Using similarity theory to design natural gas hydrate experimental model

Abstract Experimental simulation is an important approach to study the gas hydrate dissociation mechanism, and similarity theory is an effective tool for the design of experimental model. Based on hydrate kinetic reaction model in HydrateResSim, seventy-three similarity numbers are derived by means of inspectional analysis and dimensionless analysis. Gas production from the natural gas hydrate reservoir is controlled by two mechanisms, namely dissociation-controlled mechanism and flow-controlled mechanism. Two groups of schemes are put forward for the design of experimental model of natural gas hydrate according to these two mechanisms respectively: for flow-controlled hydrate reservoir the scale of injection rate of heat and water, and parameters associated with size is the same with that of length, the scale of time is the square of length scale; for dissociation-controlled hydrate reservoir, the scale of parameters associated with size is the same with that of length, the scale of absolute permeability is 4/3 times square of length scale, the scale of time is 2/3 times square of length scale, the scale of injection rate of heat and water is 7/3 times square of length scale.

[1]  B. Buffett,et al.  Formation of gas hydrate from dissolved gas in natural porous media , 2000 .

[2]  E. D. Sloan,et al.  Experimental Investigation of Hydrate Formation and Dissociation in Consolidated Porous Media , 1991 .

[3]  George J. Moridis,et al.  Numerical Studies of Gas Production From Methane Hydrates , 2003 .

[4]  Shuxia Li,et al.  Similarity theory for the physical simulation of natural gas hydrate reservoir development , 2010 .

[5]  R. D. Malone,et al.  A Multi-Phase, Multi-Dimensional, Variable Composition Simulation of Gas Production From a Conventional Gas Reservoir in Contact With Hydrates , 1986 .

[6]  William P. Dillon,et al.  APPARATUS INVESTIGATES GEOLOGICAL ASPECTS OF GAS HYDRATES , 1999 .

[7]  Gang Li,et al.  Control Mechanisms for Gas Hydrate Production by Depressurization in Different Scale Hydrate Reservoirs , 2007 .

[8]  I. Kataoka,et al.  Similarity analysis and scaling criteria for LWRs under single-phase and two-phase natural circulation , 1983 .

[9]  M. H. Yousif,et al.  Experimental and Theoretical Investigation of Methane-Gas-Hydrate Dissociation in Porous Media , 1991 .

[10]  Kishore K. Mohanty,et al.  1-D Modeling of Hydrate Depressurization in Porous Media , 2005 .

[11]  M. Kowalsky,et al.  TOUGH+Hydrate v1.0 User's Manual: A Code for the Simulation of System Behavior in Hydrate-Bearing Geologic Media , 2008 .

[12]  Bai Yu-hu.  Numerical Study on Dissociation of Gas Hydrate and Its Sensitivity to Physical Parameters , 2007 .

[13]  Kishore K. Mohanty,et al.  Kinetic simulation of methane hydrate formation and dissociation in porous media , 2006 .

[14]  H. O. Kono,et al.  Synthesis of methane gas hydrate in porous sediments and its dissociation by depressurizing , 2002 .

[15]  J. Geertsma,et al.  Theory of Dimensionally Scaled Models of Petroleum Reservoirs , 1956 .

[16]  J. W. Amyx,et al.  Petroleum reservoir engineering : physical properties , 1960 .

[17]  Yan Du,et al.  The simulation of nature gas production from ocean gas hydrate reservoir by depressurization , 2008 .

[18]  George J. Moridis,et al.  Comparison of kinetic and equilibrium reaction models in simulating gas hydrate behavior in porous media , 2006 .

[19]  Qingping Li,et al.  Simulation of gas production from hydrate reservoir by the combination of warm water flooding and depressurization , 2010 .