The Influence of Thermal Cycles on the Microstructure of Grade 92 Steel

[1]  R. Sarpong,et al.  Bio-inspired synthesis of xishacorenes A, B, and C, and a new congener from fuscol , 2019, Chemical science.

[2]  K. Sawada,et al.  Microstructure characterization of heat affected zone after welding in Mod.9Cr–1Mo steel , 2015 .

[3]  A. K. Bhaduri,et al.  Influence of boron and nitrogen on microstructure and hardness of heat-affected zone of modified 9Cr–1Mo steel—Gleeble simulation study , 2015, Welding in the World.

[4]  M. D. Mathew,et al.  Creep rupture behavior of 9Cr–1.8W–0.5Mo–VNb (ASME grade 92) ferritic steel weld joint , 2014 .

[5]  D J Abson,et al.  Review of type IV cracking of weldments in 9–12%Cr creep strength enhanced ferritic steels , 2013 .

[6]  F. Abe,et al.  Formation Mechanism of Type IV Failure in High Cr Ferritic Heat-Resistant Steel-Welded Joint , 2013, Metallurgical and Materials Transactions A.

[7]  Michael L Santella,et al.  Influence of Chemical Compositions on Lower Ferrite-Austenite Transformation Temperatures in 9% Cr Steels , 2012 .

[8]  K. B. S. Rao,et al.  Characterization of Microstructures across the Heat-Affected Zone of the Modified 9Cr-1Mo Weld Joint to Understand Its Role in Promoting Type IV Cracking , 2007 .

[9]  John Francis,et al.  Review Type IV cracking in ferritic power plant steels , 2006 .

[10]  L. Ryde.  Application of EBSD to analysis of microstructures in commercial steels , 2006 .

[11]  Hidekazu Murakawa,et al.  Numerical simulation of temperature field and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurements , 2006 .

[12]  Yoritoshi Minamino,et al.  Crystallographic features of lath martensite in low-carbon steel , 2006 .

[13]  Y. Mishima,et al.  Phase Equilibrium between Austenite and MX Carbonitride in a 9Cr-1Mo-V-Nb Steel , 2005 .

[14]  S. Ozaki,et al.  Characterization of carbides at different boundaries of 9Cr-steel , 2004 .

[15]  M. E. Kassner,et al.  Creep cavitation in metals , 2003 .

[16]  Kenji Shinozaki,et al.  Observation of type IV cracking in welded joints of high chromium ferritic heat resistant steels , 2003 .

[17]  Kenta Suzuki,et al.  Two-phase Separation of Primary MX Carbonitride during Tempering in Creep Resistant 9Cr1MoVNb Steel , 2003 .

[18]  Kiyoshi Kubo,et al.  Variation in the Type IV cracking behaviour of a high Cr steel weld with post weld heat treatment , 2003 .

[19]  A. Czyrska-Filemonowicz,et al.  Recent advances in creep-resistant steels for power plant applications , 2003 .

[20]  F. J. Humphreys.  Review Grain and subgrain characterisation by electron backscatter diffraction , 2001 .

[21]  K. Laha,et al.  Microstructure and tensile properties of modified 9Cr–1Mo steel (grade 91) , 2001 .

[22]  M. Phaneuf,et al.  Applications of focused ion beam microscopy to materials science specimens , 1999 .

[23]  James A. Gianetto,et al.  Heat-Affected Zone Toughness of a TMCP Steel Designed for Low-Temperature Applications , 1997 .

[24]  Stan A David,et al.  Trends in Welding Research , 1986 .

[25]  A. Götte,et al.  Metall , 1897 .

[26]  K. Shinozaki,et al.  Investigation of precipitation behavior in a weld deposit of 11Cr-2W ferritic steel , 2005 .

[27]  R. Honeycombe.  Steels, Microstructure and Properties , 1982 .