Critical load and application of core-separated buckling-restrained braces

Abstract A new type of buckling-restrained braces (BRBs), called core-separated buckling-restrained braces (CSBRBs) is presented and investigated in this study. The CSBRBs are composed of two chord members and one or several continuous web plates that connect those members longitudinally. This core-separated section improves bending stiffness, thus resulting in lightness and convenience in fabrication and erection compared with conventional BRBs. The elastic buckling performance of CSBRBs is initially investigated because such performance depends directly on the restrain ratios, which should be specified in the design of all types of BRBs. The critical loads of pin-ended and fix-ended CSBRBs are then obtained based on the equilibrium method and verified by finite element (FE) elastic buckling analysis, respectively. Subsequently, the relationship between axial compression and core compressive strain of CSBRBs with different restrain ratios is studied by using FE elasto-plastic analysis. These research achievements provide the foundation for further investigations and applications for CSBRBs.

[1]  Robert Tremblay,et al.  Seismic testing and performance of buckling- restrained bracing systems , 2006 .

[2]  Francesco Genna,et al.  Analysis of the Lateral Thrust in Bolted Steel Buckling-Restrained Braces. I: Experimental and Numerical Results , 2012 .

[3]  William T. Holmes,et al.  The 1997 NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures , 2000 .

[4]  S. Timoshenko.  Theory of Elastic Stability , 1936 .

[5]  Chung-Che Chou,et al.  Subassemblage tests and finite element analyses of sandwiched buckling-restrained braces , 2010 .

[6]  G. Ravi Kumar,et al.  Behaviour of frames with Non-Buckling bracings under earthquake loading , 2007 .

[7]  Tsutomu Usami,et al.  Developing high‐performance aluminum alloy buckling‐restrained braces based on series of low‐cycle fatigue tests , 2012 .

[8]  Mamoru Iwata,et al.  Buckling‐restrained brace using steel mortar planks; performance evaluation as a hysteretic damper , 2006 .

[9]  V Kalyanaraman,et al.  Core loaded earthquake resistant bracing system , 1998 .

[10]  Hans H. Bleich,et al.  Buckling strength of metal structures , 1952 .

[11]  Jinkoo Kim,et al.  Component tests of buckling-restrained braces with unconstrained length , 2009 .

[12]  James M. Ricles,et al.  Experimental Evaluation of a Large-Scale Buckling-Restrained Braced Frame , 2007 .

[13]  Francesco Genna,et al.  Analysis of the Lateral Thrust in Bolted Steel Buckling-Restrained Braces. II: Engineering Analytical Estimates , 2012 .