A notch analysis of fracture approach to fatigue crack propagation

A model of fatigue crack growth is proposed that utilizes the recent developments in notch analysis of fracture and a concept of size effect that results from the changes in the critically stressed volume ahead of a crack tip. Accordingly, the fatigue crack growth mechanism involves local stresses reaching the theoretical cohesive strength and causing brittle fracture of atomic bonds at nominal stresses near the threshold, whereas slip-plane decohesion and plastic blunting and resharpening of the crack tip process may occur at stresses above the threshold range. The model contains three material parameters σFF nF, and ρF, that conveniently extend continuum analysis to situations where inhomogeneity of the material structure can influence the behavior appreciably. The analytical expression from the model was found to correlate fatigue crack growth data reasonably well in the low and intermediate stress ranges in Al 2024-T3, Al 7075-T6 and 250 grade maraging steel. The fracture modes observed are in agreement with the predictions from the model. The same fatigue crack growth model can be extended to estimating the threshold stress intensity factor range, ΔKo and fatigue notch sensitivity of different materials.

[1]  V. Weiss.  NOTCH ANALYSIS OF FRACTURE , 1971 .

[2]  L. P. Pook,et al.  A fracture mechanics analysis of fatigue crack growth data for various materials , 1971 .

[3]  Peter Joseph Edward Forsyth,et al.  The physical basis of metal fatigue , 1969 .

[4]  G. Birkbeck,et al.  Aspects of Stage II fatigue crack propagation in low-carbon steel , 1971 .

[5]  B. Hopkins,et al.  The effect of purity on fatigue crack growth in a high-strength steel , 1971 .

[6]  R. B. Heywook.  Designing against fatigue of metals , 1962 .

[7]  R. J. Cooke,et al.  The slow fatigue crack growth and threshold behaviour of a medium carbon alloy steel in air and vacuum , 1975 .

[8]  Kiyotsugu Ohji,et al.  Cyclic analysis of a propagating crack and its correlation with fatigue crack growth , 1975 .

[9]  Takashi Miyata,et al.  The condition of fatigue crack growth in mixed mode condition , 1975 .

[10]  G. Smith,et al.  Initial stages of damage in high stress fatigue in some pure metals , 1963 .

[11]  B. Tomkins.  FATIGUE CRACK PROPAGATION: AN ANALYSIS. , 1968 .

[12]  Rosenfeld.  Damage Tolerance in Aircraft Structures , 1971 .

[13]  Fatigue-crack propagation characteristics of aluminum alloys in thick sections , 1972 .

[14]  C. Feltner,et al.  Microplastic Strain Hysteresis Energy as a Criterion for Fatigue Fracture , 1961 .

[15]  Volker Weiss,et al.  A note on the threshold condition for fatigue crack propagation , 1974 .

[16]  W. Weibull.  CHAPTER II – FATIGUE TESTING METHODS , 1961 .

[17]  V. Weiss,et al.  An analysis of non-propagating fatigue cracks , 1975 .

[18]  The study of fracture surface profiles in the electron microscope , 1970 .

[19]  Propagation of Fatigue Cracks in Various Sheet Materials , 1959 .

[20]  P. C. Paris,et al.  A Critical Analysis of Crack Propagation Laws , 1963 .

[21]  M. Gell,et al.  The characteristics of stage I fatigue fracture in a highstrength nickel alloy , 1968 .