Synthesis and analysis of a flexible elephant trunk robot

This paper presents a novel synthesis and analysis of a flexible elephant trunk robot (biological continuum–style manipulator). The robot includes eight flexible segments, although it can be extended to more segments as necessary. In this study the gravity of the springs is neglected due to the fact that the manipulation force is much larger than these gravity forces. This mechanism exhibits a wide range of maneuverability and has a large number of degrees of freedom. Each segment is designed using a novel flexible mechanism based on the loading of a compression spring in both transverse and axial directions, and using cable–conduit systems. The rotational motion is transformed to tendon-like behavior, which enables the location of the actuators away from the trunk (e.g. at the end of the trunk). The forward kinematics of the mechanism is also presented and lends itself well to computer control. It is shown that the solution of the transverse deflection of each segment is obtained in a general form, while the stiffness coefficients are obtained in closed form from a two-dimensional model (small and large deflection angles) and from a three-dimensional model used in a finite element method to verify results. The friction in the analysis between the cable and the conduit is neglected in the analysis. A prototype trunk segment is experimentally tested, the results are verified and the elephant trunk robot is built. A bench-top actuation system has been developed and a control scheme used in prosthetic hand control has been implemented to control the mechanism.

[1]  Gregory S. Chirikjian,et al.  The kinematics of hyper-redundant robot locomotion , 1995, IEEE Trans. Robotics Autom..

[2]  Gregory S. Chirikjian,et al.  A general numerical method for hyper-redundant manipulator inverse kinematics , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.

[3]  G. S. Chirikjian,et al.  Theory and Applications of Hyper-Redundant Robotic Mechanisms , 1992 .

[4]  Ian D. Walker,et al.  Analysis and experiments with an elephant's trunk robot , 2001, Adv. Robotics.

[5]  Jean-Arcady Meyer,et al.  Biologically Inspired Robots , 2008, Springer Handbook of Robotics.

[6]  Ian A. Gravagne,et al.  Manipulability, force, and compliance analysis for planar continuum manipulators , 2002, IEEE Trans. Robotics Autom..

[7]  J. Bruce C. Davies,et al.  Continuum robots - a state of the art , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[8]  Gregory S. Chirikjian,et al.  A modal approach to hyper-redundant manipulator kinematics , 1994, IEEE Trans. Robotics Autom..

[9]  Christopher D. Rahn,et al.  Design of Continuous Backbone, Cable-Driven Robots , 2002 .

[10]  Kevin L Kilgore,et al.  Simulated neuroprosthesis state activation and hand-position control using myoelectric signals from wrist muscles. , 2004, Journal of rehabilitation research and development.

[11]  Hiromi Mochiyama,et al.  The shape Jacobian of a manipulator with hyper degrees of freedom , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[12]  Daryl Balfour,et al.  African Elephants: A Celebration of Majesty , 1997 .

[13]  Hiromi Mochiyama,et al.  Shape correspondence between a spatial curve and a manipulator with hyper degrees of freedom , 1998, Proceedings. 1998 IEEE/RSJ International Conference on Intelligent Robots and Systems. Innovations in Theory, Practice and Applications (Cat. No.98CH36190).

[14]  Shoichi Iikura,et al.  Development of flexible microactuator and its applications to robotic mechanisms , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[15]  Michael Kremer,et al.  Elephants , 1996 .

[16]  Hiromi Mochiyama,et al.  Direct kinematics of manipulators with hyper degrees of freedom and Frenet-Serret formula , 1998, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146).

[17]  Gregory S. Chirikjian,et al.  Kinematically optimal hyper-redundant manipulator configurations , 1992, Proceedings 1992 IEEE International Conference on Robotics and Automation.

[18]  Adam Morecki,et al.  Elephant trunk type elastic manipulator - a tool for bulk and liquid materials transportation , 1999, Robotica.

[19]  R. Palaninathan,et al.  Curved beam element stiffness matrix formulation , 1985 .

[20]  I. Walker,et al.  NOVEL KINEMATICS FOR CONTINUUM ROBOTS , 2000 .

[21]  Ian D. Walker,et al.  Kinematics for Constrained Continuum Robots Using Wavelet Decomposition , 2000 .

[22]  Ian A. Gravagne,et al.  On the kinematics of remotely-actuated continuum robots , 2000, Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065).

[23]  Ian D. Walker,et al.  Analysis and initial experiments for a novel elephant's trunk robot , 2000, Proceedings. 2000 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2000) (Cat. No.00CH37113).