Aeroelastic and local buckling optimisation of a variable-angle-tow composite wing-box structure

Abstract Benefiting from curved fibre paths, variable-angle-tow (VAT) fibre composites feature a larger design space than traditional straight-fibre reinforced plastics. Herein, an optimisation framework of a full-scale wing-box structure with VAT-fibre composites is presented, aiming at minimised mass and optimised local buckling performance under realistic aeroelastic loading conditions. Local buckling analyses on individual subsections of the wing are performed with refined finite-element models by extracting running loads from an aeroelastic analysis of the entire wing structure. Using this global–local approach, an optimisation is conducted with static failure, aeroelastic, buckling and manufacturing constraints to obtain optimised structural parameters for straight- and VAT-fibre composite wing-box architectures. By optimising wing-skin thicknesses, fibre paths and wing-spar geometry simultaneously via a genetic algorithm, the potential benefit of a VAT design is explored. In addition, the continuous tow shearing (CTS) manufacturing process, which introduces layer thickness variations as tows are steered, is explored. A mass reduction of 12.5% and 13.2% is obtained by using the constant-thickness VAT and variable-thickness CTS designs, respectively, compared to a baseline quasi-isotropic straight-fibre design. The optimised wing-skin thickness distribution also suggests that local buckling is the critical failure mode in specific regions, and therefore needs to be included during aeroelastic optimisation.

[1]  A. Baker,et al.  Composite Materials for Aircraft Structures , 2004 .

[2]  Holger Wendland,et al.  Error Estimates for Interpolation by Compactly Supported Radial Basis Functions of Minimal Degree , 1998 .

[3]  Chris Waldhart,et al.  Analysis of Tow-Placed, Variable-Stiffness Laminates , 1996 .

[4]  Christine V. Jutte,et al.  Aeroelastic benefits of tow steering for composite plates , 2014 .

[5]  Seung-Kil Paek,et al.  Flutter analysis for control surface of launch vehicle with dynamic stiffness , 1996 .

[6]  Ginu Rajan,et al.  Automated fibre placement based composite structures: Review on the defects, impacts and inspections techniques , 2019, Composite Structures.

[7]  Zafer Gurdal,et al.  A Theoretical Model to Study the Influence of Tow-drop Areas on the Stiffness and Strength of Variable-stiffness Laminates , 2009 .

[8]  Damiano Pasini,et al.  Optimum stacking sequence design of composite materials Part II: Variable stiffness design , 2010 .

[9]  Damiano Pasini,et al.  Experimental study of the effect of automated fiber placement induced defects on performance of composite laminates , 2011 .

[10]  Richard Butler,et al.  Out-of-plane ply wrinkling defects during consolidation over an external radius , 2014 .

[11]  M. W. Hyer,et al.  Use of curvilinear fiber format in composite structure design , 1991 .

[12]  Marco Montemurro,et al.  On the effective integration of manufacturability constraints within the multi-scale methodology for designing variable angle-tow laminates , 2017 .

[13]  Christopher Sacco,et al.  Machine learning in composites manufacturing: A case study of Automated Fiber Placement inspection , 2020 .

[14]  W. P. Rodden,et al.  Aerodynamic lag functions, divergence, and the British flutter method , 1982 .

[15]  Paul M. Weaver,et al.  Continuous tow shearing for manufacturing variable angle tow composites , 2012 .

[16]  Paul M. Weaver,et al.  Postbuckling optimisation of a variable angle tow composite wingbox using a multi-modal Koiter approach , 2019, Thin-Walled Structures.

[17]  J.-B. Le Cam,et al.  Modelling slit tape buckling during automated prepreg manufacturing: A local approach , 2011 .

[18]  Paul M. Weaver,et al.  Postbuckling analysis of variable angle tow composite plates under shear load , 2013 .

[19]  K. Potter,et al.  The engineering aspects of automated prepreg layup: History, present and future , 2012 .

[20]  R. Butler,et al.  Buckling optimization of variable-angle-tow panels using the infinite-strip method , 2013 .

[21]  Z. Gürdal,et al.  Variable stiffness composite panels : Effects of stiffness variation on the in-plane and buckling response , 2008 .

[22]  Yang Chao,et al.  A Highly Efficient Aeroelastic Optimization Method Based on a Surrogate Model , 2016 .

[23]  Jonathan E. Cooper,et al.  Optimization of Tow-Steered Composite Wing Laminates for Aeroelastic Tailoring , 2014 .

[24]  Rainer Groh,et al.  Post-buckling analysis of variable-angle tow composite plates using Koiter's approach and the finite element method , 2017 .

[25]  Paul M. Weaver,et al.  Manufacturing characteristics of the continuous tow shearing method for manufacturing of variable angle tow composites , 2014 .

[26]  Michael W. Hyer,et al.  Innovative design of composite structures: The use of curvilinear fiber format to improve buckling resistance of composite plates with central circular holes , 1990 .

[27]  Ramy Harik,et al.  Geometrical modeling of tow wrinkles in automated fiber placement , 2020 .

[28]  Chao Yang,et al.  Aeroelastic optimization on composite skins of large aircraft wings , 2012 .

[29]  Z. Gürdal,et al.  Design of variable stiffness composite panels for maximum fundamental frequency using lamination parameters , 2007 .

[30]  Jerzy Warminski,et al.  A review on the mechanical behaviour of curvilinear fibre composite laminated panels , 2014 .

[31]  Damiano Pasini,et al.  Optimization of variable stiffness composites with embedded defects induced by Automated Fiber Placement , 2014 .

[32]  Howard M. Adelman,et al.  Evaluation of the Tensor Polynomial and Hoffman Strength Theories for Composite Materials , 1977 .

[33]  L. Lessard,et al.  Surrogate-based multi-objective optimization of a composite laminate with curvilinear fibers , 2012 .

[34]  Z. Gürdal,et al.  In-plane response of laminates with spatially varying fiber orientations - Variable stiffness concept , 1993 .

[35]  Jonathan E. Cooper,et al.  Aeroelastic Tailoring of a Representative Wing-Box Using Tow-Steered Composites , 2017 .