Simply-supported multi-layered beams for energy harvesting

This paper develops an analytical model for predicting the performance of simply-supported multi-layered piezoelectric vibrating energy harvesters. The model includes the effects of material and geometric non-linearities, as well as axial pre-tension/compression, and is validated against experimental devices for a large range of base accelerations. Numerical and experimental investigations are performed to understand the benefits of using simply-supported devices compared to cantilevered devices. Comparisons are made in an unbiased manner by tuning the resonant frequency to the same value by modifying the geometry, and the results obtained indicate that simply-supported devices are capable of generating higher voltage levels than cantilever devices. The model is also used to investigate the benefits of using multi-layered devices to improve power density. Depending on harvester composition, power-per-unit-volume of piezoelectric material for a device is increased through the stacking of layers.

[1]  Neil M. White,et al.  Improving Output Power of Piezoelectric Energy Harvesters using Multilayer Structures , 2011 .

[2]  Joshua A. Tarbutton,et al.  Electric poling-assisted additive manufacturing process for PVDF polymer-based piezoelectric device applications , 2014 .

[3]  Atanas A. Popov,et al.  Model refinements and experimental testing of highly flexible piezoelectric energy harvesters , 2016 .

[4]  Daniel J. Inman,et al.  Effect of Strain Nodes and Electrode Configuration on Piezoelectric Energy Harvesting From Cantilevered Beams , 2009 .

[5]  Kui Yao,et al.  Piezoelectric polymer multilayer on flexible substrate for energy harvesting , 2013, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control.

[6]  Zhu Liang,et al.  Bi-stable energy harvesting based on a simply supported piezoelectric buckled beam , 2013 .

[7]  Atanas A. Popov,et al.  Optimization of piezoelectric cantilever energy harvesters including non-linear effects , 2014 .

[8]  Rupesh Patel.  Modelling analysis and optimisation of cantilever piezoelectric energy harvesters , 2013 .

[9]  A. Bokaian,et al.  Natural frequencies of beams under compressive axial loads , 1988 .

[10]  P. Wright,et al.  Resonance tuning of piezoelectric vibration energy scavenging generators using compressive axial preload , 2006 .

[11]  Daniel J. Inman,et al.  A Distributed Parameter Electromechanical Model for Cantilevered Piezoelectric Energy Harvesters , 2008 .

[12]  L. Yao,et al.  Nonlinear dynamic characteristics of piezoelectric bending actuators under strong applied electric field , 2004, Journal of Microelectromechanical Systems.

[13]  A. Mathewson,et al.  Evaluation of low-acceleration MEMS piezoelectric energy harvesting devices , 2014 .

[14]  Meiling Zhu,et al.  Design study of piezoelectric energy-harvesting devices for generation of higher electrical power using a coupled piezoelectric-circuit finite element method , 2010, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[15]  Daniel J. Inman,et al.  Nonlinear nonconservative behavior and modeling of piezoelectric energy harvesters including proof mass effects , 2012 .

[16]  Dibin Zhu,et al.  A Bimorph Multi-layer Piezoelectric Vibration Energy Harvester , 2010 .

[17]  A. Bokaian,et al.  Natural frequencies of beams under tensile axial loads , 1990 .

[18]  Frederick A. Leckie,et al.  Matrix Methods in Elasto Mechanics , 1963 .