The effect of a substrate on the sintering of constrained films

[1]  R. Bordia,et al.  Influence of adhesion and friction on the geometry of packings of spherical particles. , 2008, Physical review. E, Statistical, nonlinear, and soft matter physics.

[2]  O. Guillon,et al.  Stress-induced anisotropy of sintering alumina: Discrete element modelling and experiments , 2007 .

[3]  O. Guillon,et al.  Constrained Sintering of Alumina Thin Films: Comparison Between Experiment and Modeling , 2007 .

[4]  O. Guillon,et al.  Anisotropic Microstructural Development During the Constrained Sintering of Dip‐Coated Alumina Thin Films , 2007 .

[5]  Luis Olmos,et al.  Discrete element modeling of metallic powder sintering , 2006 .

[6]  G. Messing,et al.  A novel use of constrained sintering to determine the viscous Poisson's ratio of densifying materials , 2005 .

[7]  Robert M. McMeeking,et al.  Deformation of Interparticle Necks by Diffusion-Controlled Creep , 2005 .

[8]  G. Messing,et al.  Determination of the Mechanical Response of Sintering Compacts by Cyclic Loading Dilatometry , 2005 .

[9]  J. Rödel,et al.  Shrinkage‐Free Sintering of Low‐Temperature Cofired Ceramics by Loading Dilatometry , 2004 .

[10]  Christophe L. Martin,et al.  Pore size distributions calculated from 3-D images of DEM-simulated powder compacts , 2003 .

[11]  Christophe L. Martin,et al.  Study of particle rearrangement during powder compaction by the Discrete Element Method , 2003 .

[12]  C. Josserond,et al.  Viscosity of WC-Co compacts during sintering , 2001 .

[13]  Jing-Song Pan,et al.  A model for the sintering of spherical particles of different sizes by solid state diffusion , 1998 .

[14]  Eugene A. Olevsky,et al.  Theory of sintering: from discrete to continuum , 1998 .

[15]  Robert M. McMeeking,et al.  A network model for initial stage sintering , 1998 .

[16]  A. Jagota,et al.  Viscosities and Sintering Rates of Composite Packings of Spheres , 1995 .

[17]  Y. Zhao,et al.  Theoretical model for the analysis of a ceramic thin film sintering on a non-sintering substrate , 1994 .

[18]  H. Veringa,et al.  A computer simulation method for sintering in three-dimensional powder compacts , 1994, Journal of Materials Science.

[19]  J. Svoboda,et al.  Equilibrium pore surfaces, sintering stresses and constitutive equations for the intermediate and late stages of sintering—II. Diffusional densification and creep , 1994 .

[20]  A. Jagota,et al.  Crack Growth and Damage in Constrained Sintering Films , 1993 .

[21]  R. McMeeking,et al.  A diffusional creep law for powder compacts , 1992 .

[22]  Rajendra K. Bordia,et al.  On constrained sintering—I. Constitutive model for a sintering body , 1988 .

[23]  G. Scherer,et al.  On constrained sintering-II. Comparison of constitutive models , 1988 .

[24]  R. Raj,et al.  Sintering Behavior of Ceramic Films Constrained by a Rigid Substrate , 1985 .

[25]  G. Scherer,et al.  Viscous Sintering on a Rigid Substrate , 1985 .

[26]  E. Arzt The influence of an increasing particle coordination on the densification of spherical powders , 1982 .

[27]  S. Nemat-Nasser,et al.  A Micromechanical Description of Granular Material Behavior , 1981 .

[28]  G. Scherer Sintering inhomogeneous glasses: Application to optical waveguides , 1979 .

[29]  M. Ashby,et al.  On grain boundary sliding and diffusional creep , 1971 .

[30]  Robert L. Coble,et al.  Initial Sintering of Alumina and Hematite , 1958 .

[31]  Ping Xiao,et al.  Constrained sintering of YSZ/Al2O3 composite coatings on metal substrates produced from eletrophoretic deposition , 2007 .

[32]  H. Riedel,et al.  Simulations of the influence of rearrangement during sintering , 2007 .

[33]  O. Guillon,et al.  Influence of thickness on the constrained sintering of alumina films , 2007 .

[34]  O. Guillon,et al.  Anisotropic constitutive laws for sintering bodies , 2006 .

[35]  Zhigang Suo,et al.  A model for the sintering and coarsening of rows of spherical particles , 1999 .

[36]  H. Riedel,et al.  New solutions describing the formation of interparticle necks in solid-state sintering , 1995 .