Tailoring the elastic postbuckling response of cylindrical shells: A route for exploiting instabilities in materials and mechanical systems

Postbuckling response, long considered mainly as a failure limit state is gaining increased interest for smart applications, such as energy harvesting, frequency tuning, sensing, actuation, etc. This letter explores the potential of cylindrical shells under axial compression, for which localized buckling events along with high-rate local deformations can be attained in their elastic postbuckling regime under smaller axial system deformation input, as a prototype for harnessing elastic instabilities. Three avenues are presented to tailor and control the elastic postbuckling response of axially-compressed shells: (1) by introducing seeded geometric imperfections (SGI); (2) by introducing non-uniform stiffness distributions (NSD); and (3) by providing lateral constraints and interactions (LCI). Prototyped cylindrical shells were fabricated through 3D printing and tested under loading–unloading cycles. Experimental results show that, with appropriate selection of geometry, material, and stiffness distribution, these three concepts offer significant advantages over uniform cylindrical shells for use of their notoriously unreliable elastic postbuckling response. This work provides new knowledge on the possibilities and means to design the cylindrical shells with controlled elastic postbuckling behavior and opens new avenues for using this structural form for applications in smart materials and structures.