

[3]  A. Neureuther,et al.  A general simulator for VLSI lithography and etching processes: Part I—Application to projection lithography , 1979, IEEE Transactions on Electron Devices.

[4]  David B. Graves,et al.  The recombination of chlorine atoms at surfaces , 1998 .

[5]  E. Aydil,et al.  Feature scale model of Si etching in SF6∕O2∕HBr plasma and comparison with experiments , 2005 .

[6]  T. W. Hamilton,et al.  Ion energy and angular distributions in inductively driven radio frequency discharges in chlorine , 1997 .

[7]  Dimitri D. Vvedensky,et al.  Multiscale modelling of nanostructures , 2004 .

[8]  Jane P. Chang,et al.  Feature profile evolution during shallow trench isolation etch in chlorine-based plasmas. II. Coupling reactor and feature scale models , 2008 .

[9]  D. Graves,et al.  Effect of neutral transport on the etch product lifecycle during plasma etching of silicon in chlorine gas , 2003 .

[10]  Kouichi Ono,et al.  Chemical Kinetics of Chlorine in Electron Cyclotron Resonance Plasma Etching of Si , 1994 .

[11]  D. C. Gray,et al.  Phenomenological modeling of ion‐enhanced surface kinetics in fluorine‐based plasma etching , 1993 .

[12]  C. W. Jurgensen,et al.  Factors controlling the etching rate and etching profile in the O2 reactive ion etching pattern transfer step in multilevel lithography , 1989 .

[13]  E. Hudson,et al.  Profile simulation of high aspect ratio contact etch , 2005 .

[14]  Krishna C. Saraswat,et al.  Analytical modeling of silicon etch process in high density plasma , 1999 .

[15]  Jane P. Chang,et al.  Kinetic study of low energy argon ion-enhanced plasma etching of polysilicon with atomic/molecular chlorine , 1997 .

[16]  H. Sawin,et al.  Feature profile evolution in high-density plasma etching of silicon with Cl2 , 2003 .

[17]  M. Kushner,et al.  Investigations of surface reactions during C2F6 plasma etching of SiO2 with equipment and feature scale models , 2001 .

[18]  M. Lieberman,et al.  Role of etch products in polysilicon etching in a high-density chlorine discharge , 1996 .

[19]  J. Sethian,et al.  Fronts propagating with curvature-dependent speed: algorithms based on Hamilton-Jacobi formulations , 1988 .

[20]  D. Corliss,et al.  Microtrench Formation in Polysilicon Plasma Etching over Thin Gate Oxide , 1993 .

[21]  K. Jensen,et al.  MULTISCALE MODELING OF THIN FILM GROWTH , 1998 .

[22]  K. Jensen,et al.  Multiscale modeling of chemical vapor deposition , 1998 .

[23]  Duane S. Boning,et al.  Pattern Based Prediction for Plasma Etch , 2007 .

[24]  Effects of SiO2∕Si3N4 hard masks on etching properties of metal gates , 2006 .

[25]  G. Yeom,et al.  Study of shallow silicon trench etch process using planar inductively coupled plasmas , 1997 .

[26]  Jane P. Chang,et al.  Plasma-surface kinetics and feature profile evolution in chlorine etching of polysilicon , 1998 .

[27]  T. W. Hamilton,et al.  Ion energy distribution functions in inductively coupled radio-frequency discharges—Mixtures of Cl2/BCl3/Ar , 1998 .

[28]  Krishna C. Saraswat,et al.  Modeling and simulation of feature-size-dependent etching of metal stacks , 2001 .

[29]  Michael J. Bear,et al.  Plasma etch/deposition modeling: A new dynamically coupled multiscale code and comparison with experiment , 2000 .

[30]  S. J. Pearton,et al.  Effect of inert gas additive on Cl2-based inductively coupled plasma etching of NiFe and NiFeCo , 1999 .

[31]  E. Aydil,et al.  In situ measurement of the ion incidence angle dependence of the ion-enhanced etching yield in plasma reactors , 2006 .

[32]  D. Sparks,et al.  Plasma Etching of Si, SiO2, Si3 N 4, and Resist with Fluorine, Chlorine, and Bromine Compounds , 1992 .

[33]  H. Sawin,et al.  Etching of polysilicon in inductively coupled Cl2 and HBr discharges. II. Simulation of profile evolution using cellular representation of feature composition and Monte Carlo computation of flux and surface kinetics , 2002 .

[34]  T. Cale,et al.  Deposition and etch processes: continuum film evolution in microelectronics , 1998 .

[35]  John P. Verboncoeur,et al.  A method for computing ion energy distributions for multifrequency capacitive discharges , 2007 .

[36]  James P. McVittie,et al.  SPEEDIE: a profile simulator for etching and deposition , 1991, Other Conferences.