The Effects of Filtration on Pressure Drop and Energy Consumption in Residential HVAC Systems (RP-1299)

The use of high-efficiency HVAC filters is a common strategy to control exposure to airborne particulate matter in residential buildings. However, high-efficiency filters generally have a higher pressure drop and are widely assumed to have large energy penalties. In this paper, we explore the underlying theoretical energy implications of high-pressure-drop filters and we present the results of a four-month-long period of detailed energy monitoring of two air-conditioning systems in a test home in Austin, Texas. A theoretical analysis shows that the magnitude of potential energy impacts associated with high-efficiency filters are overall likely to be small and can result in either a net savings or additional expenditure, depending on the system. The measured results in the test systems confirm these findings, and energy consumption generally did not differ with high-efficiency filters compared to low-efficiency filters. These results suggest caution when assuming that high-efficiency filters require more energy than low-pressure-drop filters in residential HVAC systems.

[1]  Atila Novoselac,et al.  Energy Implications of Filtration in Residential and Light-Commercial Buildings , 2010 .

[2]  Bob Davis,et al.  Measuring residential duct efficiency with the short-term coheat test methodology , 2006 .

[3]  Michael J. Chimack.  Using Extended Surface Air Filters in Heating Ventilation and Air Conditioning Systems: Reducing Utility and Maintenance Costs while Benefiting the Environment , 2000 .

[4]  H. Sachs,et al.  Residential HVAC Fans and Motors Are Bigger than Refrigerators , 2002 .

[5]  M S Waring,et al.  Particle loading rates for HVAC filters, heat exchangers, and ducts. , 2008, Indoor air.

[6]  Max H. Sherman,et al.  Saving Tons at the Register , 1998 .

[7]  Dennis L. O'Neal,et al.  Effect of reduced evaporator airflow on the high temperature performance of air conditioners , 1996 .

[8]  Max H. Sherman,et al.  Delivering tons to the register: Energy efficient design and operation of residential cooling systems , 2000 .

[9]  Michael D. Sohn,et al.  Analyzing a database of residential air leakage in the United States , 2005 .

[10]  Max H. Sherman.  Infiltration in ASHRAE's Residential Ventilation Standards , 2008 .

[11]  W. Fisk,et al.  Performance and costs of particle air filtration technologies. , 2002, Indoor air.

[12]  Dennis L. O'Neal,et al.  Return Air Leakage Impact on Air Conditioner Performance in Humid Climates , 2002 .

[13]  Piotr A. Domanski,et al.  Performance of a residential heat pump operating in the cooling mode with single faults imposed , 2009 .

[14]  Jeff Haberl,et al.  The Effect of Reduced Evaporator Air Flow on the Performance of a Residential Central Air Conditioner , 1992 .

[15]  新 雅夫,et al.  ASHRAE(American Society of Heating,Refrigerating and Air-Conditioning Engineers)大会"国際年"行事に参加して , 1975 .

[16]  D. B. Shirey,et al.  Impact of evaporator coil airflow in residential air-conditioning systems , 1997 .

[17]  James E. Braun,et al.  The impact of evaporator fouling and filtration on the performance of packaged air conditioners , 2007 .